PMI Model No. PS-360-3237-8-292FF is a high speed, millimeter wave, 8-bit digitally controlled, phase shifter that operates over the frequency range of 32.0 to 37.0 GHz. This phase shifter offers a low insertion loss of 13 dB typically and maintains a VSWR of 1.8:1. The total phase shift range is 358.593° having a step size of 1.406° and switches between states in less than 500 ns.
PMI Model No. POB-16-48-22-LCA is a 4.0 to 8.0 GHz low noise amplifier which provides 16 dB of gain while maintaining a gain flatness of ±1.0 dB typically over the operating frequency. The noise figure is 3 dB typical and offers a typical OP1 dB of +22 dBm. The amplifier requires +12 to +15 VDC and the current draw is 225 mA typical.
PMI Model No. PSD-2G6G-CD-1 is high power, switch box assembly that provides protection to front-end receivers when in the presence of high power signals. This is accomplished by sensing the input signal level and then switching the input signal into 50 ohms terminations when a set threshold level is exceeded. This assembly operates from 2.0 to 6.0 GHz and can handle input power levels up to 10 W CW.
PMI Model No. LM-18G40G-18-1W-292FF is an ultra-high speed, millimeter wave, high power RF limiter that operates over the frequency range of 18.0 to 40.0 GHz. This limiter can handle input power levels up to 1 W CW and provides a leakage output power of +18 dBm maximum and +12 dBm typical.
PMI Model No. PEC3-40-1D6G2D7G-15LM-SFF is a limiting amplifier that operates over the frequency range of 1.6 to 2.7 GHz and offers a limited output of 15 dBm ± 2 dBm. The saturated power frequency flatness is ±1.5 dB maximum with a gain of 35 dB minimum and a typical noise figure of 4.5 dB. The 2nd harmonic rejection is 24 dBc typically with an OIP3 of +18 dBm typical.
PMI Model No. PE2-25-218-20-12-SFF is a 2.0 to 18.0 GHz low noise amplifier that provides greater than 25 dB of gain while maintaining a maximum gain flatness of ±1.5 dB maximum over the operating frequency. The noise figure is 4.5 dB typical and offers an OP1dB of +20 dBm minimum. The operating voltage is +12 to 15 VDC and the current draw is 300 mA maximum.
PMI model SDLVA-315M362M successive detection log video amplifiers (SDLVA) offers 65 dB dynamic range over the frequency range of 315 to 362 MHz. This model offers a fast rise time of 35 nsec maximum and a recovery time of less than 500 nsec. The unit is temperature compensated such that log accuracy over temperature remains less than +/-2.5 dB over the full operating temperature range of -33° to +77° C.
PMI Model No. PUB-15-500M20G-20-LCA is a 500 MHz to 20.0 GHz low noise amplifier which provides 15 db of gain while maintaining a gain flatness of ±1.75 db typically over the operating frequency. The noise figure is 3 dB typical and offers a typical OP1 dB of +20 dBm. The amplifier requires +12 to +15 VDC and the current draw is 225 mA typical.
PMI Model PS-180-4R15R3-SFF is a 0 /180 degrees, bi-phase modulator designed to operate over the 4.1 to 5.3 GHz frequency range. This model can handle RF input signal levels up to +30 dBm without damage; has an insertion loss of 3.0 dB maximum and a maximum VSWR of 1.7:1. A TTL control will switch between 0 degrees and 180 degrees phase states in less than 100 nsec. The required supply voltages are ±5 VDC.