PMI Model No. P2T-9D25G-80-R-SFF-3W is a single pole, two throw, reflective pin diode switch that operates over a single frequency range of 9.25 +/- 30 MHz. This model has a maximum insertion loss of 34 dBm CW and a minimum isolation specification of 80 dB. It operates at 34 dBm CW max, or +33 dBm, 2 microsecond pulse width (PW) and 8KHz (operating).
PMI Model No. LM-500M8G-2-33DBM-12Vis an active limiter that operates over a frequency range of 0.5 to 8.0 GHz with a maximum input power of +33 dBm CW and a maximum leakage power of +2.3 dBm. The VSWR is 2.0:1 and the operating voltage is +12 VDC with a typical current draw of 180 mA. The unit is supplied with removable SMA(F) connectors in our standard PE2 housing.
PMI Model No. P2T-8G12G-90-T-SFF is a single pole, two throw terminated solid state switch. This model operates over the frequency range of 8.0 to 12.0 GHz and has a typical insertion loss of 2.4 dB, isolation of 75 dB minimum and a typical switching speed of 15 nsec. This unit is capable of operating with RF input power levels up to 20 dBm CW.
PMI Model No. LM-2G18G-2D8-33DBM-12V is an active limiter that operates over a frequency range of 2.0 to 18.0GHz with max input power of +33 dBm CW and a maximum leakage power of +2.8 dBm. The VSWR is 2.0:1 max the operating voltage is +12 VDC with a current draw of 180 mA max.. The unit is supplied with removable SMA(F) connectors in our standard PE2 housing.
PMI Model No. LM-8G18G-7-33DBM-12V is an active limiter that operates over a frequency range of 8.0 to 18.0 GHz with a maximum input power of +33 dBm CW and a maximum leakage power of +7.1 dBm. The VSWR is 2.0:1 and the operating voltage is +12 VDC with a maximum current draw of 100 mA.
PMI Model No. HADA-D2002 is a Detector Log Video Amplifier (DLVA) that operates between the frequency range of 2.0 to 18.0 GHz. It has a dynamic range of 40 dB with a log slope of 50 mV/dB and a nominal video bandwidth of 12 MHz. This unit has been designed with cutting edge technology which provides stunning performance and high reliability in a compact package.
PMI Model No. GMTA-1005 is a threshold detector designed to operate over the frequency range of 8 to 18 GHz. It has a fixed threshold level of -42 dBm with threshold stability of +/-3.0 dBm over frequency and temperature.
PMI Model No. PE2157R52015SFF Rev. D is a 7.5 to 20.25 GHz, low noise amplifier that provides a small gain window of 14.5 to 17.5 with a typical gain flatness of +/-1.5 dB. The noise figure is 6.0 dB max and offers an OP1 dB of 18.0 dBm min. The operating voltage is +15 VDC and the current draw is 300 mA max. This unit is supplied with removable SMA(F) connectors in our standard PE2 housing.
PMI Model DTA-2G18G-60-CD-2-OPT-1G18G is a non-reflective, 10 BIT, programmable 60 dB, pin diode attenuator with step resolution as low as 0.06 dB over the frequency range of 1.0 to 18.0 GHz. This model is offered in a slim line housing measuring only 0.5" H.