NEW! HYPERLABS 110 GHz 6 dB Attenuator
HYPERLABS has released the HL9429 110 GHz 6 dB attenuator, which offers industry leading performance and competitive pricing. The HL9429 can be ordered in matched pairs providing optimized phase and amplitude matching for differential signal applications. The HL9429 attenuator housing dimensions are 1.13 x 0.38 x 0.38 in. (28.7 x 9.7 x 9.7 mm) and comes with 1.0 mm connectors. S-parameter data is available upon request. For more information, contact the HYPERLABS factory directly or your local sales representative.
HYPERLABS INC.
www.hyperlabs.com
INSULATED WIRE INC.
Today’s advanced military platforms depend on the quality, selection, support and service that are the hallmarks of IW’s product lines. They offer a range of jacket materials, armoring and a wide variety of connectors including SMA, TNC, N, SC, 2.4 mm and 7 mm to provide highly reliable, application specific solutions.
Insulated Wire
https://iw-microwave.com
GaN SSPA Offers 630 W for SmallSat & SAR Applications
CTT Model AGN/099-5860-P is a GaN-based SSPA specifically designed for — and currently operating in — multifunctional SmallSat and airborne synthetic aperture radar (SAR) systems. Operating frequency is 9.4 to 9.9 GHz with a pulse power output of 630 W, small signal gain is 60 dB, minimum and noise figure is +10 dB. A higher power option is available. Since 1981, CTT has been consistently supplying complex, highly engineered microwave electronics solutions to the defense, aerospace and commercial electronics industries worldwide.
KRATOS Microwave U.S. – CTT
www.cttinc.com
Directional Coupler Covers 1 to 65 GHz
With frequency coverage of S- through V-Bands Model 101065016 exhibits excellent coupling and offers the ultimate solution for emerging designs and test and measurement applications including mmWave and 5G. Nominal coupling is 16 dB, ±2.0 dB, frequency sensitivity of ±1.2 dB (1 to 32 GHz) and ±1.5 dB (32 to 65 GHz), insertion loss of less than 2.8 dB and includes 1.85 mm female connectors. KRYTAR couplers offer solutions for ultra-broadband applications including electronic warfare, commercial wireless including mmWave, 5G, satcom, radar, signal monitoring and measurement, antenna beamforming and EMC testing environments.
KRYTAR
www.krytar.com
KVG Presents New Website with Outstanding Products
Superior products deserve superior presentation: KVG launched their new website on September 1, presenting their highly stable products with the best phase noise on the market. The newest high-end product of KVG is the high performance 100 MHz oscillator O-22-ELPN with extraordinarily low phase noise of -140 dBc/Hz at 100 Hz and -190 dBc/Hz noise floor. Visit KVG’s new website and learn more about the company and their products.
KVG Quartz Crystal Technology GmbH
www.kvg-gmbh.com
The Ways MMIC Filters Enable the Development of Next-Gen Systems
Traditionally, MMIC hasn’t been considered a viable technology for filter development. Next-generation systems are reconsidering the specification trade-off space to ease loss and rejection requirements in exchange for size reduction. Due to the precision of MMIC lithography, MMIC is uniquely positioned to emerge as the ideal solution to shifting trends. This white paper discusses what Marki Microwave contends to be the key metrics of a modern competitive filter and the capabilities of GaAs MMIC filters demonstrated thus far.
Marki Microwave/RFMW
www.markimicrowave.com/assets/appnotes/WP_MMIC_Filters_NextGenSystems.pdf
MIcable Low PIM Cable Assemblies
MIcable Low PIM cable assemblies provide flexible, hand formable and corrugated cable versions and also allow for various connector selections of SMA, N, 4.3/10 and L29 with low PIM and low VSWR performance, they are good choices for the distributed antenna systems and other complex multi-carrier jumper connections as well as low intermodulation testing applications.
MIcable
www.micable.cn
20 GHz to 36 GHz and 28 GHz to 40 GHz YIG-Based Notch Filters for EW and ECM
Breakthrough product line of notch filters that cover mmWave frequencies. This family of new yttrium iron garnet based filters provide superior notch depths over the 20 to 40 GHz frequency range. Two models provide tunable notches of 15 MHz minimum at 40 dB down across the 20 to 36 GHz (MLFR-2036) and 28 to 40 GHz (MLFR-2840) bands. Typical passband insertion loss is 3 dB and the passband range is 20 to 42 GHz.
Micro Lambda Wireless
www.microlambdawireless.com
Miniature Air Coils for High-Reliability, RF and Microwave Applications
Microwave Components, Inc. (MCI) in Dracut, Mass., is a small, veteran owned manufacturer of miniature air coils. MCI has proudly been delivering custom, high Q, miniature air inductors to the aerospace, defense and space markets since 1978. Materials include bare and insulated gold, copper, silver, gold plated copper, nickel copper alloy and aluminum wire. Inductances from 1 to 1000+ nH.
Microwave Components, Inc.
www.mcicoils.com
See Norden’s VPX Transceiver Specs
Norden’s wideband VPX transceiver is used across military applications. It offers 2 to 18 GHz operation in a versatile OpenVPX platform. The NUDC2-18/1.3-2.3 includes internal LOs which provide an instantaneous IF bandwidth of 1 GHz and exceptional noise figure. The NUDC2-18_1.3-2.3 is currently in production. Contact Norden with your specific requirements and discuss custom configurations to meet your specification needs.
Norden Millimeter
https://nordengroup.com/wp-content/uploads/Norden-Transceiver.pdf
PLATH Signal Products of PLATH Group
PLATH Signal Products is a sensor division company within the PLATH Group. They formed in 2021 with the mission of taking their COMINT subsystems to market via system integrators, resellers and agents. Their antenna, monitoring receivers, direction finders and advanced Interception Automation subsystems are available as integrable elements of System Integrator‘s own SIGINT or COMINT platform. PLATH draws upon seven decades of signals experience to support partners in the development of operationally superior and effective systems.
PLATH Signal Products
www.plath-signalproducts.com
RF Subsystems & Integrated Filter Products by Q Microwave
Q Microwave supplies customers with high performance switch filter subsystems, down-converters, up-converters and more. Discover its range of integrated products trusted for 25 years by leading providers of applications like frequency conversion, electronic warfare systems and radar systems.
Q Microwave
www.qmicrowave.com/rf-subsystems