We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
The Durel Division of Rogers Corporation has announced an addition to its high-performance electroluminescent (EL) lamp driver integrated circuits (ICs) - D392A. The D392A EL lamp driver delivers the programmable output voltages needed to power a wide range of EL lamps, including in portable applications such as cellular telephones, data organizers and PDAs, remote controls, monochrome LCDs, and DFLX™ EL keypad lamps.
The HMC-C062 is a fanout buffer designed to support data transmission rates of up to 50 Gbps. The device can also operate with clock signals up to 30 GHz. The input is broadband from DC to 30 GHz. During normal operation, input data (or clock) is transferred to both output channels. Differential input signals to the HMC-C062 are terminated with 50 Ohms to ground on-chip, and may be either AC or DC coupled.
Mini-Circuits PHA-1+ Ultra High Dynamic Range MMIC Amplifier supports low intermodulation amplification over the broad frequency range of 50 MHz to 6 GHz. This design provides a unique combination of high Output IP3 (typically +42 dBm) while maintaining a noise figure less than 3 dB up to 4 GHz and typical gain of 14 dB at 2 GHz.
Whether in ATE, Servers, Backplanes, Telecom Switches or many more, the HDSI® cable is the lowest cost answer for your high-speed digital or analog signal transmissions.
Hittite Microwave Corp., the world class supplier of complete MMIC based solutions for communication & military markets, has introduced two new wideband direct I/Q modulators which are ideal for automotive, broadband, cellular/3G, WiMAX/4G, military and test & measurement equipment applications between 20 and 4000 MHz.
The N2784A and N2785A one- and two-arm probe positioners provide quick and stable X-Y positioning using a simple “lift and drop” motion to set the probe in place. The N2784A probe positioner provides quick and stable X-Y positioning with only a “lift and drop” motion to put the probe in place for PC boards and devices that require hands-free probing.
RSS
The Durel Division of Rogers Corporation has announced an addition to its high-performance electroluminescent (EL) lamp driver integrated circuits (ICs) - D392A. The D392A EL lamp driver delivers the programmable output voltages needed to power a wide range of EL lamps, including in portable applications such as cellular telephones, data organizers and PDAs, remote controls, monochrome LCDs, and DFLX™ EL keypad lamps.
The HMC-C062 is a fanout buffer designed to support data transmission rates of up to 50 Gbps. The device can also operate with clock signals up to 30 GHz. The input is broadband from DC to 30 GHz. During normal operation, input data (or clock) is transferred to both output channels. Differential input signals to the HMC-C062 are terminated with 50 Ohms to ground on-chip, and may be either AC or DC coupled.
Mini-Circuits PHA-1+ Ultra High Dynamic Range MMIC Amplifier supports low intermodulation amplification over the broad frequency range of 50 MHz to 6 GHz. This design provides a unique combination of high Output IP3 (typically +42 dBm) while maintaining a noise figure less than 3 dB up to 4 GHz and typical gain of 14 dB at 2 GHz.
Hittite Microwave Corp., the world class supplier of complete MMIC based solutions for communication & military markets, has introduced two new wideband direct I/Q modulators which are ideal for automotive, broadband, cellular/3G, WiMAX/4G, military and test & measurement equipment applications between 20 and 4000 MHz.
The N2784A and N2785A one- and two-arm probe positioners provide quick and stable X-Y positioning using a simple “lift and drop” motion to set the probe in place. The N2784A probe positioner provides quick and stable X-Y positioning with only a “lift and drop” motion to put the probe in place for PC boards and devices that require hands-free probing.