Microwave Journal
www.microwavejournal.com/articles/33954-ims-2020-product-showcase

IMS2020 Product Showcase

May 13, 2020

Agile Microwave Technology Inc.
Broadband 15 W Power Amplifier

Agile Microwave Technology Inc.

AgileMwT’s broadband 15 W power amplifier operating from 2 to 18 GHz is offered in a compact module configuration. AMT-A0350 provides Psat of 15 W typical with flat small signal gain of 43 dB typical, ± 1 dB typical gain flatness with VSWR of 1.8:1 typical. This family of power amplifiers are competitively priced and ship from stock or have short lead times. AgileMwT offers great value with innovative designs.

www.agilemwt.com

Altum RF
GaN Distributed Amplifier

Altum RF

Altum RF’s ARF1307C7 is a packaged, GaN distributed amplifier for 2 to 20 GHz applications. The amplifier provides 10 W saturated output power and 17 dB small-signal gain, with 11 dB of power gain and 20 percent power-added efficiency. The ARF1307C7 features a robust, RoHS-compliant, 7 x 7 mm QFN high-performance ceramic package, with excellent thermal and electrical properties. The ARF1307C7 is suitable for higher performance commercial- and defense-related applications, such as test and measurement equipment, EW and commercial or defense radar systems.

www.altumrf.com

American Microwave Corp.
Absorptive/Non-Reflective S25T Switch

American Microwave Corp.

American Microwave Corp. announced its latest preliminary product development. AMC Model Number MSN-0518-25T-30DB-HERM-1JV is an absorptive/non-reflective S25T switch that is hermetically sealed with an integral 30 dB coupler on its common port. It works from 0.5 to 18 GHz. Insertion loss of 7.5 dB max and has an isolation of 60 dB min. Switching speed of <2 μSec and a switching transient of <200 mV pk-pk. OIP2 is >+65 dBm and OIP3 >+35 dBm. Output 1 dB compression point of +20 dBm.

www.americanmic.com

AnaPico Ltd.
Ultra-Agile Vector Signal Generator

AnaPico Ltd.

The APVSG is an ultra-fast-switching vector-modulated signal source, covering a continuous frequency range from 0.01 to 40 GHz. The standard APVSG enables outstanding ultra-fast CW frequency sweeping, chirping, intra-pulse modulation, pulse shaping, all with very low phase noise. A high performance internal I/Q modulator enables customized modulation waveforms and supports dedicated modulation schemes, including avionics modulation. Now also available as multi-channel version APVSG-X with one to four channels.

www.anapico.com

Anokiwave
Intelligent Array IC Solutions

Anokiwave

Anokiwave leads the mmWave market with its Silicon ICs for 5G, SATCOM, and RADAR applications shipping in high volume commercial deployments. Their portfolio of IC options enables intelligent, scalable antenna arrays that can be configured for different use cases, power levels and frequency bands. Anokiwave is the trusted choice of Tier-1 and -2 OEMS worldwide. Visit Anokiwave at booth 1439.

www.anokiwave.com

Anritsu
220 GHz Broadband VNA

Anritsu

The VectorStar™ ME7838G 70 kHz to 220 GHz broadband VNA provides industry-best, single-sweep coverage addressing the need for on-wafer device characterization. The compact, high-performance mmWave module enables direct connection to the probe for accurate, stable results. The ShockLine™ MS46131A 1-port VNA provides unprecedented coverage to 43.5 GHz. Leveraging NLTL technology enhances accuracy and measurement repeatability. Its small size allows direct connection to the DUT, improving measurement stability and simplifying test configurations. Visit Anritsu at booth 1847.

www.anritsu.com

B&Z Technologies Inc.
Low Noise Microwave Amplifier

B&Z Technologies Inc.

B&Z Technologies, a state-of-the-art low noise microwave amplifier company based in New York, now offers 18 to 40 GHz amplifiers with less than 2.5 dB noise figure. Standard configuration has typical gain of 34 dB, output 1 dB compression power of +10 dBm, gain flatness of ± 2 dB and input/output VSWR of 2.0:1. These can be custom configured for higher gain, higher power or better flatness (up to ± 1.5 dB). Its standard co-axial housing can be disassembled also, if needed, to be used as a drop in amplifier.

www.bnztech.com

Cadence Design Systems
Cadence RF/Microwave Solutions

Cadence Design Systems

Cadence enables Intelligent System Design for 5G with a comprehensive portfolio spanning IP, verification, implementation and mixed-signal/analog/RF. The Virtuoso® RF Solution streamlines the RF design flow with a “golden” schematic that drives layout implementation, simulation, and physical verification. The recent integrations of AWR Corp. and Integrand Software further increase productivity for complex, high-frequency RFIC and application development. Combined with the organically grown Virtuoso, Clarity, and Sigrity solutions, Cadence offers a complete electromagnetic signoff solution.

www.cadence.com

AWR® V15 Software

Cadence Design Systems

Cadence announced the latest release of the AWR®Design Environment® platform, V15. This version offers new and expanded capabilities to support power amplifier and antenna/array design, EM modeling and RF/microwave IP integration within heterogeneous systems, enabling designers to better address the design challenges of MMIC/RFIC, package/module, and PCB technologies driven by 5G, automotive, and aerospace and defense application. Discover the power of Cadence with AWR software at IMS2020 at booth 829.

www.cadence.com/go/awr

Cernex
Frequency Multipliers

Cernex

Cernexwave’s CFM series active frequency multipliers cover the frequency range of 10 MHz to 500 GHz. They can be designed to multiply an RF signal 2, 3, 4 or as many as 36 times with its custom multiplier chain assemblies. These multipliers utilize state of the art MIC and MMIC technologies to provide highly stable, reliable and efficient frequency extenders for system applications.

www.cernexwave.com

Charter Engineering Inc.
5G RF Switches from DC–40 GHz

Charter Engineering Inc.

CEI introduces a new series of RF switches operating from DC-40 GHz utilizing 2.92 mm female connectors. The switches feature outstanding characteristics in insertion loss of 0.6 dB max and return loss of 1.50:1 max. The highly repeatable RF switches are targeted to 5G applications and are available in a variety of configurations including failsafe, latching and normally open.

www.ceiswitches.com

Ciao Wireless Inc.
Ultra-Broadband Amplifiers

Ciao Wireless Inc.

Ciao Wireless Inc. has introduced its latest product line of ultra-broadband amplifiers covering 2 to 40 GHz, and features an integrated wideband output detector option for communication applications. The series of amps have usable bandwidth over 1 to 40 GHz in most cases. Units are qualified for use in most Hi-Rel and harsh commercial applications.

www.ciaowireless.com

Cicor
Innovative Technology Solutions

Cicor

The Cicor Group is a globally active development and manufacturing partner with innovative technology solutions for the electronics industry. With about 2,000 employees at ten production sites, Cicor offers highly complex printed circuit boards, printed electronics, hybrid circuits and substrates as well as comprehensive electronic manufacturing services including microelectronic assembly and plastic injection molding. Cicor supplies customized products and services from design to the finished product from one source.

www.cicor.com

Coilcraft
Ceramic Chip Inductors

Coilcraft

Coilcraft 0402CT Series ceramic chip inductors feature a maximum height of just 0.45 mm - a 30 percent lower profile than competitive products. Offered in 23 inductance values from 1.2 to 56 nH (with, 5 percent, 3 percent or 2 percent tolerance), the 0402CT provides excellent Q Factor performance - up to 84 at 2.4 GHz. It also offers self-resonant frequencies as high as 27.5 GHz and current ratings up to 2.3 Amps (Irms).

www.coilcraft.com

Copper Mountain Technologies
SC Series Compact VNAs

Copper Mountain Technologies

The SC Series Compact VNAs deliver lab-grade performance up to 9 GHz with 16 ms measurement speed, 140 dB dynamic range and higher output power. This series combines advanced performance with all the features engineers have come to expect. This innovative approach delivers high measurement accuracy and enables users to take advantage of faster processors, newer computers, and larger displays. Copper Mountain VNAs include excellent customer service, automation support and years of engineering expertise to users.

www.coppermountaintech.com

Crane Aerospace & Electronics
RF Converter Miniaturization Using Multi-Mix®

Crane Aerospace & Electronics

Wideband RF converter assembly in package less than 5”× 2”× 0.5”. Offers 5x to 10x reduction over traditional converters - multi-layer multi-mix motherboard with double-sided SMT populated in a lightweight housing frame that provides excellent RF channelization and isolation, four integrated coherent wideband synthesizers, embedded pre-select frequency filters, fast tuning and settling times and low phase noise.

www.craneae.com

CTT Inc.
40 W Multi-Band GaN Power Amplifier

CTT Inc.

Designed for multi-function, radar, SATCOM and EW system design operating from C- through Ku-bands, this new SSPA offers SWaP solutions for many applications including EW jammers and multi-band mobile SATCOM terminals. CTT’s new model AGX/180-4656 covers 3 to 18 GHz with 40 W of CW power output. The compact size of 5.16 in. (L) x 4.90 in. (W) x 0.28 in. (H) offers RF/microwave designers an excellent choice for SWaP solutions in many applications, including EW jammers, and for transmit power in multi-band mobile SATCOM terminals. Visit CTT during IMS2020 at booth 1952.

www.cttinc.com

Custom Microwave Components Inc.
A Non-Blocking Switch Matrix

Custom Microwave Components Inc.

A non-blocking switch matrix with 72 inputs and 32 outputs is used to configure RF environments for carrier end-to-end backhaul and hand-over testing. Intuitive browser graphical user interface, easy to network and use API to support automated testing. Features include solid-state reliability and repeatability, modular line-replaceable active units with built-in spares, distributed hot-swappable redundant supplies, system health monitoring and reporting, ultra-low operating power (<85 W), ultra-quiet operation with a frequency of 0.7 to 3.0 GHz (optional 0.7 to 6.0 GHz), and insertion loss of 30 dB max. Visit Customave at IMS2020 booth 1304.

www.customwave.com

dB Control
High-Power Amplifiers

dB Control

dB Control offers six mmWave high-power amplifiers, including the dB-3201H microwave power module. This wideband MPM features a 30 to 38 GHz frequency range and 125 W of continuous wave power. It is designed for electronic countermeasures and electronic warfare applications so military personnel can experience faster exchanges of data and enhanced situational awareness. The dB-3201H enables additional channels of communication to combat congestion across traditional C-, X- and Ku- and lower Ka-band frequencies. Visit during IMS2020 at booth 801.

www.dBControl.com



Delta Electronics Mfg. Corp.
SMPM-T Connectors

Delta Electronics Mfg. Corp.

Delta’s SMPM-T connectors have a threaded retractable nut combined with SMPM Mil-STD-348 female interface, giving these connectors superior mechanical and electrical performance. These connectors are the perfect choice for applications requiring frequencies up to 40 GHz in demanding environments, involving vibration and/or temperature extremes. Centerline to centerline spacing can be as low as 5 mm, and Delta’s unique tooling options allow for simple mating and un-mating of the threaded interface. SMPM-T are available for both 0.047” and 0.086” cable termination options.

www.Deltarf.com

Empower RF Systems
Ultra-Broadband Amplifier

Empower RF Systems

This versatile single band CW SSPA is equally suited for RF and microwave digitally modulated communications and product testing. Utilizing 50 VDC GaN devices its class AB design is heavily biased towards class A and delivers exceptional EVM performance. Included for semiconductor test is a pulse modulated mode and a gated pulsed mode, with accurate metering in both cases. Control and monitoring is via touchscreen LCD or peer connected PC/browser with no software to install.

www.EmpowerRF.com

Eravant (formerly SAGE Millimeter)
Horn Antenna

Eravant

SAF-2434231535-328-S1-280-DP is a dual polarized, broadband scalar feed horn antenna assembly with orthomode transducer that covers several popular 5G bands in the frequency range of 24 to 42 GHz. The OMT provides high port isolation and cross-polarization cancellation. Integrated OMT enables the antenna to separate a circular or elliptical polarized waveform into two linear, orthogonal waveforms or vice versa. The horn exhibits 15 dBi gain and a 3 dB beamwidth of 35 degrees with -25 dB sidelobe levels.

Solid State Power Amplifier

Eravant

SBP-3233831838-KFKF-E1-HR is Eravant’s solid state power amplifier solution for high power radar and communication system applications. In 5G, common radar and communication frequency band, this GaN power amplifier delivers +38 dBm linear output power with 18 dB gain. Even for large signals, this amplifier provides good gain flatness across the frequency range of 32 to 38 GHz. The DC power requirement for the amplifier is +30 VDC/2 A. The amplifier employs Uni-Guide™ port configuration, which allows easy port orientation settings.

www.eravant.com

GLOBALFOUNDRIES
8SW RF SOI for 5G/4G LTE Smartphones

GLOBALFOUNDRIES

Manufactured by GLOBALFOUNDRIES®, 8SW RF SOI offers best-in-class performance for LNAs, switches and tuners in front-end modules for premier sub-8 GHz 5G and 4G LTE smartphones. Industry leaders are taking advantage of differentiated GF 8SW solutions to help bring these sleek new devices to market faster - devices that deliver an enhanced, more immersive user experience by enabling faster download speeds, more reliable connectivity for fewer dropped calls and higher quality connections, even at the network edge.

www.globalfoundries.com

Gowanda Components Group
Expanded Conicals

Gowanda Components Group

Gowanda’s newest broadband conical series - surface mount C102SM and C182SM and flying lead C102FL and C182FL - offer inductance ranges from 0.47 μH to 10.7 μH, DCR ohms from 0.19 to 7.10 and current rating mA DC from 150 to 815. They also meet outgassing requirements per ASTM E595 with a TML of 1 percent max. These conicals are designed for use in broadband communication applications for bias T’s, high frequency, microwave circuitry, RF test set-ups, test and measurement and transmission amplifiers. GCG booth 2214.

www.GowandaComponentsGroup.com

Herotek
26 to 40 GHz Amplifier

Herotek

Herotek offers a wideband mmWave amplifier. Model A2640205010A operates from 26 to 40 GHz and matched for low VSWR. It has gain of 20 dB with max gain variation of ± 2.5 dB, noise figure of 5 dB, P1dB output of +10 dBm and current draw of 180 mA at +12 V bias. This amplifier comes in a hermetically sealed package with removable connectors for drop in assemble and designed for both military and commercial applications.

www.herotek.com

Holzworth Instrumentation
50 GHz Real Time Phase Noise Analyzer

Holzworth Instrumentation

Holzworth will unveil the HA7063A 50 GHz downconverter during IMS2020. The HA7063A integrates seamlessly with the HA7063 Series Real Time Phase Noise Analyzer products to cover 10 MHz to 50 GHz. The advanced heterodyne downcoversion architecture provides optimal measurement noise floors and extremely fast acquisition speeds. Holzworth analyzers are the only industry solutions that fully integrates additive/residual measurement capabilities that span above 18 GHz (to 50 GHz) as well as the critical ability to measure the instrument’s true noise floor.

www.holzworth.com

HYPERLABS
Ultra-Broadband DC Blocks

HYPERLABS

HYPERLABS’ wideband component portfolio now includes ultra-broadband DC blocks covering the range from 20 kHz to over 67 GHz. The HL9430 Series will be offered at upper frequency ranges of 40, 50 and 67 GHz. These DC blocks have less than 1 dB insertion loss (typical) within the pass band with a smooth roll-off beyond the cutoff frequency. See these and all of its other ultra-broadband components at IMS2020, booth 1954.

www.hyperlabsinc.com

Insulated Wire (IW)
Cables

Insulated Wire (IW)

To support high power applications including EMC test, semiconductor processing, broadcast and other applications requiring high power signal transmission, IW’s 4806 and NEW 7506SP provide a flexible, low loss/phase stable alternative to solid wall cables. Using expanded PTFE dielectric for extremely low loss and phase stability over temperature, 4806 has been demonstrated to out-perform other manufacturer’s products at equivalent line sizes. Customer testing has proven 4806 capable of handling 17 KW at 13.56 MHz for semiconductor and EMC testing and other high power commercial and military applications.

www.iw-microwave.com

Integra Technologies
GaN/SiC RF Power Transistor

Integra Technologies

Integra Technologies Inc. (booth 1207) announced its latest GaN/SiC RF power transistor, the IGN1214CW425. Designed using Integra’s patented Thermally Enhanced GaN/SiC Technology, the IGN1214CW425 operates instantaneously from 1.2 to 1.4 GHz delivering 400 W CW at 40 V drain with >15 dB of power gain at 70 percent efficiency under CW operating conditions. This product sets a new industry benchmark for CW efficiency and performance, enabling the next generation of multi-mode radar performance.

www.integratech.com

JQL Technologies Corp.
Surface Mount IsoIator/Circulator

JQL Technologies Corp.

JQL has developed the smallest surface mount isolator/circulator for 5G application. Their 7 mm package is the best choice for 3.5 and 4.9 GHz bands with robust RF performance. For higher frequency, JQL offers true surface mount microstrip isolators/circulators with no need of any additional biased steel plate for installation. The new solution covers S, C, X, K, Ku and Ka-bands. JQL’s smallest 5.2 mm package for X-band delivers 250 W power handling.

www.jqlelectronics.com

K&L Microwave
Bandreject Filter

K&L Microwave

K&L Microwave’s D5CTN-4000/6000-100MHz-O/O-MQI is a digitally controlled tunable bandreject filter with a tuning range of 4 to 6 GHz. The novel design approach extends the passband significantly below the tuning range achieving 3 to 6 GHz as a passband with 1.5 dB max insertion loss. With five resonant sections selectivity reaches a 100 MHz, 40 dB bandwidth. Convenient USB control and a +12 VDC supply power make this bandreject filter an excellent option for lab testing environments.

www.klmicrowave.com

KRYTAR
Ultra-Broadband mmWave/Microwave/RF Components

KRYTAR

KRYTAR specializes in the manufacture of ultra-broadband mmWave, microwave and RF components and test equipment for commercial and military applications. The product line includes directional couplers, directional detectors, 3 dB hybrids, MLDD power dividers/combiners. Products cover DC to 110 GHz offering solutions for many applications including warfare (EW) systems and commercial wireless applications including mmWave, 5G, SATCOM, radar, signal monitoring and measurement, antenna beam forming and EMC testing environments. KRYTAR’s new dual-directional coupler, model 510050010, exhibits excellent coupling over the 10 to 50 GHz frequency (X through Q-bands).

www.krytar.com

LadyBug Technologies
True-RMS Power Sensor

LadyBug Technologies

LadyBug’s fully self-contained, thermally stable LB5944A True-RMS power sensor. The power sensor offers 44 GHz frequency coverage and an 86 dB dynamic range and is fitted with a 2.4 mm male connector. Optional autonomous mode with non-volatile storage for over 50 million measurements is available. Once setup, the sensor only requires power to make and store accurate NIST traceable measurements with no power meter or computer. Ask for a demonstration of the company’s exclusive Unattended Operation (Option UOP) feature at IMS2020.

www.ladybug-tech.com

Logus Microwave
WR10 Ultra-Light Waveguide Switch

Logus Microwave

The LOGUS WR10 Ultra-Light Waveguide Switch operates across the 75 to 110 GHz band and boasts a maximum VSWR of 1.20:1, insertion loss of 0.40 dB maximum and a minimum isolation of 50 dB. The switching time is 50 ms maximum and it is available with indicators, TTL interface control and three or four port configurations. The Ultra-Light Series from Logus can be an airborne application constructed and is also available from WR10 thru WR112 and Double-Ridge WRD180 through WRD750.

www.logus.com

LPKF Laser & Electronics
ProtoMat S64

LPKF Laser & Electronics

The allrounder in printed circuit board processing. Suitable for almost all in-house prototyping applications. The high speed of the low-maintenance milling spindle guarantees the production of fine structures down to 100 μm and allows the production of multilayers. The extensive equipment, including dispenser and vacuum table, makes the LPKF ProtoMat S64 the perfect addition to any development environment.

www.lpkfusa.com

MCV Microwave
mmWave Ceramic Filters 30 to 70 GHz

MCV Microwave

MCV Microwave is now offering mmWave filters to 5G communications, satellite internet/network services, space, aerospace, defense and military industries. These miniature surface mount bandpass filters exhibit excellent passband insertion loss and rejection. A typical 29 GHz filter has less than 2 dB insertion loss and over 15 percent bandwidth with 20 to 30 dB near band rejection.

www.mcv-microwave.com

Micable Electronic Technology Co. Inc.
High Accuracy Butler Matrices

Micable Electronic Technology Co. Inc.

SA-6-51 and SA-6-52 is 2.4 to 7.1 GHz 4 × 4 and 8 × 8 butler matrix respectively. SA-6-51 has insertion loss 7.8 dB max, VSWR 1.5:1 max, isolation 13 dB min, rating input power 5 W CW, phase accuracy ± 4° at 2.4 to 2.5 GHz, ± 5° at 5.18 to 5.83 GHz, ± 6° at 5.9 to 7.1 GHz, amplitude balance ± 0.7 dB max, size 101.6 × 106.7 × 16.5 mm, weight 410 g. SA-6-52 has insertion loss 11.8 dB max, VSWR 1.55:1 max, isolation 12 dB min, rating input power 5 W CW, phase accuracy ± 8° at 2.4 to 2.5 GHz, ± 10° at 5.18 to 5.83 GHz, ± 12° at 5.9 to 7.1 GHz, amplitude balance ± 0.9 dB max, size 205.7 × 205.7 × 16.5 mm, weight 1375 g.

Ultra-Wideband Two Way Power Divider/Combiner

Micable Electronic Technology Co. Inc.

Model P02N005500 is two way 0.5 to 50 GHz DC pass through power divider/combiner, it has 4.2 dB max insertion loss, 16 dB min isolation, 1.7:1 max VSWR, ± 0.4 dB amplitude balance and ± 6 ° phase balance. The input power as the power divider is 20 W average. As a combiner, it can stand for 5 W average input power. The size is 149.2 × 26.4 × 12.7 mm (5.87 × 1.03 × 0.50 in.), weight is 150 g max and the operating temperature is -54° to +85°C.

www.en.micable.cn

MICIAN
μWave Wizard

MICIAN

Mician’s μWave Wizard products are powerful tools for synthesis, analysis and optimization of microwave assemblies. The software’s hybrid EM solver guarantees fast and accurate simulation of passive components, feed networks and antennas. Typical applications include horn and reflector antennas, feed clusters, OMTs, polarizers, circulators, waveguide and combline filters, multiplexers, couplers and more. Integrated COM/VBA interfaces support external control and third-party add-ons. A new add-on feature for μWave Wizard is Mician’s Filter Workbench, a novel synthesis tool for the design of Chebyshev and quasi-elliptic function filters.

www.mician.com

Micro Lambda Wireless
Single Slot PXI Frequency Synthesizer

Micro Lambda Wireless

The MLMS-Series frequency synthesizer is a new smaller and lower cost frequency synthesizer designed to fit into a single slot PXI chassis. Dimensions measure 2.5” x 2.5” x 0.65” tall. Standard frequency models are available covering 250 MHz to 6 GHz, 2 to 8 GHz, 6 to 13 GHz and 8 to 20 GHz. Applications include wide band receivers, automated test systems, telecom, satcom, UAV’s and drones, as well as a variety of military and commercial test applications.

www.microlambdawireless.com

Millibox Silicon Solutions
3D DUT Positioner

Milliwave Silicon Solutions

The MilliBox GIMO1 Positioner is a cost effective test tool specially designed for mmWave over-the-air (OTA) measurements. Features include ± 180 degree horizontal and ± 180 vertical, better than 1-degree resolution, 11 cm DUT maximum width, 0.5 kg maximum DUT weight, 75 deg/sec rotational velocity, laser guided alignment, tangle-free wiring, open software controller interface over USB and is the best for device and module characterization. MilliBox products are cost effective test tools and accessories specially designed for mmWave OTA measurements.

www.millibox.org



Mini-Circuits
Four-Way Divider

Mini-Circuits

Mini-Circuits’ model ZC4PD-V1854+ is a four-way, 0-deg. power splitter/combiner with broad frequency range of 18 to 50 GHz. The 50 Ω DC-pass splitter/combiner handles as much as 16 W input power as a power divider with low insertion loss and excellent amplitude and phase unbalance. The typical insertion loss (above the 6 dB power split) is 1.1 dB from 18 to 40 GHz and 1.6 dB from 40 to 50 GHz with typical isolation of 29 dB from 18 to 40 GHz and 30 dB from 40 to 50 GHz.

MMIC Transformer

Mini-Circuits

Mini-Circuits’ model MTY2-243-D+ is a miniature GaAs MMIC 2:1 impedance transformer for use from 10 to 24 GHz. Supplied in die form, the 50 Ω balun transformer is fabricated by heterojunction-bipolar-transistor (HBT) process. It handles as much as 1.25 W (+31 dBm) input power with low insertion loss and minimal amplitude and phase unbalance. The typical insertion loss is 1 dB from 10 to 20 GHz and 1.3 dB from 20 to 24 GHz.

Tiny LTCC Filter

Mini-Circuits

Mini-Circuits’ model LFCW-6000+ is a low-temperature-cofired-ceramic (LTCC) lowpass filter (LPF) with passband from DC to 6 GHz. The typical passband insertion loss is 1.6 dB, with typical passband VSWR of 1.50:1. The stopband rejection is typically 42 dB or more from 8.2 to 14 GHz, typically 35 dB from 14 to 18 GHz, and typically 15 dB from 18 to 26.5 GHz. The stopband VSWR is typically 20.0:1 from 8.2 to 26.5 GHz.

SPDT Switch Die

Mini-Circuits

Mini-Circuits’ model M3SWA-250DRBD+ is a GaAs MMIC single-pole, double-throw (SPDT) absorptive switch die with internal driver for DC to 4.5 GHz. Well suited for communications, defense and test applications, the tiny switch features typical “on” time (from 50 percent control to 90 percent RF) of 14.4 ns and typical “off” time (from 50 percent control to 10 percent RF) of 11.3 ns; rise and fall times are typically 4.6 ns. Insertion loss is typically 1.4 dB or better across the full frequency range.

LTCC Bandpass Filter

Mini-Circuits

Mini-Circuits’ model BFCN-1052+ is a LTCC bandpass filter (BPF) with passband from 9.70 to 11.95 GHz. Passband insertion loss is typically 1.6 dB with typical passband VSWR of 1.90:1. The lower stopband extends from DC to 8.4 GHz, with typical rejection of 38 dB from DC to 8.1 GHz and 32 dB from 8.1 to 8.4 GHz. The upper stopband spans 14 to 44 GHz, with typical rejection of 28 dB from 14 to 28.5 GHz and 25 dB from 28.5 to 44 GHz.

Absorptive Attenuator Die

Mini-Circuits

Mini-Circuits’ KAT-1-D+ series of attenuator die includes models with fixed values of 0 to 10 dB in 1 dB steps as well as attenuation values of 12, 15, 20 and 30 dB for wideband applications from DC to 43.5 GHz. Well suited for mmWave applications including in 5G cellular wireless communications circuits and systems, the RoHS-compliant attenuator dice feature a contiguous ground plane for ease of installation. The typical VSWR is 1.10:1 from DC to 26.5 GHz and 1.30:1 from 26.5 to 43.5 GHz.

Monolithic Amplifier Die

Mini-Circuits

Mini-Circuits’ model PHA-83W-D+ is a high-dynamic-range monolithic amplifier die for wideband 50 Ω applications from 50 MHz to 8 GHz. Based on GaAs pseudomorphic high electron mobility transistor semiconductor technology, the RoHS-compliant amplifier delivers typical small-signal gain of 15.7 dB that is flat within ± 1.4 dB across the frequency range. The high dynamic range is marked by a typical output third-order intercept point of +35.5 dBm and typical output power at 1 dB compression of +23.3 dBm.

Hand-Formable Cable

Mini-Circuits

Model 141-7SBSM+ is a 7 in. long cable assembly based on Mini-Circuits’ Hand-Flex coaxial cable. It is hand formable without special tools and an ideal replacement for custom-bent 0.141 in. diameter semi-rigid cable assemblies in 50 Ω applications from DC to 18 GHz. It features an SMA male connector (with anti-torque nut) at one end and SMA female bulkhead connector at the other end. The RoHS-compliant cable has a minimum bend radius of 8 mm for tight fits.

RF Transfer Switch Matrix

Mini-Circuits

Mini-Circuits’ model RC-3MTS-18 is a broadband switch matrix consisting of three independently controlled electro-mechanical transfer switches, each covering DC to 18 GHz. It can be operated under USB or Ethernet control and is rated for 10 million switch cycles. It handles 10 W typical power with 0.25 dB or less typical insertion loss. Typical isolation is 76 dB or more from DC to 18 GHz with 25 ns typical switching speed. Typical VSWR is 1.15:1 or better.

Highpass Filter

Mini-Circuits

Mini-Circuits’ model ZHSS-K11G+ is a suspended substrate stripline filter with high-rejection stopband of DC to 8.5 GHz, transition band of 8.5 to 11 GHz, and low-loss passband of 11 to 40 GHz. The RoHS-compliant coaxial filter achieves typical stopband rejection of 80 dB from DC to 6.5 GHz and 60 dB from 6.5 to 8.5 GHz for effective separation of signals below 8.5 GHz from higher microwave and mmWave signals through 40 GHz, such as in satellite communications and 5G wireless communications systems.

www.minicircuits.com

Modelithics
COMPLETE LibraryTM

Modelithics

Modelithics® COMPLETE Library reaches a milestone with over 18,000 passive and active components for more than 750 scalable simulation models from nearly 70 vendors. COMPLETE Library is an indispensable collection of highly scalable models for capacitor, inductor and resistor families as well as non-linear diodes and transistors and system level components. All models are highly accurate and well documented. Compatible with six popular EDA tools. Free trials available, including vendor sponsored trial libraries.

www.Modelithics.com

Morion Inc.
Ultra-Stable 10 MHz OCXO

Morion Inc.

Ultra-Stable 10 MHz OCXO: MV336M Type Morion’s MV336M is an ultra precision 10 MHz OCXO with phase noise of <-93 dBc/Hz at 0.1 Hz and -120 dBc/Hz at 1 Hz. Short-term stability (ADEV) is <1E-13 at 1 second and <3E-13 until 100 sec which is accompanied by temperature stability of <4E-11 vs. -10…+70 deg C. The MV336M is housed in a 92 x 80 x 50 mm package and operates at 12 V.

www.morion-us.com

Networks International Corp.
Thin Film Filters

Networks International Corp.

Network International’s engineering expertise in hi-reliability RF products and integrated assemblies includes a specialty in Thin film filters that span from 1 to 20 GHz. These high performance filters are built on industry standard substrates such as alumina and titanate, offering a compact package size with low profile of < 0.08 in. The filters also offer high selectivity and out of band rejection of > 60 dB. These filters can be customized to meet passband requirements from 1 to 60 percent and meet a wide range of environmental requirements as well.

www.nickc.com

Noisecom
Programmable Noise Generator

Noisecom

The new RFX7000B programmable noise generator can generate complex, custom noise signals up to 40 GHz in a single, 1U rackmountable form factor. Built on the technology of the popular Noisecom UFX7000A benchtop platform, the RFX7000B delivers the performance and capabilities system designers and engineers to stress test wireless/5G, military and satellite communication systems. This new 1U form factor makes it easier than ever before to add customizable RF and microwave noise generation to a communications or ATE system.

www.noisecom.com

Passive Plus Inc.
RF/Microwave Passive Components

Passive Plus Inc.

Passive Plus Inc. (PPI) High-Q/Low ESR capacitors are offered in multiple case sizes, dielectrics and various terminations and include RoHS compliant and non-magnetic finishes. Data sheets and S-parameters are available. PPI specializes in High-Q,
low ESR/ESL capacitors, broadband capacitors, single layer capacitors, non-magnetic resistors (high power and thin film) and trimmer capacitors.

www.passiveplus.com/hiqproducts.php

Pasternack
mmWave Waveguide Antennas

Pasternack

Pasternack has expanded its offering of mmWave waveguide antennas to address the growing number of 5G and other high-frequency applications. Pasternack’s line of mmWave waveguide antennas has added 54 new models and now covers broad operating frequency ranges from 1.7 to 220 GHz, provides nominal gain ranging from 0 to 40 dBi, and features a variety of different waveguide sizes.

Waveguide Shorts and Shims

Pasternack

Pasternack has just released a new line of waveguide shorts and shims that are ideal for use in satellite communication, radar, wireless communication and test and instrumentation applications. Pasternack’s new line of waveguide shorts and shims consists of 36 models available in waveguide sizes ranging from WR-430 to WR-10. This new line provides superior RF performance and is ideal for use in RF test and measurement applications.

www.pasternack.com

Pixus Technologies
Ruggedized Software Defined Radio

Pixus Technologies

Pixus Technologies will be featuring a rugged version of the Ettus Research (a National Instruments brand) x310 SDR. The Pixus RX310 is IP67 weatherproof in a rugged fanless enclosure. The solution is ideal for field testing and deployment for drone detection/takeover, wireless/wideband prototyping, SIG/INT, RADAR and other applications. The company will also be showing various OpenVPX chassis configurations geared for VITA 67 RF and SOSA/HOST applications. Visit the Pixus at booth 723.

www.pixustechnologies.com

Planar Monolithics Industries Inc.
Absorptive Switch

Planar Monolithics Industries Inc.

Planar Monolithics Industries Model Number: P16T-100M52G-100-T-DEC is a 0.1 to 52 GHz, SP16T absorptive switch. This model offers a typical insertion loss of 16 dB while maintaining a typical isolation of 70 dB. It operates at 20 dBm CW, 100 ns switching speed and is controlled with TTL logic. Power requirements are +12 VDC at 800 mA max, -12 VDC at 720 mA max. Other features include 2.4 mm connectors, nickel plated finish and 12.00” x 5.50” x 0.65” package size.

www.pmi-rf.com

Qorvo
High Performance GaN PA’s

Qorvo

Qorvo released the QPA261x GaN power amplifier family. These high performance GaN on SiC PAs are packaged in a 5 x 5 mm plastic QFN, with tight lattice spacing for phased array radars. The QPA2610 (8.5 to 10.5 GHz) has > 2 W of saturated output power and 23 dB of large-signal gain, 47 percent PAE. The QPA2611 (8 to 12 GHz) provides > 5 W of saturated output power, 26 dB of large-signal gain, 42 percent PAE. The QPA2612 (8 to 12 GHz) has > 12 W of saturated output power and 23 dB of large-signal gain and 40 percent PAE.

Broadband Driver Amplifier

Qorvo

The CMD305C4 is a broadband MMIC driver amplifier housed in a leadless 4 × 4 mm surface mount package. The CMD305C4 is ideally suited for EW and communications systems where small size and low power consumption are needed. The broadband device delivers 18.5 dB of gain and +21 dBm saturated output power at 23 percent PAE from a single 5 V supply. The CMD305C4 is a 50 ohm matched design eliminating the need for external DC blocks and RF port matching.

Broadband Low Noise Amplifier

Qorvo

The CMD316C3 is a broadband MMIC low noise amplifier housed in a leadless 3 x 3 mm surface mount package. The CMD316C3 is ideally suited for EW and communications systems where small size and low power consumption are needed. The broadband device delivers greater than 20 dB of gain with a corresponding output 1 dB compression point of +15 dBm and a noise figure of 2 dB. The CMD316C3 is a 50 ohm matched design eliminating the need for external DC blocks and RF port matching.

www.qorvo.com

Reactel Inc.
Filters, Multiplexers and Multifunction Assemblies

Reactel Inc.

Reactel will feature its full line of filters, multiplexers and multifunction assemblies covering up to 50 GHz at IMS2020. Supporting military, commercial, industrial, medical and research needs, Reactel can design a unit that is right for you. From small, lightweight units suitable for flight or portable systems to high power units capable of handling up to 25 kW, connectorized or surface mount, large or small quantities - their talented engineers can design a unit specifically for your application.

www.reactel.com

RelComm Technologies Inc.
Terminated Coaxial Relay

RelComm Technologies Inc.

RelComm Technologies provides a high performance 1P3T to 1P6T, 50 ohm, 2 W terminated coaxial relay configured with ‘SMA’ type connectors having excellent RF performance to 18 GHz. The relay measures 2.25” sq. x 2.00” tall and is fitted with a standard DE9P header for ease of wire up. Operating temperature range is -30° to +75°C. The relay is available in latching with auto re-set and failsafe configurations. Standard operating voltages of 12, 24 and 28 VDC. This product is fully RoHS compliant.

www.relcommtech.com

Remcom Inc.
XFdtd’s Superposition Simulation

Remcom Inc.

Designing high-frequency MIMO and 5G devices requires intensive, yet efficient, analysis. Beamforming applications increase complexity due to hundreds or even thousands of beam states that must be analyzed. XFdtd leverages the EM principle of superposition to quickly analyze port phase combinations with a single simulation and identifies the ones that maximize far zone coverage in each direction. As a result, the design workflow for MIMO beamforming array analysis is greatly simplified and streamlined. Visit Remcom’s booth for a demonstration of XFdtd’s new features!

www.remcom.com

RFHIC Corp.
Pulsed, GaN Solid-State Power Amplifier Module

RFHIC Corp.

RFHIC Corporation will showcase its latest 1.2 kW, L-Band GaN solid state power amplifier designed for various radar applications at IMS2020. The RRP131K0-10 delivers a high efficiency of 50 percent efficiency with a duty cycle up to 20 percent. The PA is fabricated with RFHIC’s groundbreaking GaN on SiC HEMT, providing high breakdown voltage and wide bandwidth. RFHIC’s RRP131K0-10, power amplifier delivers the industry’s leading SWaP-C (size, weight, power and costs), enabling next-generation development in the field of high-power radar solutions.

www.rfhic.com

RFMW
28 GHz Power Divider Goes SMT

RFMW

RFMW announced a portfolio of devices designed for mmWave 5G radio applications. Created by Knowles - DLI, the portfolio includes filters, broadband couplers and Wilkinson power dividers. Patented ceramic substrate materials exhibit excellent temperature stability and high K factor enabling off the shelf solutions with small size and high performance. For example, the 25 to 32 GHz PDW06984 power divider has maximum excess insertion loss of 0.7 dB while consuming just 2.5 mm of board space, ideal for ultra-compact phased array antenna applications.

www.rfmw.com



RFMW/Qorvo
22 GHz Bandwidth Distributed Amplifier

RFMW/Qorvo

RFMW announced design and sales support for a wide bandwidth, distributed amplifier from Qorvo (Custom MMIC). The CMD284P4, GaAs MMIC distributed amplifier is housed in a leadless, 4 × 4 mm plastic surface mount package for ease of installation. Operating from DC to 22 GHz and delivering 17 dB of gain, the device offers 19 dBm P1dB and noise figure of 2.5 dB at 10 GHz. Matched to 50 ohms, the CMD284P4 eliminates the need for external RF port matching.

www.rfmw.com

Richardson RFPD
Power Amplifier

Richardson RFPD

The CMPA2738060F is a 50 V GaN-on-SiC MMIC power amplifier covering the extended range S-Band radar band of 2.7 to 3.8 GHz. The two-stage PA offers 34 dB of gain and 60 W peak power over the entire band. The highly integrated PA includes two gain stages with internally matched 50 ohms input and output, which provides ease of use. The combination high power density, efficiency and reliability of GaN, with the high integration makes this a versatile option for compact phased array/AESA radar systems.

www.richardsonrfpd.com

RLC Electronics
Miniature SPDT Switch

RLC Electronics

RLC Electronics introduced an addition to their miniature SPDT switch product line. This switch is offered in a unique package with connectors in a “T” configuration for ease of connection/mating at the system level, and is a perfect drop-in replacement for pin diode switches. The switch is offered in both surface mount and connectorized versions and operates from DC to 18 GHz. Standard options available include indicators and TTL drivers. The switch measures 1” x 1” x 0.90”.

www.rlcelectronics.com

Roos Instruments
Cassini Spyder Modular ATE Platform

Roos Instruments

Move 5G test from the lab into production with the Cassini Spyder modular ATE platform. Combining production speed with a scalable instrument and device interface architecture, Spyder provides seamless multi-function test from DC to 100 GHz. Integrated instrument and device interface calibration software delivers VNA accuracy right to the device under test. Visit us at IMS2020.

www.roos.com

Rosenberger Hochfrequenztechnik GmbH & Co. KG
PIM Test Solutions for 5G Technology

Rosenberger Hochfrequenztechnik GmbH & Co. KG

Rosenberger develops and provides low-PIM components as well as PIM test solutions for 5G technologies. The portfolio includes new rack PIM analyzers for production/lab environments, portable desktop analyzers, PIM site analyzers for measurements on site, and band filter units for 600 MHz and 3,500 MHz measurements. The portable desktop analyzer offers high flexibility for measurements in production lines, R&D and test labs. Rosenberger rack analyzers are designed to make PIM tests in production or test lab environments as modular, precise and efficient as possible.

www.rosenberger.com

Samtec Inc.
50 GHz Microwave Cable Solution

Samtec Inc.

Samtec announced a new high-performance cable assembly with performance up to 50 GHz using both male and female 2.40 mm connectors. The RF23C Series uses cable manufactured in their Wilsonville, Ore. facility, which is a flexible low-loss alternative to RG405 semi-rigid cable. According to their on-line characterization report, 12 in. assemblies typically exhibit less than 1.3:1 VSWR and just over 2 dB of insertion loss up to 50 GHz.

www.samtec.com

Signal Hound
Spectrum Analyzers

Signal Hound

Signal Hound’s latest device, the SM200C, maintains the dynamic range, phase noise, 1 THz/s sweep speed, and 100 kHz to 20 GHz tuning range that made the SM200B so popular, but now includes a full 160 MHz IBW available for calibrated I/Q data streaming, plus device control via 10 GbE SFP+ connection. No longer limited by the length of a cable, the SM200C is perfect for secure environments where USB is prohibited.

www.signalhound.com

Signal Microwave
Edge Launch Drop-in Replacement Connector

Signal Microwave

Signal Microwave’s line of 2.92 mm, high performance, edge-launch connectors was designed for the thinner substrates being used today, typically between 5 and 10 mils thickness (0.127 to 0.254 mm) with dielectric constants from 3.0 to 3.5. Previously, high frequency board materials were around 30 mils thick, and the dielectric constants were lower, from 2.0 to 2.5. Signal Microwave can provide design support to optimize the interface on the board for best performance.

www.signalmicrowave.com

Skyworks
Front-End Module

Skyworks

Skyworks’ SKY66404-11 2.4 GHz front-end module (FEM) is designed for Zigbee®, Thread and Bluetooth® (including low energy) ultra-low power IoT applications. Featuring high-performance in a compact package, SKY66404-11 provides increased efficiency, and more than 4x range extension over previous models. This FEM is ideal for applications spanning sensors, beacons, smart meters and thermostats, wireless cameras, smoke and CO detectors, and wearables including medical devices.

www.skyworksinc.com

Southwest Microwave Inc.
Board-Launch Connectors

Southwest Microwave Inc.

Southwest Microwave offers high frequency vertical launch and end launch connectors that deliver unrivaled mechanical and electrical performance up to 110 GHz. For design assistance to ensure optimal connector performance, including printed circuit board layout and 3D models for mechanical layout, visit Southwest Microwave at IMS2020 booth 2329.

www.southwestmicrowave.com

Spacek Labs
High-Power Amplifier SP392-35-33

Spacek Labs

Spacek Labs’ solid-state, high-power amplifier, Model SP392-35-33, has excellent performance characteristics from 36 to 41 GHz. With a saturated output power greater than 33 dBm it is ideally suited for markets such as 5G. The unit has a nominal gain of 38 dB with VSWR less than 2:1 using 2.92 mm coaxial connectors. The amplifier requires a bias voltage of +8 VDC with 2.4A quiescent current and ~ 4A at 1 dB gain compression.

www.spaceklabs.com

SV Microwave
Waterproof Interconnects

SV Microwave

SV Microwave offers a wide range of IP67 and IP68 waterproof interconnect products designed to withstand rigorous environments and harsh elements. SV’s line of waterproof adapters include hermetically sealed connectors to 1 x 10 to 8, making them ideal for high pressure, vacuum applications and the prevention of liquid or gas leakage.

www.svmicrowave.com

Teledyne e2v
Microwave Data Converters

Teledyne e2v

Join us at IMS2020 to see Teledyne e2v’s demonstration of a recently announced microwave data converter enabling multi-band direct conversion up to Ka-Band and to see a demonstration of the company’s advanced data converter synchronization techniques allowing accurately synchronized sampling of microwave antenna arrays. The Teledyne e2v EV12DS480 is the world’s first K-Band capable DAC and it will be running a live demo displaying direct to Ka-band performance. Talk with Teledyne technical representatives about simplifying your microwave transmit systems using the EV12DS480.

www.teledyne-e2v.com

Times Microwave Systems
TLMP Connector

Times Microwave Systems

Harsh conditions demand a more rugged, durable design than the typical SMP/SMPM connectors. The Times Locking Miniature Push-On (TLMP) is ready to take on the challenge. TLMP connectors operate at up to 60 GHz. An interface O-ring provides a superb environmental seal. Designed with overlapping outer shields, the TLMP has improved electromagnetic interference (105 dB vs. 65 dB for similar), making it a durable, highly shielded alternative to SMP/SMPM designs.

www.timesmicrowave.com

Z-Communications
X-Band Surface Mount DRO

Z-Communications

The DRO11750A is a high performance dielectric resonator VCO operating in the X-band with exceptional phase noise performance. It is designed to cover 11.75 GHz within 0 to 12 V of tuning and provides -104 dBc/Hz phase noise at 10 kHz offset. It operates off a 5 VDC supply while consuming 23 mA and delivers 0± 3 dBm over -40°to 85°C. The DRO11750A can integrate into any radar system. Call Z-Communications to learn how this DRO can fit into your next project.

www.zcomm.com