Rosenberger North America LLC Stand C303
Intermodulation Site Analyzer
Rosenberger presents its brand new broadband passive intermodulation site analyzer for multi-function on-site tests and measurements of active and passive elements. The Rosenberger site analyzer features PIM detection over CPRI (including cancellation function), broadband Rx and Tx base model 700 to 2700 MHz with exchangeable filter units, continuous wave signal (no pulse), portability with a rugged design, sunlight readable 12" touch screen, antenna isolation measurement, DTF measurement (VSWR vs. distance; PIM vs. distance), VSWR/return loss measurement and battery, and 110/220 V AC operation.
www.rosenberger.de
Mician Stand C308
µWave WizardTM Version 8.0
Mician shows the latest release of the company’s software tool µWave Wizard™. Version 8.0 comes with a ribbon based graphical user interface. Speed up of GUI launch for very large projects is now up to 10 times faster. It includes a new direct and iterative solver and parallelization is possible. This new release now includes a modeler for user defined elements.
www.mician.com
CST Stand D311
EM Simulation Software
CST STUDIO SUITE®is the culmination of many years of research and development into the most accurate and efficient computational solutions for electromagnetic designs. It offers considerable product to market advantages such as shorter development cycles, virtual prototyping before physical trials and optimization instead of experimentation. CST STUDIO SUITE is comprised of multiple modules for high frequency, low frequency, charged particle and multiphysics applications. Visit CST in Stand D311 to learn more.
www.cst.com
Keysight Technologies Stands 272/E110
Measurement Accelerator
Keysight Technologies’ M9451A PXIe measurement accelerator, a high performance FPGA processing card, speeds envelope tracking and digital predistortion (DPD) characterization for power amplifier test. With the M9451A, closed/open loop DPD and envelope tracking measurements can be made in tens of milliseconds for up to a 100 times speed improvement. The M9451A with Option DPD is now integrated with the RF PA/FEM characterization and test, reference solution, which provides even higher throughput while maintaining highly accurate S-parameter, harmonic distortion, power and demodulation measurements. The reference solution enables full characterization of next-generation power amplifier modules, including power amplifier-duplexers.
www.keysight.com/find/m9451a
High Performance Spectrum Analysis Stands 272/E110
Accelerate spur searches by up to 500 times with new high performance spectrum analysis integrated in PNA and PNA-X vector network analyzers. Keysight recently introduced a new high performance spectrum analyzer capability to its PNA and PNA-X series microwave vector network analyzers (VNA). This new capability: improves test times by a factor of 10 to 500 times with fast spur searches over a wide frequency range up to 67 GHz, provides unparalleled insight by measuring spurious signals simultaneously from all ports on mixers and frequency converters, unlocks true device performance by removing cable and fixture effects with using VNA calibration and de-embedding techniques, and simplifies test stations with the PNA-X’s expanded single-connection, multiple-measurement capability.
www.keysight.com/find/pna-sa
12-bit PCIe High Speed Digitizer Stands 272/E110
The U5303A is a 12-bit PCIe digitizer, sampling up to 3.2 GS/s, with on-board real-time processing. It delivers unprecedented analog fidelity, high ENOB and very low noise. New dedicated options are available: CSR continuous simultaneous acquisition and readout allows engineers to perform acquisition and readout simultaneously and continuously. CB0 digitizer streaming implements real-time digitizer data recorder. CB1 digital down-converter streaming provides the same functionality as CB0 and adds real-time digital down-converter functionality. Recording performances up to 180 MHz instantaneous bandwidth are ensured in a specific qualified system.
www.keysight.com/find/digitizers
Maury Microwave Stand E111F
Product Showcase
Exceptional companies have superior labs – complete your lab with Maury Microwave.Maury, a leader in measurement and modeling device characterization solutions, VNA calibration accessories and interconnections, will be showcasing active and hybrid-active harmonic load-pull solutions, LXTM-certified mechanical impedance tuners, pulsed IV/RF compact transistor modeling as well as coaxial and waveguide VNA calibration kits and metrology adapters, in-stock color-coded precision and daily-use adapters, and test-port, phase-stable and value cable assemblies. Visit Maury for details, demos, deals and NPIs.
www.maurymw.com
NI AWR Stand E112
Design Environment Software
Visit NI at Stand E112 to explore the new features in V12 NI AWR Design Environment software. Demonstrations include new amplifier, radar and antenna specific features as well as ease of use, performance improvements and third-party flows such as ANSYS HFSS.
www.awrcorp.com/v12
National Instruments Stand E112
FPGA Programmable Solutions
National Instruments, provider of RF and commercial wireless test equipment, will be featuring new LabVIEW FPGA programmable solutions for spectrum monitoring and electronic warfare applications. These solutions include a real-time spectrum analysis demonstration using NI’s new controller for FlexRIO. The NI Controller for FlexRIO combines with wideband RF transceiver adaptor modules to produce a rugged and deployable radio platform. The new FlexRIO solution complements NI’s PXI high-performance signal analyzers such as the PXIe-5668R – the industry’s widest bandwidth 26.5 GHz real-time spectrum analyzer.
www.ni.com
NI Microwave Components Stand E112
Synthesizers
QuickSyn synthesizers are now extended to mmWave. NI Microwave Component’s new QuickSyn mmWave synthesizer modules use the same QuickSyn technology that allows fast switching, low phase noise and compact size. These CW sources cover popular frequency bands, 27 to 40 GHz, 50 to 67 GHz and 76 to 82 GHz for a variety of applications including a backhaul for digital radio, point-to-point and point-to-multipoint wireless HDMI, WiGig, IEEE802.11ad, wireless gigabit Ethernet and automotive radar for collision avoidance.
www.ni.com
SPINNER GmbH Stand 274
Going the Extra Mile
At European Microwave Week, SPINNER will present a selection of superior rotary joints for satellite communications as well as test and measurement products for calibration and PIM. SPINNER will also be launching its low PIM switch and rotary joint, which will help to save further costs in automated RF test and measurement environments. SPINNER is a global leader in developing and manufacturing state-of-the-art RF components. Since 1946, the industry’s leading companies have trusted SPINNER to provide them with innovative products and outstanding customized solutions.
www.spinner-group.com
Rohde & Schwarz GmbH & Co. KG Stand E113
Vector Signal Generator
With its new microwave frequency options, the R&S SMW200A vector signal generator supports development applications requiring complex multichannel scenarios up to 40 GHz. It is the only instrument on the market to combine a baseband generator and RF generator with fading, AWGN and MIMO capabilities in a single box. Offering an RF modulation bandwidth of 160 MHz with excellent I/Q flatness and EVM, the R&S SMW200A generates signals of the highest modulation quality in the microwave range.
www.rohde-schwarz.com
USB and LAN Diode Sensors Stand E113
The completely redesigned R&S NRPxxS and R&S NRPxxSN USB three-path diode power sensors offer unprecedented measurement speed and accuracy, even at low levels. The sensors enable 10,000 triggered measurements per second with a minimum trigger resolution of 100 µs. A special mode permits 50,000 equidistant measurements per second. The improved design decreased the lower measurement limit to -70 dBm, resulting in a very wide dynamic range of 93 dB.
www.rohde-schwarz.com
Anritsu Stand E305
5G Wideband Modulated S-Parameter VNA Measurements
VectorStar VNA paired with Chalmers University software to demonstrate power amplifier measurements under modulated conditions. Instantaneous receiver bandwidth of up to 200 MHz utilizing the NLTL sampler and high speed IF digitizer option to evaluate device and amplifier characteristics under 5G conditions. The interface provides a display of ACPR, adjacent channel intermodulation and AM/AM characteristics. Performing these measurements up to 70 GHz provides the first-ever capability to analyze device and component performance under real world conditions including future 5G networks.
www.anritsu.com
Dow-Key Microwave Stand 116
High Power & Lightweight T-Switch
Dow-Key Microwave presents its high power T-switch 511H-series, which has been qualified and supplied to various domestic and international space programs, for both military and commercial use. Today’s design is offered with 1.5 kW peak power at UHF-Band, 300 W peak power both at L-Band and S-Band, and 200 W peak power at C-Band. In addition to its superior RF performance and lightweight design, the 511H-series minimizes the switching time by using random access drive and it is available in various mounting configurations.
www.dowkey.com
K&L Microwave Stand 116
Lowpass Filters
Using a proprietary approach for power handling,K&L has developed a series of cleanup lowpass filters for high power applications. High power amplifiers often create spurious responses that are undesirable, K&L’s lowpass filters enable a spurious free response as much as ten times the fundamental frequency. With power handling currently up to 2500 W and frequency coverage from 0.5 to 100 MHz, these lowpass filters enable spurious free HPA performance. To discuss your application visit K&L at Stand 116.
www.klmicrowave.com
Pole/Zero Stand 116
Tunable Bandpass Filter
Pole/Zero’s new NANO-ERFTMtunable bandpass filter covers the military tactical radio band of 30 to 520 MHz while fitting in a package measuring 1.1" × 1.1" × 0.216" (28 × 28 × 5.5 mm). The NANO-ERF combines SMT capability with +6 dBm in-band and +20 dBm out-of-band RF power handling, +16 dBm IIP3, low insertion loss (5 dB typical in a 6% filter), 27 µs typical tune time and selectivity of 20 dBc at fc ± 15 percent for 6 percent bandwidth.
www.polezero.com
Spectrum Elektrotechnik GmbH Stand 128
Phase Shifters
Phase shifters or phase adjusters of Spectrum Elektrotechnik GmbH are passive devices, being used to change the phase of an RF signal. Key parameters include consistent amplitude across all phase states and low insertion loss. The units are used in phased array antennas, phase modulators, frequency converters, testing and instrumentation. Frequency ranges start always at DC, with operation to 2,12, 18, 26, 40, 50 and 63 GHz. New are the mini phase adjusters.
www.spectrum-et.com
Southwest Microwave Stand 141
SuperMini Board-to-Board DC to 67 GHz Connectors
SuperMini board-to-board DC to 67 GHz blind-mate connectors optimize transmission line reliability for board-to-board applications, assuring interconnect performance for PCBs stacked as tightly as 3 mm. Unique bullet and receptacle designs accommodate 0.010" axial and ± 5° radial misalignment. Low mating insertion force allows an increased density of interconnections per board. Superior bullet design enables extended mating and de-mating cycles. Available vertical and end launch configurations for microstrip and grounded co-planar launch transitions, plus direct solder cable assemblies to simplify high performance push-on test connection to board-to-board receptacles.
www.southwestmicrowave.com
Greenray Industries Inc. Stand 143
Temperature Compensated Oscillator
Greenray Industries Inc. announced the availability of the T1220 TCXO. The new, high performance T1220 temperature compensated oscillator, available from 10 to 50 MHz with squarewave, CMOS output, features ultra tight frequency stability vs. temperature performance. The T1220 offers a low g-sensitivity option (down to < 7 × 10-10/g) while maintaining superior frequency stability. The T1220’s tight stability makes it an ideal choice for mobile radio applications where OCXO performance is required but at low power consumption.
www.greenrayindustries.com
Ducommun Inc. Stand 144
60 to 90 GHz Block Down-Converter
Model SNG-12-01 is a full E-Band block down-converter. Its primary function is to extend the testing capability of low cost, low frequency noise figure meters. It also allows noise figure testing of E-Band devices without a noise figure meter, using the Y-factor method. The block down-converter is also versatile for use with various other applications. With a low cost design, Model SNG-12-01 is an affordable expansion to millimeter-wave labs that do not have the budget for large scale equipment.
www.ducommun.com
Holzworth Instrumentation Stand 144
Signal Generators
Holzworth Instrumentation’s HSX Series signal generators exhibit industry leading phase noise and spectral purity performance coupled with an accurately calibrated dynamic range of +23 to -110 dBm. 1, 2, 3 or 4 channel models are available in a 1U form factor; each providing the ultimate in frequency accuracy, channel-to-channel stability and phase coherency. The 10 MHz to 6 GHz CW source product is currently available with 12 and 20 GHz models available as beta evaluation units. Experience a demo at EuMW Stand 144.
www.holzworth.com
RFMW Stand 146
Circulator
The RFCI RFCR8934 is a wideband, drop-in circulator spanning 8 to 18 GHz with 250 W peak/25 W average forward power handling. Part of the RF Circulator Isolator Inc.’s (RFCI) family of broadband, octave and octave plus drop-in circulators, the RFCR8934 provides >16 dB typical port-to-port isolation while maximum insertion loss is 0.7 dB. Octave and octave plus circulators are a robust, drop-in alternative to broadband coaxial designs used to protect active components from distortion or potentially damaging reflected power.
www.rfmw.com
API Inmet Stand 152
Higher Shift Temperature Variable Attenuators
API Inmet expanded the temperature variable attenuator offering by introducing the -.009 dB/dB/°C series for applications up to 12 GHz and 2 W incident power. This addition to the Powerfilm™ brand of resistive components eliminates the need for gain control circuitry and bias or control voltages. The initial release consists of values 2 thru 5 dB. More information and data sheets can be found at www.inmet.apitech.com. Sample requests can be made at inmetsales@apitech.com or call (734) 426-5553.
www.inmet.apitech.com
API Technologies Corp. Stand 152
Hybrid Driver Amplifier
The QB-904 is a 4 W hybrid driver amplifier operating over the 2 to 6 GHz frequency range utilizing the latest in GaN die technology. It features a wide DC input voltage range, 38 dB of small signal gain and a saturated output power of +36 dBm, minimum. The QB-904 is packaged in a small, hermetically sealed copper nickel housing with an optional heat sink.
www.apitech.com
API Weinschel Stand 152
Programmable Attenuator Units
Weinschel, an API Technologies company, announced a new series of programmable attenuator units that offer a new streamlined approach in programmable attenuation for bench test and subsystem applications. Models 8320/8321, house and control various Weinschel programmable attenuator models (3200-XE, 3400, 150T and 4200 Series) via front panel controls, Ethernet, USB 2.0 and serial communications interfaces. A GPIB (IEEE-488) interface is also available as an option. This series is available in single or up 12 channel configurations and can be configured for front or rear connectors.
www.weinschel.apitech.com
AR RF/Microwave Instrumentation Stand 154
Amplifier
Model 100S1G6AB is a solid-state; 100 W Class AB amplifier design that instantaneously covers 1 to 6 GHz in one unit. The 100S1G6AB will provide Pout of 100 W minimum at Psat with infinite mismatch tolerance housed in approximately half the size of a traditional Class A design at a much more economical price.
www.arworld.us
HUBER+SUHNER Stand 198
RF-over-Fiber Series
The market is evolving at a significant pace. With customers requiring that new solutions and systems combine various technologies, HUBER+SUHNER has positioned itself to be able to provide its customers with end-to-end solutions. Key benefits of combining radio frequency and fiber optics in a single solution: no changes required to existing RF infrastructure, secure, lightweight, covers greater distances with less loss, wide frequency ranges available, flexible connectivity options, reduced total cost of ownership and future-proof.
www.hubersuhner.com
Ingun Prufmittelbau GmbH Stand 198
RF Probe up to 12 GHz
The German test equipment manufacturer INGUN has developed a new radio frequency probe HFS-856 for contacting switch-connector (MM8030, MM8430, MS-156 and MS-180) and also miniature plug connectors (U.FL). During the contacting process the outer conductor is contacted first, whereupon it then aligns optimally on the connector due to its floating mounting and ultimately makes contact to the signal conductor. Using the new design, frequencies up to 12 GHz can be transferred. The assembly is carried out by means of a flange with a centering bolt and two screws. The HFS-856 is connected via a SMA plug.
www.ingun.com
RFHIC Stand 205
GaN SMD Module
RFHIC’s GaN SMD Module, HI2425-15A is specially designed for wireless power transfer (WPT), plasma lighting system (PLS), thermal therapy applications. And more high power and beam switching system can be accomplished by employing array antenna. Using an advanced high power density GaN semiconductor process, this high performance amplifier achieves efficiency of 80 percent and powers 5 to 15 W at 2.45 GHz of ISM band. HI2425-15A is 50 ohm input/output matched in a very small form-factor 15 × 10 × 5.4 mm on aluminum nitride (AlN) board that provides excellent thermal dissipation.
www.rfhic.com
Coilcraft Stand 217
High Q Air Core Inductors
Coilcraft tight tolerance surface-mount “spring” inductors combine the exceptionally high Q of an air-wound coil with the convenience of surface-mounting. Their flat tops make them suitable for automatic placement and reflow or vapor-phase processing. The SQ Family of square air core inductors is offered in seven sizes with Q factors up to 230 and current ratings as high as 5.7 amps. Visit Stand 217 to learn more. Also be sure to ask about their ultra-broadband conical inductors.
www.coilcraft.com/prod_smspring.cfm
Isola Group Stand 219
Laminates
Astra MT laminates and prepreg are breakthrough, ultralow-loss dielectric materials for patch antenna designs and RF front-end PCBs for 76 to 81 GHz radar applications. Astra MT materials enable a higher yield in RF-hybrid PCB manufacturing, reducing production costs. Astra MT features a Dk that is stable between -55° and +125°C at up to 20 GHz. In addition, Astra MT offers a lower dissipation factor (Df) of 0.0017, making it a cost-effective alternative to PTFE and other commercial microwave laminate materials.
www.isola-group.com
Norden Millimeter Stand 230
Block Frequency Converters
Norden Millimeter produces a variety of block frequency converters converting 18 to 26.5, 26.5 to 40, 40 to 60, and 60 to 70 GHz bands into the 2 to 18 GHz band. These converters are usable to extend the frequency range of existing systems with 18 GHz capability. Norden makes both down and up converter versions for each of these bands. These converters can have variable gain, 0.03 to 18 GHz bypass paths, and common IF input/output. Shown is an 18 to 40 GHz down-converter presently in production with 14.4 GHz LO frequency and 0.5 to 18 GHz converter bypass.
www.nordengroup.com
OML Inc. Stand 230
Down-Converter
OML introduced its first down-converter (CxxLNDC) that directly interfaces with a spectrum analyzer without the need of an external LO source. With a typical conversion loss of 12 dB, excluding IF amplifier gain, and a compression of 0 dBm typical, this down converter covers both V-Band (50 to 75 GHz) and E-Band (60 to 90 GHz). These two models can help to provide solutions in IEEE 80211.ad (Y-Gig), point-to-point radios and automotive radar.
www.omlinc.com
Freescale Semiconductor Stand 231
RF Power Integrated Circuit
Size, weight and power are critical parameters for avionics applications. Freescale’s AFIC10275N is the industry’s first RF power integrated circuit covering the 978 to 1090 MHz band, and helps customers address these market criteria by enabling much smaller and lighter power amplifier (PA) transponders. The AFIC10275N integrates two amplification stages in a plastic package, delivering 250 W with 31 dB of gain and 64 percent drain efficiency. The device also embeds temperature and RF sensing capabilities, reducing the need for external components.
www.freescale.com
Exodus Advanced Communications Stand 233
Solid-State Power Amplifier
Exodus Advanced Communications announced the release of a new high power ultra broadband solid-state power amplifier: AMP1062 operates over 6 to 18 GHz instantaneous bandwidth with 40 W minimum in CW and 30 W P1dB typical output power using state of the art Class AB GaN devices. Featuring 46 dB of gain and 32 V DC supply voltage at 14 amp maximum current consumption, this amplifier is suitable for use in multiple platforms including communication, jamming, radar transmitter systems and TWTA replacement.
www.exoduscomm.com
MPI Corp. Stand 237
Probe System for mmWave Application
MPI TS150–THZ is a dedicated manual probe system designed especially for precise measurements on substrates and/or on 150 mm wafers in sub-THz range. The system is extremely stable and based on the unique MPI air-bearing stage concept with 1 µm fine XY positioning, with a large probe platen, standard 4-port support, unique platen lift with 1 µm contact repeatability and integration of state-of-the-art frequency extenders for easy re-setting of different banded mmWave solutions.
www.mpi-corporation.com
JFW Stand 240
Configurable Power Dividers for Lab Use
JFW introduced its latest innovation in RF test equipment. The 50PDA-150-XX is a completely new approach to laboratory power divider assemblies. Its modular design can be specified at the time of order to include any number of combiner configurations. Each interchangeable module may include four 2-ways, three 3-ways, two 4-ways, or one 8-way (each assembly holds up to six modules).
www.jfwindustries.com
Eclipse Microwave Inc. Stand 257
PIN Diodes
The Eclipse EGP7000 series of PIN diodes are processed with a high resistivity epi that have intrinsic layers that range in thickness from 4 to 200 micron depending on performance specifications. These diodes are made with a grown junction P++ layer that yields abrupt junction structures that provide low punch through voltages and minimize autodoping. They are available as chips or in your choice of 19 packages.
www.eclipsemdi.com
Teledyne Relays Stand 260
RF Relay
Teledyne Relays announced its new 121 relay. The RF121 is a high repeatability, SPDT, broadband, magnetic-latching RF relay with performance to 12 GHz. The RF121 is ideal for switchable RF attenuators, RF switch matrices, high frequency spectrum radios, ATE and applications that require dependable high frequency signal fidelity and performance. The RF121 is available in through-hole, surface-mount stub pin (GRF121) and J-lead configurations. The GRF121 has a frequency range of DC to 16 GHz.
www.teledynerelays.com