Mini-Circuits, Brooklyn, NY

Mini-Circuits’ expanded PMA3-series of wideband, ultra-low NF MMIC amplifiers operates in ranges between 5.5 and 20 GHz with exceptionally low noise figures of less than 1.5 dB.

Mini-Circuits’ PWR-18PWHS-RC power sensor operates from 0.05 to 18 GHz at a sample rate of 80 Msps and with an industry-leading minimum measurement range of -40 dBm in peak mode and -60 dBm in average mode. 

The ZVA-20543VG+ variable gain, medium power amplifier provides 50 dB of gain, with a 17 dB adjustable gain range. Gain adjustment is possible either digitally or by applying an analog control voltage ranging from 0 to +2.8V.

Although Silicon-on-Insulator (SOI) MMIC switches can achieve fast switching, wide bandwidth and high frequency and power, most come at high cost. GaAs MMIC switch designs achieve comparable performance at considerably lower cost with distinct advantages. Read why Mini-Circuits’ GaAs MMIC technology switches afford a compelling alternative to comparable SOI models.

Expanded lineup of switching solutions for test applications with new 4-way and 8-way TTL-controlled solid-state switches. These models feature a unique architecture that ensures high isolation across a wide bandwidth from 0.1 to 18 GHz. 

Rise above the noise floor challenges of W-Band with the Mini-Circuits’ WVA-751103LNX+ WR10 waveguide LNA. The 21 ±3 dB of gain at a typical NF of 3.5 dB eases the burden of characterizing the system.

Mini-Circuits continues to expand our selection of MMIC transistors with two new models built with non-ferrous leadframes, suitable for MRI systems and other applications where non-magnetic materials are a requirement. 

Mini-Circuits President, Ted Heil and Board Chair, Alicia Kaylie Yacoby announced that Jin Bains will join Mini-Circuits as CEO starting in July.

Mini-Circuits President Ted Heil and Board Chair Alicia Kaylie Yacoby announced that Jin Bains will join Mini-Circuits as CEO starting in July. 

Mini-Circuits’ BFHK-series of ultra-high stopband rejection LTCC filters accelerates the drive towards RF/microwave circuit miniaturization while completely redefining performance levels achievable by LTCC filters. The BFHK-series of filters now achieves stopband rejections in excess of 90 dB in a surface mount LTCC component consuming just a fraction of the footprint area of even high-k dielectric based planar solutions.