We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
Rohde & Schwarz introduced a modular probe system for precision measurements up to 9 GHz. The R&S RT-ZM probe system used in combination with a Rohde & Schwarz oscilloscope is an excellent solution for easily and precisely measuring fast signals. It offers a maximum bandwidth up to 9 GHz, a DC offset range of ±16 V and the MultiMode function that allows users to switch between test modes without recontacting.
Rohde & Schwarz has successfully demonstrated the generation and analysis of 5G signals based on the characteristics as specified in the Verizon open trial specifications. The R&S SMW200A vector signal generator and the R&S FSW signal and spectrum analyzer both provide outstanding test and measurement capabilities, resulting in an EVM performance of 1 percent when applying these 5G signals.
Rohde & Schwarz has introduced the R&S FSVA, an enhanced mid range signal and spectrum analyzer for signal analysis and demodulation up to millimeter-wave frequencies. Users benefit from the features of this instrument in all measurements up to 40 GHz where low phase noise, high sensitivity and wide analysis bandwidth are required. R&S FSVA offers a 160 MHz analysis bandwidth over its entire frequency range.
The new R&S TS7124 RF shielded box from Rohde & Schwarz offers the best shielding effectiveness, the largest interior dimensions and the most flexible antenna configurations in its class. It provides reliable, reproducible measurement results in a shielded test environment, especially during the production of wireless devices. Unique in its class, the R&S TS7124 offers shielding in excess of 80 dB at 6 GHz. Its frequency range from 300 MHz to 6 GHz.
R&S CMW290 functional radio communication tester from Rohde & Schwarz is the right solution for users who want to integrate wireless modules into their platforms and test them. For end-to-end testing of applications, the R&S CMW290 can simulate a cellular network and set up a connection between the application on the device or system and the server. IMS server, audio or eCall/ERA-Glonass functionality are also available for the R&S CMW290.
The R&S FSWP phase noise analyzer and VCO tester from Rohde & Schwarz enables ultrasensitive and ultra-fast phase noise measurements. It also allows users to measure the spectral purity of signal sources such as generators, synthesizers, high-end oscillators (OCXO, DRO, …) and voltage-controlled oscillators (VCO) more quickly than with any other solution. The high-end instrument covers a frequency range up to 26 GHz and offers a top dynamic range.
The completely redesigned R&S NRPxxS and R&S NRPxxSN USB three-path diode power sensors offer unprecedented measurement speed and accuracy, even at low levels. The sensors enable 10,000 triggered measurements per second with a minimum trigger resolution of 100 µs. A special mode permits 50,000 equidistant measurements per second. The improved design decreased the lower measurement limit to -70 dBm, resulting in a very wide dynamic range of 93 dB.
With its new microwave frequency options, the R&S SMW200A vector signal generator supports development applications requiring complex multichannel scenarios up to 40 GHz. It is the only instrument on the market to combine a baseband generator and RF generator with fading, AWGN and MIMO capabilities in a single box. It can be used for radar and satellite component and module tests as well as for future 5G technology development.
Rohde & Schwarz has successfully demonstrated the generation and analysis of 5G signals based on the characteristics as specified in the Verizon open trial specifications. The R&S SMW200A vector signal generator and the R&S FSW signal and spectrum analyzer both provide outstanding test and measurement capabilities, resulting in an EVM performance of 1 percent when applying these 5G signals.
Rohde & Schwarz has introduced the R&S FSVA, an enhanced mid range signal and spectrum analyzer for signal analysis and demodulation up to millimeter-wave frequencies. Users benefit from the features of this instrument in all measurements up to 40 GHz where low phase noise, high sensitivity and wide analysis bandwidth are required. R&S FSVA offers a 160 MHz analysis bandwidth over its entire frequency range.
The new R&S TS7124 RF shielded box from Rohde & Schwarz offers the best shielding effectiveness, the largest interior dimensions and the most flexible antenna configurations in its class. It provides reliable, reproducible measurement results in a shielded test environment, especially during the production of wireless devices. Unique in its class, the R&S TS7124 offers shielding in excess of 80 dB at 6 GHz. Its frequency range from 300 MHz to 6 GHz.
R&S CMW290 functional radio communication tester from Rohde & Schwarz is the right solution for users who want to integrate wireless modules into their platforms and test them. For end-to-end testing of applications, the R&S CMW290 can simulate a cellular network and set up a connection between the application on the device or system and the server. IMS server, audio or eCall/ERA-Glonass functionality are also available for the R&S CMW290. 
The R&S FSWP phase noise analyzer and VCO tester from Rohde & Schwarz enables ultrasensitive and ultra-fast phase noise measurements. It also allows users to measure the spectral purity of signal sources such as generators, synthesizers, high-end oscillators (OCXO, DRO, …) and voltage-controlled oscillators (VCO) more quickly than with any other solution. The high-end instrument covers a frequency range up to 26 GHz and offers a top dynamic range.
The completely redesigned R&S NRPxxS and R&S NRPxxSN USB three-path diode power sensors offer unprecedented measurement speed and accuracy, even at low levels. The sensors enable 10,000 triggered measurements per second with a minimum trigger resolution of 100 µs. A special mode permits 50,000 equidistant measurements per second. The improved design decreased the lower measurement limit to -70 dBm, resulting in a very wide dynamic range of 93 dB.
With its new microwave frequency options, the R&S SMW200A vector signal generator supports development applications requiring complex multichannel scenarios up to 40 GHz. It is the only instrument on the market to combine a baseband generator and RF generator with fading, AWGN and MIMO capabilities in a single box. It can be used for radar and satellite component and module tests as well as for future 5G technology development.