We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
PMI Model No. PEC2-8G18G-21DBM-LM-SFF is an 8.0 to 18.0 GHz limiting amplifier that provides an nominal output power level of +20.0 dBm for an input power range of -50 to +10 dBm CW. This model has output power level versus frequency range compensation such that the limited output power has a flat frequency response. The unit is supplied in a small housing measuring only 2.98" x 0.78" x 0.36".
PMI Model No. PEC-14-127-8-12-SFF Rev B is a wide band front end amplifier that operates over the frequency range of 1.0 to 26.5 GHz. This model provides gain of 13 to 17 dBm and has a maximum gain flatness of +/-1.5 dB. The maximum noise figure is 5.5 dB from 1.0 to 20.0 GHZ and 6.0 dB from 20.0 to 26.5 GHz. The housing measures 0.83" x 0.75" x 0.36" and is supplied with removable SMA connectors.
PMI Model No. PA-40-17D521D5-5R0-36-12-292FF is a medium power amplifier that operates over the frequency range of 15.7 to 21.5 GHz. It has a nominal gain of 40 dB typical with a maximum gain flatness of +/-1.75 dB and a typical noise figure of 5.0 dB. It is supplied with SMA(F) connectors in a housing that measures 2.6" x 2.0" x 0.5"
PMI model number PIQ-85M18G-360/20-CD-2 is a vector modulator covering the frequency range of 85 MHz to 18 GHz. This unit provides an attenuator resolution of 0.08 dB and a phase shift resolution of 0.703125. The attenuation is phase invariant and the phase is amplitude invariant making it ideal for nulling unwanted signals. The unit can be specifically calibrated for any number of 100 MHz bands within the frequency range.
PMI Model No. P1T-9D25G-90-T-SFF is a high speed, solid state, single pole single throw switch capable of switching within 20 ns. The frequency range is 9.25 GHz (+/- 30 MHz) with > 90 Db of isolation.
PMI Model No. PE2-15-8G20G-4R0-20-SFF is a 8.0 to 20.0 GHz, low noise amplifier that provides 12 dB min of gain with a typical gain flatness of +/-1.25 dB. The noise figure is 4.0 dB typ and offers an OP1 dB of 20 dBm typ. The operating voltage is +11 to +15 VDC and the current draw is 225 mA nom.
PMI Model No. PE2-30-1R06R0-1R5-22-12-SFF is a 1.0 to 6.0 GHz, low noise amplifier that provides 30 dB of gain typically. The typical noise figure is 1.8 dB and offers an OP1 dB of 22 dBm typ. The operating voltage is +12 to +15 VDC max and the current draw is 320 mA typ.
PMI Model No. PLN-17-110-15-LCA is a 1.0 to 10.0 GHz, low noise amplifier that typically provides 17 dB of gain. The typical noise figure is 2.0 dB and offers an OP1 dB of 13 dBm min. The operating voltage is +12 to +15 VDC and the current draw is 65 mA max.
PMI Model No. PE210R258R515SFFLM Rev. B is a 0.25 to 8.5 GHz, low noise amplifier with a small signal gain window of +9.0 to +13 dB. The noise figure for this unit is <=4.5 dB max (valid from 0.5 to 8.5 GHz) and offers an OP1 dB of +16 dB min. The operating voltage is +12 VDC and the current draw is 300 mA max.
PMI Model No. PEC-42-1G40G-20-12-292FF is a 1.0 to 40 GHz, ultra-wideband low noise amplifier that provides 42 dB of gain typically with a typical noise figure of 5.5 dB. The OP1dB is typically +22 dBm (1.0 to 18.0 GHz) and +19 dBm (18.0 to 40.0 GHz). The maximum input power rating is +17 dBm CW and the operating DC supply is 550 mA at +12 to +15 VDC.