PMI Model No. P4T-50M40G-55-T-292FF is a 50 MHz to 40.0 GHz, single pole, four throw, absorptive switch. This switch offers 55 dB of port to port isolation and a maximum insertion loss of 8 db. It has a switching speed of 100 ns and is independently TTL controlled. The operating power is +20 dBm CW and it has a VSWR of 2.5:1 max.
PMI Model No. P2T-8G12G-100-T-55-SFF is a single pole, two throw, high power, absorptive switch. This switch has high isolation of 100 dB min and low insertion loss of 3.0 dB typical (5.0 dB max). It offers a high switching speed of 100 ns max and has an integral TTL driver.
PMI Model No. P2T-8G18G-45-R-SFF-HP20W is an SP2T, high power (20 W), reflective switch. This switch operates on a frequency of 8.0 to 18.0 GHz. It has a low insertion loss of 2.5 dB max and an integral TTL driver and is hermetically sealed.
PMI Model No. P2T-960M977M-30-R-528-SFF-20W is a single pole, two throw, reflective switch capable of handling input power up to 20 W CW. The frequency range is 960 to 977 MHz and it has over 40 dB of typical isolation with a switching speed of less than 40 nsec. The unit is supplied with SMA Female connectors in a package measuring 1.2" x 1.0" x 0.5".
PMI Model No. BPF3D875-2D25-CD-SFF is a Bandpass filter that has a center frequency of 3.875GHz and a Passband of 2.25GHz. The passband insertion loss is 2.0dB max with a VSWR of 2.0:1 max. The filter measures 2.50" x 0.8" x 0.5" and is supplied with SMA Female connectors.
PMI Model DTA-22G28G-50-CD-1 is a 50 dB monotonic programmable attenuator with 11-bit resolution that provides a step size of 0.025 dB. It has also been designed to have very low insertion loss over the frequency range of 22.5 to 27.5 GHz.
PMI Model No. P1T-500M40G-55-T-292FF is an SPST, high speed, absorptive switch. This switch operates at a frequency range of .5 to 40.0 GHz and is capable of switching within 100 ns. It has 55 dB of isolation and insertion loss of 5.5 dB max.
PMI Model No. LM-10G-3-26DBM-12V is an active limiter that operates at 10 GHz and provides an input dynamic range of -45 to +26 dBm. This limiter offers very hard limiting at 0 dBm typically and 3 dBm maximum. The VSWR on average is better than 1.4:1 and operating voltage is +12 to +15 VDC with a current draw of 10 0mA.
PMI Model No. PEC-42-500M40G-20-12-292MM is a 500 MHz to 40 GHz ultra-wideband low noise amplifier that provides typically 42 dB of gain with a noise figure of 5.5 dB at 2 0GHz. The OP1 dB is typically +22 dBm (1.0 to 18.0 GHz) and +1 9dBm (18.0 to 40.0 GHz).