We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
The Model 10ST1G18A is a self contained, forced air cooled, broadband hybrid solid state and traveling wave tube (TWT) microwave amplifier designed for applications where low harmonic content is required in sub-band ranges and where high gain and moderate power output are required. A reliable amplifier system that provides a conservative 10 Wminimum at the amplifier output connector with low harmonics.
AR’s versatile RF test system controllers (signal routing switch matrices) coordinate multiple pieces of equipment in a single test setup alleviating the need for changing cable feeds due to frequency limitations of individual pieces. The SC1000’s can be used as RF switch matrices and can be controlled by SW888A and SW10006 software.
AR offers several families of solid state microwave amplifiers: 0.8 to 4.2GHz (1 to 700 W); 0.8 to 3 GHz (15 to 800 W); 4 to 10.6 GHz (1 to 150 W); 4 to 8 GHz (15 to 120 W) and 8 to 20 GHz ( 5 to 20 W). Our S series amps generate 100% of rated power and make it available to the load even when mismatch is severe. 100% of the power is available and delivered to the output device 100% of the time.
The AR CI systems are self-contained conducted immunity test systems that provide outstanding ease of use and flexibility. Because each system is contained in a single rack, setup issues are eliminated. The use of spectrum analyzers and monitoring equipment may also be controlled by the Lab-View based software that controls the system.
AR RF/Microwave Instrumentation’s model FL7018 (3 MHz – 18 GHz / 1 – 1000 V/m) is the newest addition to the company’s Starprobe® family of advanced laser-powered e-field probes. The probe’s noise reduction and temperature compensation capabilities allow accurate measurement down to 1 V/m. When rotated about its magic angle mount, it provides isotropic response of +/-1.5 dB to 8 GHz.
AR RF/Microwave Instrumentation has the distinction of having the only commercially available pulsed E-field probe that is approved by name in the new FORD-EMC-CS-2009 specification. The new specification, which addresses the pulse E-field probe method calibration for ALSE method bands 6 and 7, singles out AR Model PL7004 (800...
AR RF/Microwave Instrumentation has introduced three new antenna mounting adaptors that are uniquely designed to allow horizontal and vertical polarization changes during testing without removing the antenna from the tripod. The three new adaptors are designed to be compatible with existing AR antenna models. •Adaptor Model AM1000 is designed...
AR ’s model 20S6G18, a 20 W solid state amplifier covering 6 to 18 GHz, provides high gain, low noise, good linearity and excellent mismatch capability. The amplifier also delivers superior EVM (error vector magnitude) performance. With a minimum of 43 dB gain and a typical noise figure of...
The Model 10ST1G18A is a self contained, forced air cooled, broadband hybrid solid state and traveling wave tube (TWT) microwave amplifier designed for applications where low harmonic content is required in sub-band ranges and where high gain and moderate power output are required. A reliable amplifier system that provides a conservative 10 Wminimum at the amplifier output connector with low harmonics.
AR’s versatile RF test system controllers (signal routing switch matrices) coordinate multiple pieces of equipment in a single test setup alleviating the need for changing cable feeds due to frequency limitations of individual pieces. The SC1000’s can be used as RF switch matrices and can be controlled by SW888A and SW10006 software.
AR offers several families of solid state microwave amplifiers: 0.8 to 4.2GHz (1 to 700 W); 0.8 to 3 GHz (15 to 800 W); 4 to 10.6 GHz (1 to 150 W); 4 to 8 GHz (15 to 120 W) and 8 to 20 GHz ( 5 to 20 W). Our S series amps generate 100% of rated power and make it available to the load even when mismatch is severe. 100% of the power is available and delivered to the output device 100% of the time.
The AR CI systems are self-contained conducted immunity test systems that provide outstanding ease of use and flexibility. Because each system is contained in a single rack, setup issues are eliminated. The use of spectrum analyzers and monitoring equipment may also be controlled by the Lab-View based software that controls the system.
AR RF/Microwave Instrumentation’s model FL7018 (3 MHz – 18 GHz / 1 – 1000 V/m) is the newest addition to the company’s Starprobe® family of advanced laser-powered e-field probes. The probe’s noise reduction and temperature compensation capabilities allow accurate measurement down to 1 V/m. When rotated about its magic angle mount, it provides isotropic response of +/-1.5 dB to 8 GHz.