Semiconductors / Integrated Circuits

An EM Simulator for MEMS and Real Life MMICs

Introduction to a low cost software package used to address the 3D EM analysis of structures involving complex substrates as encountered in common MMIC design
Product Feature An EM Simulator for MEMS and Real Life MMICs MEM Research Spoltore, Pescara, Italy Generally speaking, there are two large families of commercially available electromagnetic (EM) solvers. The first one is a general-purpose set, covering the analysis of arbitrarily shaped structures and using finite elements or differences,...
Read More

System-level Filter Design Methodology for WLAN-OFDM Transceivers

Presentation of system-level filter design methodology to efficiently constrain the implementation loss and complexity of a digital orthogonal frequency division multiplex (OFDM) transceiver
Technical Feature System-level Filter Design Methodology for WLAN-OFDM Transceivers Orthogonal frequency division multiplex (OFDM)-based WLAN standards target wireless communications in the 5 GHz band for consumer multimedia applications. Digital OFDM transceiver ICs, based on frequency domain equalization, have been presented. However, it is still a challenge to design a...
Read More

A New Planar Coupled-line Balun for Microwave Applications

Presentation of a simple and effective way to relax the narrow spacing requirement between coupled lines in conventional planar Marchand baluns
Technical Note A New Planar Coupled-line Balun for Microwave Applications This article presents a novel inward collateral coupled-line balun. The new design provides an effective and simple way to avoid the narrow line spacing used in conventional planar Marchand baluns. A new structure with l /4 collateral coupled-lines has...
Read More

Gain for Compressed Amplifiers

Examination of two approaches to the concept of gain, differential and ratiometric in compressed amplifiers
Tutorial Gain for Compressed Amplifiers There is growing interest in operating amplifiers into compression to achieve higher power-conversion efficiencies. It becomes constructive then to revisit the concept of amplifier gain, because when an amplifier operates in compression the general assumption that the output signal is directly proportional to the...
Read More

Monolithic RF Matrix Switches

Introduction to a new line of fully monolithic RF matrix switches for cellular infrastructure applications
Product Feature Monolithic RF Matrix Switches Peregrine Semiconductor Corp. San Diego, CA A new line of fully monolithic 4 x 6 RF matrix switches for cellular infrastructure applications has been introduced. The parts feature low insertion loss, very high port-to-port isolation and serial programmability. These designs represent the state-of-the-art...
Read More

A Low Cost Oscillator for Fiber-optic Applications

Introduction to a new oscillator for use in synchronous optical network applications
Product Feature A Low Cost Oscillator for Fiber-optic Applications A new, low cost oscillator has been introduced for use in synchronous optical network (SONET/SDH) OC-192 applications. The new frequency source utilizes an ultra-low noise active device technology that allows the oscillator to achieve very low overall phase noise performance....
Read More

A Distributed Amplifier for 40 Gbps Fiber-optic Communications Systems

Description of a distributed amplifier for a LiNbO3 modulator driver using double-doped AlGaAs/AlGaAs pseudomorphic HEMTs
Technical Feature A Distributed Amplifier for 40 Gbps Fiber-optic Communications Systems H. Shigematsu, M. Sato, T. Hirose and Y. Watanabe Fujitsu Laboratories Ltd. Atsugi, Japan In recent years, the rapid development of multimedia communications has generated a strong demand for high speed and high capacity transmission systems. Wavelength-division multiplexing...
Read More

Design of a Predistortive High Power Amplifier Using Carrier Complex Power Series Analysis

Introduction to a new carrier complex power series for linearizing the distortion effects of a high power amplifier
Technical Feature Design of a Predistortive High Power Amplifier Using Carrier Complex Power Series Analysis In this article, a new carrier complex power series for linearizing the distortion effects of a high power amplifier (HPA) is proposed. The amplitude (AM-to-AM) and phase (AM-to-PM) nonlinear characteristics of the HPA are...
Read More

The Use of Intermodulation Tables for Mixer Simulations

Use of intermodulation table files to accurately predict the output frequency content of an up-converting or down-converting mixer in system simulations
Technical Feature The Use of Intermodulation Tables for Mixer Simulations The use of intermodulation table (IMT) files can lead to accurate prediction of the output frequency content of an up-converting or down-converting mixer in system simulations. For best results, custom IMT files should be constructed from mixer output spectrum...
Read More

Output Power Improvement of a Push-push FET DRO by Using an Additional DR

Measurement of the output power level and phase noise property of nine conventional push-push dielectric resonator oscillators (DRO) incorporating an additional DR
Technical Note Output Power Improvement of a Push-push FET DRO by Using an Additional DR In this article, the output power level and phase noise properties of nine conventional push-push dielectric resonator oscillators (DRO) have been experimentally investigated while adding an identical dielectric resonator (DR) at the drain ports....
Read More