ANTENNAS
13 - 38 GHz Low Profile Antennas
The ValuLine® series low profile antennas has been expanded to include antennas operating at 13 to 38 GHz for use in cellular, PCS and Private User Networks. The units can also be customized for direct integration with OEM radio systems. The electrical performance of the new antennas meets or exceeds the performance standards of the European Telecommunications Standards Institute, the Federal Communications Commission, the UK Radio Communications Agency and Germany's BAPT. The antennas are available in diameters of 0.3, 0.6, 0.8 and 1.2 m in frequencies of 13, 15, 18, 23, 26, 28 and 38 GHz.
Andrew Corp.,
Orland Park, IL
(800) 255-1479.
3 dBi Omnidirectional Antenna
The model PCD800V 3 dBi omnidirectional antenna is designed to replace the standard rubber ducky or hip antenna on wireless telephone terminals or data devices. The unit allows the subscriber to place the antenna in a remote location for better signal strength. Power-handling capability is 10 W and SWR is less than 2. In addition, the unit is vertically polarized with an elevation pattern of 60° and 360° in azimuth. Size: 0.50" x 8.50". Models are also available to cover the cellular 824 to 896 MHz, PCS 1850 to 1970 MHz and spread spectrum 2.4 to 2.5 MHz frequencies.
Astron Antenna Co.,
Sterling, VA
(703) 450-5517.
Linearly Polarized Patch Antenna
The model S34017P linearly polarized patch antenna provides for both reception and transmission in the 3400 to 3600 MHz frequency band. The unit features a low profile design for minimum visual impact, making it suitable for discreet antenna installation. The antenna is designed with a microstrip array that provides a minimum of 17 dBi gain with a nominal 16° x 18° half-power beamwidth. Impedance is 50 W and SWR is 1.5. Each patch antenna combines good RF performance in a discrete and stylish antenna housing that can be mounted easily in challenging situations. Size: 11.000" x 10.000" x 0.875".
Cushcraft Corp.,
Manchester, NH
(603) 627-7877.
6 - 18 GHz Dual-input Horn Antenna
The model C390-205 3:1 bandwidth broadband quad-ridge horn antenna operates from 6 to 18 GHz. The unit's dual-orthogonal input ports provide polarization diversity. The inputs are TNC female connectors. The horn antenna is capable of handling 200 W CW input power and 1 kW pulse. Additional specifications include gain of 6 to 14 dBil, linear vertical/horizontal (or both) polarization, SWR of 2 (max), port-to-port isolation of 25 dB (min) and port-to-port phase tracking of +/-5°. Size: 1.2" x 1.2" x 5.0".
Microwave Engineering Corp.,
North Andover, MA
(978) 685-2776.
5 GHz Flat-panel Antennas
These 5 GHz directional flat-panel antennas operate in the National Information Infrastructure and spread spectrum bands from 5.25 to 5.85 GHz. The antennas are available in 6" (18 dBi gain), 12" (23.5 dBi gain) and 24" (28.5 dBi gain) sizes with a thickness of only 1". The antennas are concealed easily and can be painted to blend into many architectural environments. Twenty-four-hour delivery is available.
Gabriel Electronics Inc.,
Scarborough, ME
(207) 883-5161.
Ka-band Communication Antennas
These low profile antennas are designed for use in terrestrial communications applications and consist of a set of two microstrip arrays for simultaneous transmit and receive operation. The units are packaged in a single housing with an integral radome, mounting bracket and separate coaxial connector for each array, and are environmentally sealed and suitable for indoor or outdoor use. The model KA301 antenna operates over K-band frequencies of 18.58 to 18.76 GHz and 18.92 to 19.10 GHz with gain of +25 dBil and interelement isolation of greater than 45 dB. Size: 5" x 9" x 1".
GainTech Antenna Corp.,
College Park, MD
(888) 289-4002.
WLAN Directional Panel Antennas
The MP24000 series directional panel antennas are designed for wireless local area network (WLAN) applications covering 2300 to 2500 MHz. The models MP24008, MP24011 and MP24013 units offer gain capabilities of 8, 11 and 13 dBi, respectively, with an SWR of less than or equal to 1.5. The 8 dBi model includes a female SMA bottom-feed connector while the other two models are available with female TNC bottom-feed connectors. Various pigtail and connector options are also available upon request.
MAXRAD Inc.,
Hanover Park, IL
(800) 323-9122 or (630) 372-6800.
High Gain, Flat-plate Datalink Antenna
The model PCA18-64C 18", C-band, printed circuit datalink antenna is lightweight, environmentally sealed and provided with mounting provisions. The unit's specifications include a frequency range of 6.4 to 6.5 GHz, gain of 25 dBic (typ), right-hand circular polarization, high power bandwidth of 7° (nom) and SWR of 1.7 (min). RF Connectors are SMA female. Size: 18.00" x 0.25". Weight: 2.4 lb.
Seavey Engineering Associates Inc.,
Pembroke, MA
(781) 829-4740.
Line-of-sight Antennas
The Advantage series low profile antennas operate at 18, 21, 26 and 38 GHz. The units are available in 0.3 and 0.6 m diameters and are designed for use in cellular, PCN and wireless access applications. The units are compliant with relevant ETSI and UPT regulations and complement the company's existing range of line-of-sight antennas. Both single- and dual-polar antenna versions are available.
Precision Antennas,
Stratford-upon-Avon, Warwickshire, UK
+44(0)1789 266131.