We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
American Microwave Corporation offers Model Number BT-50K18 with Options PS, and RES which is a Resistive Bias Tee Designed for 50kHz to 18 GHz Frequency Range. The VSWR is 1.75:1 Typical, and the Insertion Loss is 0.75 Typical while the Isolation is 60 dB Minimum.
The model MSN-10DT-05-DEC-M options NE, 100M18, 3SS, 45004, is an SP10T absorptive switch that operates from 100 MHz to 18 GHz. Insertion loss is ≤ 2.25 dB at 100 MHz and ≤ 4.15 dB at 18 GHz. Isolation is ≥ 95 dB at 100 MHz and ≥ 60 dB at 18 GHz.
SWITCHED BIT ATTENUATOR ARRAY Planar Monolithics Industries Model No: SAA-218-6-093-013542 is an Array of Six Switched Bit Attenuators (AMC Model No: SBA-218-6) operating from 2 to 18 GHz. This Assembly provides Switchable RF Attenuation for Six Signal Paths.
AMC Model No: SWM-DJV-1DT-2ATT is an Ultra-High Speed Pulse Modulator with ≤2nS Rise and Fall times with a ≤20nS Min. Pulse Width @ 50% Duty Cycle. The Modulator operates from 0.5 to 20.0 GHz and can handle RF Input Power up to +20 dBm with only ±10mV Max. Video Transient.
A line of Detector Log Video Amplifiers, in both 40/45dB and 70dB models with a variety of available packages and capabilities. The Model No: LVD-218-50 is a 40/45dB, miniature, 2.0 to 18.0 GHz (other Frequency Bands Available), DC-Coupled, Detector Log Video Amplifier. The VSWR is 3.0:1, the RF operating input power is +13 dBm. The rise time is 20 nS and the recovery time is 200 nS Max.
American Microwave Corporation is pleased to offer our model number: MVVAN-30M3-40-SP with Options HPR2W, and FK which is a Miniature Voltage Controlled Attenuator.
This model Operates from 30.0 MHz to 2.8 GHz with a Very Low Insertion Loss of only 1.5 dB. The VSWR is 2.0:1 and an IP3 of 15 dB.
The model MSN-2DT-05-IND with option 561R310H01 is an absorptive, SPDT PIN diode switch that operates from 50 to 500 MHz. This hermetically sealed switch offers a typical insertion loss of less than 1 dB, a typical isolation of 65 dB and a typical VSWR of 1.25.
The model SWN-218-2DT option NS is a single-pole, two-throw, terminated switch module that offers an insertion loss of 1.2 dB typical, high isolation of 80 dB minimum and an integral TTL driver.
The model SWM-6000-1DTU option 011 is an absorptive/non-reflective SPST switch that operates from 10 MHz to 6 GHz (other frequencies are available). Insertion loss is less than or equal to 1.25 dB at 10 MHz and less than or equal to 3.5 dB at 6 GHz.
American Microwave Corporation offers Model Number BT-50K18 with Options PS, and RES which is a Resistive Bias Tee Designed for 50kHz to 18 GHz Frequency Range. The VSWR is 1.75:1 Typical, and the Insertion Loss is 0.75 Typical while the Isolation is 60 dB Minimum.
The model MSN-10DT-05-DEC-M options NE, 100M18, 3SS, 45004, is an SP10T absorptive switch that operates from 100 MHz to 18 GHz. Insertion loss is ≤ 2.25 dB at 100 MHz and ≤ 4.15 dB at 18 GHz. Isolation is ≥ 95 dB at 100 MHz and ≥ 60 dB at 18 GHz.
SWITCHED BIT ATTENUATOR ARRAY Planar Monolithics Industries Model No: SAA-218-6-093-013542 is an Array of Six Switched Bit Attenuators (AMC Model No: SBA-218-6) operating from 2 to 18 GHz. This Assembly provides Switchable RF Attenuation for Six Signal Paths.
AMC Model No: SWM-DJV-1DT-2ATT is an Ultra-High Speed Pulse Modulator with ≤2nS Rise and Fall times with a ≤20nS Min. Pulse Width @ 50% Duty Cycle. The Modulator operates from 0.5 to 20.0 GHz and can handle RF Input Power up to +20 dBm with only ±10mV Max. Video Transient.
A line of Detector Log Video Amplifiers, in both 40/45dB and 70dB models with a variety of available packages and capabilities. The Model No: LVD-218-50 is a 40/45dB, miniature, 2.0 to 18.0 GHz (other Frequency Bands Available), DC-Coupled, Detector Log Video Amplifier. The VSWR is 3.0:1, the RF operating input power is +13 dBm. The rise time is 20 nS and the recovery time is 200 nS Max.
American Microwave Corporation is pleased to offer our model number: MVVAN-30M3-40-SP with Options HPR2W, and FK which is a Miniature Voltage Controlled Attenuator.
The model MSN-2DT-05-IND with option 561R310H01 is an absorptive, SPDT PIN diode switch that operates from 50 to 500 MHz. This hermetically sealed switch offers a typical insertion loss of less than 1 dB, a typical isolation of 65 dB and a typical VSWR of 1.25.
The model SWN-218-2DT option NS is a single-pole, two-throw, terminated switch module that offers an insertion loss of 1.2 dB typical, high isolation of 80 dB minimum and an integral TTL driver.
The model SWM-6000-1DTU option 011 is an absorptive/non-reflective SPST switch that operates from 10 MHz to 6 GHz (other frequencies are available). Insertion loss is less than or equal to 1.25 dB at 10 MHz and less than or equal to 3.5 dB at 6 GHz.
The model SWN-RAYR-2DR is a single-pole, two-throw, reflective switch module with options HPE2W, HS30NS and LVT25MV.