Mini-Circuits, Brooklyn, N.Y.

Mini-Circuits announces its new high pass filter HFCV-145+, an LTCC-based 7 section design that extends the lower frequency cut-off range of the existing HFCN series to 145 MHz. Systems that previously relied on active or lumped element filtering to support these lower frequencies can save power and system complexity...

Mini-Circuits PHA-1+ ultra high dynamic range MMIC amplifier supports low intermodulation amplification over the broad frequency range of 50 MHz to 6 GHz. This design provides a unique combination of high output IP3 (typically +42 dBm) while maintaining a noise figure less than 3 dB up to 4 GHz...

A series of wideband 50 ? coaxial test cables has been introduced that feature extra rugged construction with integrated strain relief for longer life. The CBL-series Coaxial-Flex test cables are designed for use from DC to 18 GHz and are useful over a temperature range of –55° to +105°C....

Double-balanced mixers are used extensively in transmitters and receivers. For frequencies above 5 GHz the designs are normally realized using strip line and microstrip techniques. This is because distributed element baluns become smaller in size and more attractive for design as the frequency increases. Semiconductor-based mixers are the most...

Double-balanced mixers are used extensively in transmitters and receivers. For frequencies below 5 GHz, the designs are normally realized using ferrite-based transformers, because they are very compact and their technology is mature. As the operating frequency increases, distributed element baluns become smaller in size and more attractive. Semiconductor-based mixers...

ON THE COVER Low Cost Directional Couplers Mini-Circuits Brooklyn, NY Ever expanding applications of RF and microwaves for wireless and cable applications have revived the development efforts of components at these frequencies. There is a continuing demand to reduce size and cost, and to improve performance and quality at...

COVER FEATURE HIGH PERFORMANCE, LOW COST, SURFACE-MOUNT QUADRATURE COUPLERS BLUE CELL TECHNOLOGY, A FAMILY MEMBER OF MINI-CIRCUITS Brooklyn, NY As system requirements increase, the demands placed on passive components also continue to rise in an effort to meet ever-increasing consumer demands. Industry is demanding higher performance in smaller footprints...

Low Cost, Ultra-high Isolation SPDT Switches Mini-Circuits Brooklyn, NY Wideband test instrumentation often requires signal routing. This function is usually accomplished with mechanical switches, which are expensive and slow. When isolation requirements are not high, electronic switches may be utilized. However, most high isolation electronic switches available in today's...

High Isolation Switches with Integral Drivers Mini-Circuits Brooklyn, NY Solid-state switches are used extensively for routing or selecting RF and microwave signals. If the isolation between the selected and unselected ports is not high, leakage of unwanted signals could degrade the carrier-to-interference ratio. Several switches may have to be...