Require Registration

The published specifications for leakage current in RF power devices are often a source of concern and confusion for engineers and technicians. This paper examines the real meaning behind the leakage current specifications and offers guidance on properly testing a device for leakage current.

A case study, showing the design of an array antenna for the proximity fuse of an air defence missile, is performed to illustrate the combined use of Antenna Magus and FEKO.

Nov. 2011 White paper

We have a presentation available on our website that highlights Wireless InSite’s new capabilities. This short slideshow provides a more detailed look at the features the new release has to offer.

Post webinar white paper for attendees

This application note describes the noise figure measurement using the R&S Vector Network Analyzers of the ZVA and ZVT series. It explains the concept of measuring noise figure without the need for a characterized noise source. Furthermore, it discusses different measurement applications and the respective setup and implications. Some examples guide through the instrument setups and show measurement results as well.

This application note describes how to set up 3GPP FDD and LTE multicell and multi-UE scenarios with the R&S®SMU200A with a focus on routing and leveling of the baseband signals. Furthermore, it describes in detail how to determine the correct AWGN settings, i.e. how to calculate the required signal-to-noise ratio for the various scenarios.

TETRA, the TErrestrial Trunked RAdio, is the professional mobile radio standard (PMR) used world wide by governmental safety and security authorities and organizations, as well as by private utilities from energy suppliers through to transport. Rohde & Schwarz provide test instruments idealy suited for both the development and production of TETRA base stations and user equipment, as well as for network planning, network coverage and quality of service, network monitoring and optimization, maintenance, and service. This Application Note shows examples for measurements with R&S instruments covering the entire range of TETRA test requirements.

The effective number of bits (ENOB) is a way of quantifying the quality of an analog to digital conversion. A higher ENOB means that voltage levels recorded in an analog to digital conversion are more accurate. In an oscilloscope the ENOB is not just determined by the quality of the analog to digital converter but by the instrument as a whole. This application note explains how to measure the oscilloscope ENOB and shows results for the R&SâRTO for different settings.

Significant improvements in the quality and reliability of indoor WLAN communications are claimed for devices with MIMO technology applying 802.11n standards, which allow users to achieve a theoretical data rate up to 300-600 Mbps on a single transmission. This paper presents an analysis of a commercial 802.11n MIMO 2×3 dual band (2.4 and 5 GHz) system focusing on the operational throughput performance over an indoor environment for Line of Sight (LOS) and Non Line of Sight (NLOS) scenarios. Combined field strength distribution, throughput, and propagation-channel environments are examined, comparing physical measurements with simulation results generated in Remcom’s Wireless InSite.