Model SBP-2634034530-2828-X1 is a full Ka band power amplifier with a typical small signal gain of 45 dB and a typical P1dB of +30 dBm in the frequency range of 26.5 to 40 GHz. The typical DC power requirements for the amplifier are +6 VDC/2,500 mA and -5.0 VDC/110 mA, respectively. The input and output port configurations are both WR-28 waveguide with UG599/U flange.
Model STO-12-S1 is an E Band vector network analyzer (VNA) frequency extender designed to achieve full 2-port, S-parameter testing at 60 to 90 GHz. It is compatible with modern vector network analyzers such as the Rohde & Schwarz ZVA Series and the Keysight PNA-X Series. The frequency extenders can achieve a dynamic range of 90 dB and are great for testing many E band devices including passive and active devices.
Model SST-2730253027-28-S1 is a Ka Band compact transmitter module operating at 26.8 GHz. This product is designed and manufactured for small satellite applications. The module incorporates a phase locked oscillator to convert 1.0 signal to 26.8 GHz signal. With an integrated 23 dBi circular polarized lens corrected antenna, the module delivers +50 dBm EIRP. The module measures 3.78”(W) x 3.44”(L) x 4.43” (H) and weighs 24 Oz.
Model SSK-ST573673-15-ITS1 is a V-Band transmitter (upconverter) that emits two orthogonally polarized signals from 57-67 GHz. The transmitter takes 14.250 to 15.875 GHz/+0 dBm signal through a X4 active multiplier to generate millimeterwave signal as its local oscillator and DC to 3.5 GHz/0 dBm as its IF input signal to generate 57 to 67 GHz RF signals.
Model SSC-7737731200-1212-C1 is an E-Band transceiver. The transceiver has a minimum transmit output power of -30 dBm in the frequency range of 76 to 78 GHz with an IF input power of 0 dBm in the frequency range of 550 to 950 MHz. The typical receive conversion loss is -12 dB with a typical RF input power of -20 dBm in the frequency range of 76 to 78 GHz and a IF output frequency range of 550 to 950 MHz.
Model SBL-5037533060-1212-E1 is a low noise amplifier covering the full waveguide band from 50 to 75 GHz with small signal gain of 30 dB and 6.0 dB noise figure. The amplifier also exhibits +10 dBm typical P-1 dB output powers. It draws about 120 mA current from a single DC power supply in the range of +8 to +12 volts.
Model SWP-46347304-2F2F-C1 is a Q band high Q four-way power combiner operating from 45.5 to 47 GHz. The power combiner exhibits better than 15 dB return loss, 2.0 dB insertion loss and 20 dB port to port isolations in the operational bandwidth. The power combiner possesses excellent phase and amplitude balanceand is equipped with 2.4 mm (female) connectors.
Model SKD-9031045030-1010-R1 is a W-Band single-pole double-throw (SPDT) switch that operates from 90 to 100 GHz. It has better than 30 dB isolation and 5 dB typical insertion loss over the entire frequency range. The power handling and input P-1 dB of the switch is +23 dBm CW. This model has a built-in TTL driver which provides 2 us switching speed. The required bias for the switch is +/- 5 Vdc/10 mA.
Model SBB-0132732526-KFKF-SB is a bench-top broadband power amplifier operating from 1.0 to 26.5 GHz. The amplifier provides 25 dB small signal gain and a minimum +25 dBm output power over the entire frequency range. The bench top amplifier is designed to use 100 to 240 V AC power directly from power line for laboratory use. The bench top amplifier is equipped with K connectors for RF path and measures 3.75” (W) x 4.15” (L) and 1.75” (H).