RFMW Ltd. announces design and sales support for the Qorvo TQL9062, an internally matched, LNA gain block suitable for applications spanning 0.5 to 6 GHz. The TQL9062 features a ‘shutdown’ mode requiring 1.8 V TTL logic and supporting both TDD and FDD systems such as repeaters, DAS, defense communications and infrastructure applications where efficiency and range are important. Noise Figure is noted as 1.5 dB while mid-band gain is 15.5 dB and OIP3 is >40 dBm.
RFMW Ltd. announces design and sales support for the Qorvo TQP9218, a quarter watt (24.5 dBm) and highly efficient power amplifier covering 1805 to 1880 MHz. ACLR at 24 dBm is -48 dBc. The TQP9218 is internally matched for ease of design and offers good linear performance without the need for linearization. Running from a nominal 4.5 V supply, the TQP9218 draws 240 mA and boasts 16% PAE while offering 31 dB of gain.
RFMW Ltd. announces design and sales support for the PE42723 UltraCMOS SPDT RF switch from Peregrine Semiconductor. Achieving -121 dBc second harmonic and -140 dBc third harmonic at 17 MHz, the PE42723 exceeds the linearity requirements of the DOCSIS 3.1 cable industry standard and enables a dual upstream/downstream band architecture in cable customer premises equipment (CPE) devices spanning 5 to 1794 MHz.
RFMW Ltd. announces design and sales support for an AEC-Q200 qualified bulk acoustic wave (BAW) filter designed for 2.4 GHz WLAN/WiFi/blue tooth coexistence with 4G LTE and TD-LTE signals. The Qorvo 885071-A offers high rejection in adjacent bands B7, B38, B40 and B41 allowing these various technologies to operate simultaneously and in close proximity. Qorvo’s 885071-A has a usable bandwidth of 100 MHz (2400 to 2500 MHz).
RFMW Ltd. announces design and sales support for the Qorvo TGA2752-SM, QFN packaged 10 W power amplifier operating from 7.1 to 8.5 GHz. The TGA2752-SM provides 28 dB of gain and contains an integrated power detector. No external matching components are required, easing design in point to point amplifiers and C-band linear satellite communication systems.
RFMW Ltd. announces design and sales support for two Skyworks Inc. high power, PIN diodes suitable for T/R and attenuator applications. The SMP1331-085LF (shunt connected) and SMP1331-087LF (series connected) diodes are capable of handling 50 W CW power in a shunt connected switch configuration. Large signal attenuator applications ranging from 10 MHz to beyond 6 GHz are also possible. 
RFMW Ltd. announces design and sales support for a 10 W GaN power amplifier providing broadband coverage from 6 to 18 GHz. The Qorvo TGA2574 boasts 20 dB of small signal gain and operates from a 28 V supply drawing 1.5 A. PAE is >15%. The Qorvo TGA2574 serves EW, radar and instrumentation markets and provides world-class power / PAE / gain versus bandwidth. 
RFMW Ltd. announces design and sales support for the Qorvo TGF3021-SM GaN transistor offering over 30 W of P3 dB output power. Functioning from 30 MHz to 4 GHz, the TGF3021-SM is a discrete GaN on SiC HEMT supporting multiple high power applications such as LMR radio, commercial and military radar, RF jammers and test instrumentation. Capable of both CW and pulsed performance, typical PAE is 72.7%. 
RFMW Ltd. announces design and sales support for the Qorvo TGA2239-CP high power MMIC amplifier offering 35 W of saturated CW output power for Ku-band applications. The Qorvo TGA2239-CP operates from 13.4 to 15.5 GHz with power added efficiency of >34% and small signal gain of 25.5 dB. Processed using GaN on SiC technology, the TGA2239-CP draws 900 mA from a 22 V supply.
RFMW Ltd. announces design and sales support for Qorvo’s TGA2214-CP, a broadband, 2 to 18 GHz GaN amplifier. Providing 4 W of saturated output power, the TGA2214-CP offers 22 dB of small signal gain and 13 dB of large signal gain. PAE is specified at >15% and the bias requirements are 22 V with 600 mA. The TGA2214-CP finds applications in EW, radar and test and measurement.