MWJ China MWJ China

RF & Microwave Industry News
RF & Microwave Industry News RSS Feed RSS

Modular Design of Power Amplifiers

A modular power amplifier concept using the AdrenaLine splitter/combiner that permits amplifier designers to concentrate on higher level design tasks such as linearization techniques
November 1, 1999
Anaren Microwave Inc.
0 Comments
Modular Design of Power Amplifiers Anaren Microwave Inc. E. Syracuse, NY Power amplifier designers today face increased peak power-handling requirements due to the new digital modulation forms used in wideband CDMA (W-CDMA) systems. At the same time, the power amplifiers must meet stricter linearity requirements and the available RF/microwave...
Read More

Nonlinear Waveform Prediction in Fast Microwave Circuits

A time domain, transient analysis simulator that allows the prediction of waveforms in fast, nonlinear circuits in which accurate S-parameter data can be imported and used
November 1, 1999
Optotek Ltd.
0 Comments
Nonlinear Waveform Prediction in Fast Microwave Circuits Optotek Ltd. Kanata, Ontario, Canada MMICAD WAVEFORM,™ a new time domain, transient analysis simulator, allows the prediction of waveforms in strongly nonlinear circuits in which accurate S-parameter data can be imported and used in the simulation. The new time domain software is...
Read More

Circularly Polarized, Aperture-coupled Patch Antennas for a 2.4 GHz RFID System

The design of aperture-coupled patch antennas for an active read/write microwave tagging system using a circular polarization modulation
November 1, 1999
Marcel Kossel, Hansruedi Benedickter, Werner Bachtold, Roland King and Jan Hansen
1 Comment
Circularly Polarized, Aperture-coupled Patch Antennas for a 2.4 GHz RFID System Marcel Kossel, Hansruedi Benedickter and Werner Bächtold Swiss Federal Institute of Technology (ETH), Zurich Laboratory for Electromagnetic Fields and Microwave Electronics Zurich, Switzerland Roland Küng University of Applied Sciences Rapperswil (HSR) Rapperswil, Switzerland Jan Hansen Swiss Federal Institute...
Read More

Intermodulation Characteristics of Ferrite-based Directional Couplers

Minimizing the efects of intermodulation and cross-modulation in ferrite-based passive components through proper selection of ferrite core materials with regard to permeability and size
November 1, 1999
Shane Collins and Kieran Flynn
0 Comments
Technical Feature Intermodulation Characteristics of Ferrite-based Directional Couplers Shane Collins and Kieran Flynn Please click here to view the pdf file of the Technical Feature...
Read More

A Low Cost, High Performance Point-to-point Slotted Waveguide Array

Design and measurement of a resonant slotted waveguide array for a point-to-point application at 23 GHz
November 1, 1999
Bengt Svensson, Goran Snygg and Per Holmberg
0 Comments
A Low Cost, High Performance Point-to-point Slotted Waveguide Array A slotted waveguide array intended for point-to-point radio link applications has been designed for the 23 GHz frequency band with a total bandwidth of more than 10 percent. (Resonant slot antennas typically have a lower percentage bandwidth.) The antenna shows...
Read More

A Primer on Bonding Wire Parameters

Lead bonding wire fundamentals
November 1, 1999
Mike Greenelsh
0 Comments
A Primer on Bonding Wire Parameters A fine wire manufacturer offers some fundamentals for those involved with lead bonding wire. Mike Greenelsh California Fine Wire Grover Beach, CA Ongoing demands for higher IC utilization with minimal board real estate are producing high densities of connections between chips and packages....
Read More

Devices

November 1, 1999
0 Comments
Components 100 dB Isolation SP4T Switch The model SWN-1170-4DT-AKG-STANDARD option 120 ultrabroadband SP4T switch is capable of 100 dB isolation over the 100 MHz to 20 GHz frequency band. Insertion loss is < 4.5 dB, SWR is 1.9 and supply voltages are +5 V at 176 mA and -12...
Read More