Products

RSS

The AMM-9025CH is a wideband distributed low noise amplifier capable of providing 14 dB gain from 10MHz to 65 GHz and a low 2.8 dB typical noise figure from 7 to 30GHz.

TheThe ADM-9028PSM is a wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz. 

The ADM-9027PSM is a wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz. 

PE423211 is designed for use in high-performance ISM, WLAN 802.11 a/b/g/n/ac/ax, Bluetooth® Low Energy (BLE), and UWB applications up to 10.6 GHz. 

The MSW2-1002HLGA is a 100MHz to 20GHz reflective SPDT switch with average insertion loss of 0.8dB and 44dB isolation. 

Pasternack has announced the launch of a new series of high performance waveguide fixed attenuators designed specifically for mmWave applications.

With silicon beamforming ICs from the Anokiwave acquisition, a rich digital core simplifies flat panel active antenna designs with options for GaN Rx gain or Tx driver stages. 

Quantic PMI Model DTA-0R5G18G-60-CD-4 is a non-reflective, 10 bit, programmable 60 dB pin diode attenuator with step resolution as low as 0.06 dB over the frequency range of 0.5 to 18 GHz.

Quantic PMI Model PEC-54-8G18G-14DBM-SFF is a limiting amplifier with an operating frequency range of 8 to 18 GHz that offers a gain range of +50 to +58 dB with a gain flatness of ±3.5 dB maximum, a noise figure of 7.5 dB.  

Quantic PMI Model PUB-15-30M20G-20-LCA is a 0.03 to 20 GHz Low Noise Amplifier which provides 15 dB of gain while maintaining a gain flatness of ±2.5 dB typically over the operating frequency.