Model LM-26G40G-14-20W-292MM is a high power limiter capable of withstanding an input power level of 20 W, 440 to 670 nsec pulse width, PRF 600 to 900 kHz, 40% duty cycle. This model operates in the 26.5 to 40 GHz frequency range. The insertion loss is 4.0 dB maximum, VSWR of 2.0:1 and 250 nsec response time and a typical leakage of +14 dBm.
PMI Model No. PEC3-33-218-20-15-SFF-HS-E is a 2.0 to 18.0 GHz low noise amplifier that provides greater than 33 dB of gain while maintaining a maximum gain flatness of ±2.0 dB maximum over the operating frequency. The noise figure is 4 dB typical and offers an OP1 dB of +20 dBm minimum and an OIP3 of +30 dBm typical. The operating voltage is +15 VDC and the current draw is typically 350 mA.
PMI amplifier Model PEC-38-30M18G-12-SFF is a broadband, low noise amplifier that operates over the 30 MHz to 18 GHz frequency range. This model provides 38 dB of gain and has a gain flatness of ±2.0 dB maximum.
PMI Model No. PBB-20-218-16-LCA is a 2.0 to 18.0 GHz low noise amplifier which provides 20 dB of gain while maintaining a gain flatness of ±2.0 dB maximum over the operating frequency. The noise figure is 4 dB typical and offers a typical OP 1 dB of +14 dBm minimum.
PMI Model No. PE2-1020-R518-12-SFF is a low noise amplifier that offers a positive gain slope versus frequency. This type of amplifier is useful when trying to equalize frequency flatness over a broad bandwidth. This model provides 10 dB of gain at 500 MHz and 20 dB of gain at 18 GHz.
PMI Model No. PEC-85-0R32R5-15LM-12-SFF is a limiting amplifier that operates over the frequency range of 300 MHz to 2.5 GHz. This model provides a gain of 85 dB typically and a limited output of +15 dBm ± 2.5 dBm.
PMI Model No. P4T-10G40G-60-T-GPO is a single pole, four throw, absorptive, solid-state switch that operated over the frequency range of 10 to 40 GHz. This model provides over 60 dB of isolation and has an insertion loss of 6 dB maximum. The VSWR is better than 2.0:1 into 50 ohm impedance.
The PS-360-DC-IR-9G10G is a 10-Bit digitally controlled 360 degree phase shifter that operates from 9.0 to 10.0 GHz. This model offers low insertion loss of 7.5 dB and a phase shift accuracy of ±0.6 degrees typically.
PMI Model No. PUB-15-30M20G-20-LCA is a 30MHz to 20.0GHz low noise amplifier which provides 15 dB of gain while maintaining a gain flatness of ±2.5 dB typically over the operating frequency. The noise figure is 3 dB typical and offers a typical OP1 dB of +20 dBm. The amplifier requires +12 to +15 VDC and the current draw is 225 mA typical.
PMI Model Number LM-30M3G-C3-1 is a high power limiter that operates from 30 MHz to 3.0 GHz. This limiter can handle input power levels up to 5 W CW and provides a maximum leakage of +10 dBm. The insertion loss is 1.2 dB maximum with a maximum VSWR of 1.5:1. The recovery time is less than 1 usec.