Würth Elektronik eiSos GmbH & Co. KG

Company Profile

Logo_WE_MTYE_RGB_pos  use.jpg

Würth Elektronik eiSos Group is a manufacturer of electronic and electromechanical components for the electronics industry and a technology company that spearheads pioneering electronic solutions. Würth Elektronik eiSos is one of the largest European manufacturers of passive components and is active in 50 countries. Production sites in Europe, Asia and North America supply a growing number of customers worldwide. 

The product range includes EMC components, inductors, transformers, RF components, varistors, capacitors, resistors, quartz crystals, oscillators, power modules, Wireless Power Transfer, LEDs, sensors, connectors, power supply elements, switches, push-buttons, connection technology, fuse holders and solutions for wireless data transmission.

The unrivaled service orientation of the company is characterized by the availability of all catalog components from stock without minimum order quantity, free samples and extensive support through technical sales staff and selection tools. 

Würth Elektronik is part of the Würth Group, the world market leader for assembly and fastening technology. The company employs 8,200 staff and generated sales of 1.33 Billion Euro in 2021.

Würth Elektronik: more than you expect!

Contact Information:


Phone: +49 7942 945-0
Fax: +49 7942 945-5000

Location:


Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Straße 1
Waldenburg 74638
Germany

Multimedia

Würth Elektronik Group

Würth Elektronik eiSos, manufacturer of electronic and electromechanical components, introduces itself. With more than 8.300 employees Würth Elektronik is present in over 50 countries. 

#askLorandt explains: Environmental sensors for pressure, temperature and acceleration

#askLorandt and Manfred explain the function of the pressure sensor and the accelerometer module

#askLorandt explains: MEMS acceleration Sensor‘s embedded tap function detection

Our technology ambassador Lorandt Foelkel demonstrated the MEMS 3-axis acceleration sensor tap function detection using interrupt signals.

#askLorandt explains: The difference between the transparent mode and the command mode

#askLorandt and Manfred shows the difference between the transparent mode and the command mode when addressing the RF modules.

Calypso WiFi Radio module for industrial applications by Würth Elektronik eiSos

The Calypso WLAN module is a compact WiFi module based on IEEE 802.11 b/g/n with a fully featured TCP/IP stack. The edge castellation, smart antenna configuration and an easy-to-use AT command style enables easy integration into any embedded application.

Flooding mesh with the Thyone-I radio module: explained and demonstrated

Thyone-I: the proprietary 2.4 GHz radio module with GPIO control

The Thyone-I module with a size of 8 x 12 mm is based on a Nordic SOC. With a 2,4 GHz proprietary radio platform it is ideal for low power IOT applications.

Unboxing the Evaluation Kit

With the Evaluation Kits you get the perfect tool, to set up your wireless connection or your sensors.

Taking into operation the Erinome-II GNSS evaluation board with Thyone-I RF interface

Using the Thyone-RF interface and batteries, you can operate the GNSS board in standalone mode and read the navigation data on our WENSS PC tool. Tracking your device has never been so easy!

Calypso Wi-Fi module: UART-to-Wi-Fi bridge with a live demo

The Calypso Wi-Fi module developed by Würth Elektronik eiSos is intended to be used as a radio sub-system in order to provide WLAN (IEEE 802.11b/g/n) communication capabilities to systems. The UART acts as the primary interface between the module and a host microcontroller. The module can be fully configured and controlled using a set of AT-commands sent as messages via UART. Once configured, the module independently manages WLAN connectivity allowing the host controller to utilize its resources for its application tasks.

Calypso Wi-Fi module: Dynamic web content using custom REST API with a live demo

Calypso Wi-Fi module: Remote GPIO control via Web interface with a live demo

The Calypso Wi-Fi module developed by Würth Elektronik eiSos is intended to be used as a radio sub-system in order to provide WLAN (IEEE 802.11b/g/n) communication capabilities to systems. The UART acts as the primary interface between the module and a host microcontroller. The module can be fully configured and controlled using a set of AT-commands sent as messages via UART. Once configured, the module independently manages WLAN connectivity allowing the host controller to utilize its resources for its application tasks.

Adrastea-I - High performance, ultra-low power consumption, multi-band LTE-M and NB-IoT module.

The Adrastea-I module has multi-band support and can be operated through one of two (LTE- M and NB-IoT) cellular communication technologies. This enables the support for international, multi-regional coverage. For example, wherever LTE-M does not have coverage, the Adrastea-I can be configured to use NB-IoT instead, and vice versa. The module is 3GPP Release-13 compliant, upgradable to Release-14.

Proteus-e – a low cost miniaturized Bluetooth® LE 5.1 module

The Proteus-e is a radio module for wireless communication between devices such as control systems, remote controls, sensors etc. On the basis of Bluetooth® LE 5.1, it offers fast and secure data transmission of data packages between two parties (point to point topology). Within these two parties, Proteus-e implements the Bluetooth LE role "peripheral". The other device (e.g. a Proteus-III or a smart phone) must implement Bluetooth® LE with the role as "central".
wurth-9-4-24wjt.jpg

WR-SMA PCB Solderless Coaxial Sockets

Würth Elektronik expands its SMA connector family for high frequency applications to include WR-SMA PCB Solderless. The SMA interface complies with the MIL-STD-348 standard, is designed for 50 Ohm, and supports up to 27 GHz

Learn More
800-800-max.jpg

Cellular Module for IoT Applications: Adrastea-I

Adrastea-I is a high performance, ultra-low power consumption, multi-band LTE-M and NB-IoT module. This cellular module, measuring only 13.4 × 14.6 × 1.85 mm, comes with integrated GNSS, integrated ARM Cortex M4 and 1MB Flash.


Learn More
1024-1024 (2).jpg

Themisto-I 915 MHz Radio Module

Themisto-I radio module features high output power and can attain ranges of up to 10 km. Proprietary network solutions for IIoT/M2M applications can be implemented in the shortest possible time using the slim module.

Learn More
899-892-max.jpg

4-in-1 Footprint

Ahigh degree of freedom with the radio module footprint. It is one quality proven hardware base, that prevents you from enormous costs of re-design in future already today.

Learn More
1024-1024.jpg

Calypso Wi-Fi Module

Calypso Wi-Fi module – a compact, fully integrated wireless module for embedded systems in industrial applications. 

Learn More
1855-1024.jpg

Analysis Tool Metis Analyzer Plug wM-BUS

The Metis-I and Metis-II wireless modules are among the innovative Würth Elektronik solutions for metering. In addition, the manufacturer is now launching the wireless M-Bus analysis tool "Metis Analyzer Plug wM-BUS" on the market. 

Learn More

Downloads

Influence of control loop by an Outputfilter

Application Note: Influence of control loop by an Outputfilter  /  Output voltage filtered without losses

Download

RFQ