PMI Model No. PE2-30-0R56R0-5R0-22-12-SFF is a 500 MHz to 6.0 GHz low noise amplifier that typically provides 30 dB of gain. The gain flatness is ±1.0 dB maximum with a noise figure is 5.0 dB typical. This amplifier provides a minimum OP1 dB of +21 dBm.
The VSWR is 2.0:1 maximum into 50 ohms impedance and operates on a single DC supply of +12 to +15 volts with 325 mA nominal current consumption. This unit is supplied with field removable SMA female connectors and in our standard PE2 housing that measures 1.08" x 0.71" x 0.29".
Specifications:
|
Frequency Range |
0.5 to 6.0GHz |
|
Gain |
30dB typ. |
|
Gain Flatness |
±1.0dB max. |
|
Noise Figure |
5.0dB typ. |
|
OP1dB |
+22dBm typ. +21dBm min. |
|
VSWR In/Out |
2.0:1 max. |
|
DC Voltage Supply |
+12 to +15 |
|
DC Current Draw |
325mA nominal |
|
RF Connectors |
SMA (F) - Field Removable |
|
Housing |
PE2 |
|
Finish |
Gold Plated |
Environmental Ratings:
|
Temperature: |
-55ºC to +85 ºC Operating |
|
-65ºC to +125 ºC Non-Operating |
|
|
Humidity: |
MIL-STD-202F, Method 103B Cond. B |
|
Shock: |
MIL-STD-202F, Method 213B Cond. B |
|
Altitude: |
MIL-STD-202F, Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F, Method 107D Cond. A |
