We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
PMI Model No. P4T-100M40G-110-T-512-292FF-IND is an absorptive, single pole, four throw pin diode switch that operates over the 0.1 to 40.0GHz frequency range. This model incorporates a TTL compatible driver for easy system integration.
PMI Model No. PE2-22-2G4D2G-3R0-19-12-SFF is a 2.0 to 4.2 GHz, low noise amplifier that has a typical gain of +21.5 dB and maintains a gain flatness of +/-1.0 dB max. It has a maximum noise figure of 3.0 dB and offers an OP1 dB of +19 dBm min. The unit requires +12 to +15 VDC with a nominal current draw of 320 mA.
PMI Model No. PE2-12-2G4D2G-5R0-17-12-SFF is a 2.0 to 4.2 GHz, low noise amplifier that has a typical gain of +12 dB and maintains a gain flatness of +/-1.0 dB max. It has a maximum noise figure of 5.0 dB and offers an OP1 dB of +17 dBm min. The unit requires +12 to +15 VDC with a nominal current draw of 230 mA.
PMI Model Number DD-20-218-5PF-1-N-M-OPT0518 is a 0.5 to 18.0 GHz, high speed, high sensitivity, diode detector requiring no bias and offering excellent temperature stability with a response time of less than 5 nanoseconds. The frequency range is 0.5 to 18 GHz.
PMI Model No. PL-MCU-ENET-TTL-MAH is an ethernet microcontroller test box which allows for an ethernet command to be sent up to 18 parallel TTL output bits. This controller can be used with many PMI products that require parallel digital commands, such as switches, attenuators, phase shifters and IQ modulators.
PMI Model No. PE2-34-2G18G-3R5-15-SFF-VVG-DD is a voltage variable gain amplifier with integrated diode detector operating over the frequency range of 2.0 to 18.0 GHz. This amplifier is supplied in our standard PE2 housing that can be used as SMA connectorized or as a surface mount component. It is optimized for 5.5 to 18.0 GHz.
PMI Model No. P9T-500M40G-60-R-55-292FF-OPT1222 is a high speed, single-pole-nine-throw reflective switch capable of switching within 100 ns. The frequency range is 0.5 to 40 GHz (optimized over 12 to 22 GHz), > 60 dB of isolation.
PMI Model No. PLO-9G-CD-1 is a phase locked oscillator with an output frequency of 9.0 GHz. This model provides minimum output power of +21 dB with all spurs held to -60 dBc and harmonics held to -25 dBc. The unit has a VSWR or <1.5:1 for all phases and is supplied with SMA(F) connectors in a housing that measures 2.25" x 2.25" x 0.63"
PMI Model No. PXO-100M-CD-1 is a 100 MHz, sinewave crystal controlled oscillator with coaxial output connector. This model provides minimum output power of +7 dBm with all spurs held to -60 dBC (10 to 500 MHz) and harmonics and sub-harmonics held to -40 dBc. It requires DC power of +15 V ±5%, 40 mA max, and is in a housing that measures 2.0" x 2.0" x 0.75".
PMI Model No. P4T-100M40G-110-T-512-292FF-IND is an absorptive, single pole, four throw pin diode switch that operates over the 0.1 to 40.0GHz frequency range. This model incorporates a TTL compatible driver for easy system integration.
PMI Model No. PE2-22-2G4D2G-3R0-19-12-SFF is a 2.0 to 4.2 GHz, low noise amplifier that has a typical gain of +21.5 dB and maintains a gain flatness of +/-1.0 dB max. It has a maximum noise figure of 3.0 dB and offers an OP1 dB of +19 dBm min. The unit requires +12 to +15 VDC with a nominal current draw of 320 mA.
PMI Model No. PE2-12-2G4D2G-5R0-17-12-SFF is a 2.0 to 4.2 GHz, low noise amplifier that has a typical gain of +12 dB and maintains a gain flatness of +/-1.0 dB max. It has a maximum noise figure of 5.0 dB and offers an OP1 dB of +17 dBm min. The unit requires +12 to +15 VDC with a nominal current draw of 230 mA. 
PMI Model No. PL-MCU-ENET-TTL-MAH is an ethernet microcontroller test box which allows for an ethernet command to be sent up to 18 parallel TTL output bits. This controller can be used with many PMI products that require parallel digital commands, such as switches, attenuators, phase shifters and IQ modulators.
PMI Model No. PE2-34-2G18G-3R5-15-SFF-VVG-DD is a voltage variable gain amplifier with integrated diode detector operating over the frequency range of 2.0 to 18.0 GHz. This amplifier is supplied in our standard PE2 housing that can be used as SMA connectorized or as a surface mount component. It is optimized for 5.5 to 18.0 GHz. 
PMI Model No. PLO-9G-CD-1 is a phase locked oscillator with an output frequency of 9.0 GHz. This model provides minimum output power of +21 dB with all spurs held to -60 dBc and harmonics held to -25 dBc. The unit has a VSWR or <1.5:1 for all phases and is supplied with SMA(F) connectors in a housing that measures 2.25" x 2.25" x 0.63"