CABLES & CONNECTORS
PT Test Cable
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector and smart armoring module. Thus, Anoison offers top-grade test cables at a more reasonable cost. A great test cable must be durable. While most test cables in the market perform well in pulling and crushing, they often get damaged due to frequent twisting and bending at the cable end. Anoison has addressed this issue, and the PT cable can withstand frequent twisting and bending over the long term.
Anoison
www.anoison.com
EMI Filtered Connectors
Mobix Labs Inc. launched its latest EMI filtered ARINC 404 and ARINC 600 connectors for defense and aerospace applications. These versatile connectors can be customized with planar arrays, ceramic Pi tubes or chip capacitors to meet demanding military specifications. The new connectors are designed to deliver exceptional performance and reliability, featuring advanced EMI filtering options to ensure optimal signal integrity and minimal resonance. They offer insertion loss of 70 to 80 dB for Pi filters and 50 to 60 dB for C filters.
Mobix Labs Inc.
www.mobixlabs.com
Non-Magnetic Connectors
Withwave’s non-magnetic connectors are widely used in applications that experience strong magnetic field can cause interference or introduce errors, such as quantum computing, magnetic resonance imaging (MRI) equipment and aerospace industry. They feature a DC to 40 GHz frequency range and are available in various interface sizes.
withwave co., ltd
www.with-wave.com
AMPLIFIERS
Solid-State LS-Band Amplifier
Exodus Advanced Communications’ AMP2074P-LC-8 KW pulse amplifier is designed for pulse/HIRF, EMC/EMI MIL-STD 461/464 and radar applications. Providing superb pulse fidelity 1.0 to 2.5 GHz, 10 KW typical and up to 100 usec pulse widths. Duty cycles to 6 percent with a minimum 69 dB gain. Available monitoring parameters for forward/reflected power in watts and dBm, VSWR, voltage, current, temperature sensing for outstanding reliability and ruggedness in a compact configuration.
Exodus Advanced Communications
www.exoduscomm.com
Power Amplifier
Falcomm has sought to provide the next big leap in technology that will drastically improve energy efficiency over the state of the art. As part of their efforts, Falcomm has released their first power amplifier product, the FCM1401. The power amplifier product features Falcomm’s proprietary technology, the ultra-efficient Dual-Drive™ architecture, and was implemented using the GlobalFoundries 130NSX1 process. It offers significant advantages in its exceptional performance, improved energy efficiency and thermal management cost reduction.
Falcomm
www.falcomm.com
Low Noise Amplifier
Richardson RFPD, Inc., an Arrow Electronics company, announced the in-stock availability and full design support capabilities for a new RF low noise amplifier from Guerrilla RF, Inc. The GRF2110 is a broadband, ultra-low noise linear amplifier designed for Wi-Fi 6/6E, small cell, wireless infrastructure and other high performance RF applications up to 8 GHz. The standard tune exhibits outstanding noise figure, linearity, return loss and gain flatness from 5 to 8 GHz.
Richardson RFPD
www.richardsonrfpd.com
RF Signal Amplifier
Model A10200 is an ultra-small footprint, ultra-wideband, high power amplifier designed for high frequency, high power, signal amplification. With an ultra-high bandwidth of almost 20 GHz and up to +28 dBm power into 50 Ohms, the A10200 is the ideal complimentary amplifier to any signal source that needs an extended power boost for demanding applications.
Tabor Electronics
www.taborelec.com
VHF to S-Band Low Noise Amplifiers
Teledyne e2v HiRel announced the availability of two enhanced plastic VHF to S-Band low noise amplifiers (LNAs), models TDLNA2050EP and TDLNA0430EP which are ideal for use in demanding high-reliability applications where low noise figure, minimal power consumption and small package footprint are critical for success. These LNAs, developed on a 250 nm enhancement depletion mode pseudomorphic high electron mobility transistor (pHEMT) process, are available in an 8-pin dual-flat no-lead 2 × 2 × 0.75 mm plastic surface-mount package.
Teledyne e2v HiRel
www.teledynedefenseelectronics.com
TEST & MEASUREMENT
Thermoelectric Refrigeration Cooling/Heating System
Cernexwave’s thermoelectric refrigeration cooling/heating system is a great solution to bring your components to the optimum temperature for testing. They have a temperature control range of -45°C to +120°C with fast temperature change speed and high accuracy. The large cooling/heating plate dimensions and small overall footprint allow these units to be used for a great range of components in labs of any size.
Cernexwave
www.cernexwave.com
Multi-Channel Frequency Analyzer
The CNT-102 high performance frequency/time-interval analyzer supports parallel frequency, phase or time measurements on two input channels simultaneously. Gap-free technology, along with 14 ps resolution, up to 13 digits/s frequency resolution and 1M results/s sampling simplifies ADEV and related frequency stability measurements. Three timebase options and RF frequency support up to 15, 20 or 24 GHz via software upgrade on select hardware configurations satisfies a wide range of performance demands and/or budget.
Pendulum Instruments
www.pendulum-instruments.com
RF Microwave Generators
Saelig Company, Inc. has introduced Rigo DSG5000 Series RF microwave generators which can generate high-quality RF signals up to 20 GHz with amplitude, frequency, phase and pulse modulation capabilities. These generators are available with two, four, six or eight independent RF channels, housed in a 2U rack-mountable case. The DSG5000 Series of signal sources feature an impressive ±1-degree long-term phase stability between channels and they are designed for high frequency work in applications like radar and quantum research.
Saelig Company, Inc.
www.saelig.com