Articles by RFMW Ltd.

LowDrift BAW Filter: 885075

885075RFMW Ltd. announces design and sales support for the Qorvo 885075 BAW filter featuring LowDrift technology. LowDrift BAW filters have dramatically reduced temperature sensitivity resulting in improved insertion loss, longer battery life, and fewer service interruptions in final designs. The Qorvo 885075 is highly selective for B40 applications from 2300 to 2400 MHz and offers excellent W-Fi rejection. Insertion loss is 3 dB and Wi-Fi attenuation is specified at 34 dB.


Read More

Dual Matched-Pair LNA Targets Balanced Amps: TQL9066

Qorvo TQL9066RFMW Ltd. announces design and sales support for a dual, low noise amplifier (LNA) from Qorvo. The TQL9066 incorporates two, matched, E-pHEMT LNAs enabling balanced amplifier configurations with noise figure rated at 0.6 dB. Applicable for the first stage in receivers, the Qorvo TQL9066 finds homes in BTS transceivers, L-Band radios and tower mounted amplifiers operating from 0.05 to 1.5 GHz.


Read More

6 GHz Attenuators Series: P1AT-SAMF-6G2W

P1AT-SAMF-6G2WRFMW Ltd. announces design and sales support for a series of 6 GHz attenuators with electrically equivalent group delay. The P1AT-SAMF-6G2W series attenuators from P1dB, Inc. offer a cost effective solution for amplitude balancing parallel signals of varying RF power. Attenuation values range from 0 to 10 dB in 1dB steps along with values of 12, 15, 20, 30 and 40 dB.


Read More

Two Body Worn Antennas: 1065-028 / 1065-029

1065-028RFMW Ltd. announces design and sales support for two body worn antennas from Southwest Antennas. Model 1065-028 is a right-hand, circularly polarized (RHCP) antenna while model 1065-029 offers left-hand polarization (LHCP). Developed to offer a high performance, rugged antenna option, the antenna radome housing is resistant to damage from drops, being stepped or jumped on, and other potential abuse.


Read More

1000 W Pulsed Power Transistor: BLA6H0912LS-1000

BLA6H0912LS-1000RFMW Ltd. announces design and sales support fora 1000 W pulsed power transistor. Ampleon’s BLA6H0912LS-1000 offers excellent ruggedness for avionics applications such as Mode-S, TCAS, JTIDS, DME and TACAN applications in the 960 to 1215 MHz frequency range. The BLA6H0912LS-1000 has integrated ESD protection and excellent thermal stability. It is highly flexible with respect to pulse formats with typical rise and fall times of 11 and 5 nS respectively. Typical gain is 16 dB.


Read More

SMA 4-Hole Flange Connector: 1313000G051-000

1313000G051-000RFMW Ltd. announces design and sales support for the Delta Electronics Manufacturing 1313000G051-000, an 18 GHz SMA female, four-hole, flange mount connector with solder cup. Produced for commercial, industrial, and military applications where a quality SMA interconnect is required, the 1313000G051-000 connector body is stainless steel with gold plating per MIL-G-45204 and houses a Teflon dielectric. The center contact is gold plated.


Read More

Digital Step Attenuator: PE4314

PE4314RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE4314, a 75 ohm digital step attenuator (DSA) spanning a frequency range of 1 to 2500 MHz. The PE4314 offers 6-bit resolution with 0.5 dB steps providing 31.5 dB attenuation range. Its low distortion characteristics and 75 ohm circuit optimization make it ideal for CATV and multi-carrier applications. This DSA features Peregrine’s Glitch-less technology reducing attenuation state transitions to <0.5 dB.


Read More

S-Band GaN Amplifier: TGA2813-SM

TGA2813-SMRFMW Ltd. announces design and sales support for the Qorvo TGA2813-SM, a 3.1 to 3.6 GHz GaN amplifier providing 100W of saturated output power. With 24 dB of large signal gain and power added efficiency of 56%, the TGA2813-SM is ideal for commercial and military radar systems. The small, surface mount package measures 7 x 9 mm and is housed in a plastic QFN. Bias requirements are only 300 mA from a 30 V supply.


Read More

200 W Pulsed Limiter: TGL2927-SM

TGL2927-SMRFMW Ltd. announces design and sales support for the TGL2927-SM, a 200 W (pulsed) limiter for radar applications in the 2 to 4 GHz band. Manufactured by Qorvo using VPIN technology, the TGL2927-SM offers low insertion loss of <0.6 dB with a high return loss of 15 dB. With a low flat leakage rate of <18 dBm, this limiter protects receive chains in both commercial and military S-band radar. 


Read More