Miniaturized ‘pin-style’ devices are offered in square or round packages with forward power handling of 500 W and reverse power handling of 20 or 30 W depending on the package.

The QPA1724 provides 20 W of saturated power from 17.3 to 21.2 GHz for radar applications in both commercial and military markets.

The R199205SMUA10CR  delivers -117 dBc/Hz typical phase noise at 10 KHz offset at its operating range of 1990 to 2050 MHz.

The MB.106.0G404050 incorporates advanced, state-of-the-art, GaN on SiC technology to deliver 10 Watts of saturated power from 100 to 6000 MHz with a P1dB of 5 W. 

The QPF4506B integrates a 5 GHz power amplifier, regulator, single pole two throw switch, bypassable low noise amplifier and coupler into a single device for Wi-Fi 802.11ax systems. 

The ASC2979C has a operating band of 1700 to 5900 MHz with +12 dBm P1dB typical, 25 dB gain typical, and a 3.0 dB typical noise figure while operating at 28 V.

The 1001-262 handles 50 W of RF energy over a frequency span of 902 to 928 MHz. 

Qorvo’s Spatium™ QPB3238N is a solid-state, spatial-combining amplifier with an operating range of 32 to 38 GHz. 

The ASC3065C has an operating band of 20 to 500 MHz with typical specifications of +33 dBm P1dB, 34 dB gain and a 3.0 dB noise figure when operating at 24 V. 

The REMC02G06GE delivers up to 57.7 dBm of saturated power output over a range of 2 to 6 GHz with 70 dB of small signal gain. 

 The Qorvo QPF4516B features +27 dBm MCS0 for 802.11ax wireless access points.

The MDPX-0305 is a broadband passive MMIC diplexer, a combination high pass and loss pass filter, capable of multiplexing low frequency DC to 3 GHz and high frequency 5 to 26.5 GHz signals. 

The F6521S is an 8-channel transmit, active beamforming RFIC designed for applications in Ku-Band (13.75 to 14.5 GHz) satcom planar phased array antennas. 

The ASC3064C has an operating band of 2400 to 2600 MHz with typical specifications of +18 dBm P1dB, 50 dB gain and a 1.5 dB noise figure when operating at 15 V.

The MB.406.0G363228 incorporates advanced, state-of-the-art, GaN on SiC technology to deliver 4 Watts of saturated power from 400 to 6000 MHz with a P1dB of 2 W.

Qorvo’s Spatium™ QPB2731N is a solid-state, spatial-combining amplifier with an operating range of 27 to 31 GHz.

The MwT-9F70 GaAs MESFET delivers 26.5 dBm P1dB at 12 GHz and is ideally suited to applications requiring high gain and medium linear power in the 500 MHz to 26 GHz frequency range.

The R1950SMUA5CR CRO delivers -125 dBc/Hz typical phase noise at 10 KHz offset at its operating range of 1950 MHz.

The QPD2025D is designed using Qorvo’s proven standard 0.25 um power pHEMT production process. 

The 1001-342 delivers wideband performance for commercial, military and federal law enforcement bands from 1.35 to 2.5 GHz with 2.4 dB omni-directional gain. 

The QPA1009 delivers an Industry leading 16 W of saturated power from 10.7 to 12.7 GHz for X-Band satellite communications, radar and point-to-point communications systems. 

The APM-7516 is a robust broadband distributed, low phase noise LO driver amplifier designed to provide greater than +20 dBm output power with excellent return losses and high input power handling.

The REMC26G40GD delivers up to 45 dBm of continuous wave saturated output power over a range of 26.5 to 40 GHz with 50 dB of gain.

The QPD1028L delivers > 750 W of saturated power from 1.2 to 1.4 GHz for military and civilian L-Band radar systems.

Capable of handling up to 30 W of average power with an operating temperature of -55°C to +85°C, the 816-2-4.250-M01 RF power divider offers phase and amplitude balance generally seen only in narrow band models.

SiTime XCalibur™ active resonators are designed to replace four-pin SMD crystal resonators in demanding applications such as automotive, industrial and enterprise equipment. 

The QPA1008 is a two-stage variable gain amplifier for S-Band applications from 2.7 to 3.8 GHz.

The F6522 is an eight-channel transmit active beamforming RFIC designed for application in Ka-Band satcom planar phased array antennas from 27.5 to 31 GHz. 

The MB030512M565028 incorporates advanced, state-of-the-art LDMOS technology to deliver 350 Watts of saturated power from 30 to 512 MHz.

The QPC2511 is a SP3T switch specifically designed for S- and X-Band transmission linear power handling with a frequency range of 2 to 11 GHz. 

The ASC3086C has an operating band of 2 to 250 MHz with typical specifications of +35 dBm P1dB, 22 dB gain and 2.7 dB noise figure. 

The REMC08G11GE delivers up to 55 dBm of saturated power output over a range of 8 to 11 GHz with 56 dB of gain.

The San-tron portfolio is comprised of field replaceable connectors capable of accepting 0.009”, 0.012” and 0.020” diameter launch pins with 1/2” square, 3/8” square or .625” two-hole flange configurations.

The CMD328 covers 6 to 18 GHz with over 27 dB of gain and 1.25 dB noise figure. 

The ART150FEU, LDMOS power transistor provides 150 W of pulsed or CW RF energy for ISM applications ranging from 1 to 650 MHz. 

The F6513S is an 8-channel, transmit, active beamforming, RFIC designed for application in Ku-Band planar phased array antennas for communications or radar applications.

The QPA1003D operates from 1 to 8 GHz and typically provides 10 W saturated output power with power-added efficiency of 30 percent and large-signal gain of 25 dB. 

The MB1.08.0G404828 incorporates advanced, state-of-the-art, GaN on SiC technology to deliver 10 W of saturated power from 1.0 to 8.0 GHz with a P1dB of 4 W. 

The CLF3H0035-100U is a 100 W, unmatched, broadband, GaN-SiC HEMT transistor usable for both CW and pulsed, general purpose applications in frequency ranges from DC to 3.5 GHz.

The Qorvo QPF4288A features +22 dBm MCS11 HE40 -43 dB dynamic EVM and +27 dBm MC20 VHT20 spectral mask compliance for wireless access points. 

The CMX90G301 is a low-power, 50 Ω cascadable MMIC gain block for 1.4 to 7.1 GHz applications. +1 dB of positive gain-slope across the band eliminates the need for equalization and compensates for increasing system losses with frequency.

The CLF3H0060-30U is a 30 W, unmatched, broadband, GaN-SiC HEMT transistor usable for both CW and pulsed, general purpose applications in frequency ranges from DC to 6.0 GHz.

The Qorvo QPM2100, GaAs MMIC front-end module, is designed for 2.5 to 4.0 GHz radar and combines a T/R switch, LNA with digital attenuator and PA.

The SiT5156 series oscillators deliver ±0.5 to ±2.5 ppm stability performance and can be factory-programmed to any combination of frequency (from 1 to 60 MHz), voltage and pull range.

The ART35FE, LDMOS power transistor provides 35 W of pulsed or CW RF energy for ISM applications ranging from 1 to 650 MHz

The Qorvo QPL1816, single-ended LNA, balances low noise and distortion to provide an ideal solution for a wide range of broadband amplifiers used in Cable TV applications such as optical receivers and low noise front-ends.

The QPQ1298 is a compact, bulk-acoustic wave bandpass filter with 2595 MHz center frequency and 160 MHz bandwidth for Sub-Band 41 uplink/downlink applications. 

The Qorvo QPF4216B FEM delivers higher power and better throughput in Wi-Fi 802.11ax systems than competing devices.

The 1001-216 omni-directional antenna operates from 1000 to 1500 MHz with a peak gain of 2.15 dBi. 

The PSF29B02V2S interdigital filter has a pass band of 27.5 to 30.0 GHz with 50 Ω characteristic impedance.

The Qorvo QPF4216 FEM is an energy efficient, high capacity device with a compact form factor for 802.11n-ax Wi-Fi systems needing minimal layout area.

The MwT-PH8F AlGaAs/InGaAs pHEMT delivers 30 dBm Psat at 12 GHz and is ideally suited to applications requiring high-gain and medium linear power up to 18 GHz.

Southwest Antennas’ monopole whip antenna, the 1000-048, covers military and federal law enforcement bands from 1.81 to 1.85 GHz with 0.8 dBi gain.

The Qorvo QPL1810, is used to support fiber to the home applications from 50 to 1800 MHz using a single 5 V supply, or it can be used from 5 to 8 V depending on linearity requirements.

The PSF71B07W interdigital filter has a pass band of 69.0 to 76.0 GHz with 50 Ω characteristic impedance. 

The ASC523 has an operating band of 2 to 250 MHz with typical specifications of +35 dBm P1dB, 22 dB gain and 2.8 dB noise figure.

The QPC1006 SP3T offers > 30 dB isolation and < 1 dB insertion loss in 0.15 to 2.8 GHz applications such as radar, electronic warfare and test instrumentation. 

The MwT-9F GaAs MESFET delivers 26.5 dBm P1dB at 12 GHz and is ideally suited to applications requiring high-gain and medium linear power in the 500 MHz to 26 GHz frequency range.

The 1027-035 rugged, high performance Iridium and GPS L1 antenna supports Iridium transmission and reception for worldwide voice and data communication along with receive only L1 GPS position and timing services.

The QPX0003D, 30 to 40 GHz I/Q Mixer can be configured as an image reject mixer, a single sideband upconverter or a QPSK modulator/demodulator. 

 The KSCA-UWBS86A linear polarized, UWB chip antenna is designed to offer high efficiency in channels 1 through 7, making it ideal for end-use products targeting markets in the U.S., Europe and parts of Asia

The SKY68031-11 is the industry’s smallest, multi-band RF front-end module for licensed, low-power, wide-area network  applications.

The QPQ4900 is a compact, bulk-acoustic wave (BAW) bandpass filter with 4920 MHz center frequency and 160 MHz bandwidth

The Unictron MT4B-AC-BL03 is a 2-in-1 LTE/GNSS combination featuring a single LTE antenna covering 698 to 2690 MHz and an active GNSS antenna covering GPS, BEIDOU and GLONASS L1 bands.

The MwT-7F GaAs MESFET delivers 21 dBm P1dB at 12 GHz and is ideally suited to applications requiring high-gain and medium linear power in the 500 MHz to 26 GHz frequency range.

The QPD0005M GaN power transistor supports driver amplifier applications for massive MIMO Doherty configurations from 2.5 to 5 GHz.

The 1000-046 omni-directional antenna operates from 330 to 360 MHz with a peak gain of 2.0 dBi, features a tough, braided aircraft wire element with a sealed heat shrink exterior and fully potted.

The SEWB2593B194SB Ceramic Waveguide filter supports 10 W average power with high peak power performance suitable for LTE transmissions. 

Temperature compensated SAW filter technology allows the Qorvo QPQ1061 filter to deliver superior temperature stabilized performance.

 The R1150SMUA5CR delivers -128 dBc/Hz typical phase noise at 10 KHz offset at its operating range of 1150 MHz. 

Cubic Nuvotronics' PSF29B02S interdigital filter has a passband of 27.5 to 30.0 GHz with 50 Ω characteristic impedance.

The Qorvo QPP0100 VPIN limiter provides flat leakage of 21 dBm with up to 100 W peak pulsed power handling from 8 to 11.5 GHz.

Targeting 2400 to 2500 MHz 802.11n/ac applications in automotive infotainment and telematics, the SKYA21040 integrates a single-pole, triple-throw switch and LNA with a bypass mode in an ultra-compact package. 

The Qorvo QPA9122M provides 36.5 dB gain at 2.6 GHz and achieves a peak power of 27 dBm P3dB. 

The SKYA21038 is a single-pole, double-throw (SPDT) switch intended for mode switching in WLAN applications ranging from 0.9 to 6 GHz.

The Qorvo QPA2211T GaN power amplifier supports satellite communications and 5G infrastructure in the 27.5 to 31 GHz frequency range. 

The R1000SMUB8CR delivers -131 dBc/Hz typical phase noise at 10 kHz offset at its operating frequency of 1000 MHz.

The 1001-259 half wave dipole operates from 1.4 to 1.6 GHz with a peak gain of 2.0 dBi.

The Qorvo QPC1220Q is a double-pole, four-throw (DP4T) switch designed for automotive transfer routing applications from 617 to 6000 MHz where highly linear, low-loss switching is  needed.

SiTime Endura SiT8944 oscillators are among the most reliable and highest quality oscillators for high reliability aerospace and defense applications.

The Cubic Nuvotronics' PSF85B08W interdigital filter has a pass band of 81.0 to 89.0 GHz with 50 Ω characteristic impedance. 

The Qorvo QPQ1029 exhibits low loss in B1/B3 uplink applications and high out-of-band attenuation of unwanted signals (> 40 dB).

The A3M39TL039 is a 28 V, 50 ohm matched integrated Doherty LDMOS Multi-Chip Module covering the cellular infrastructure bands between 3700 to 3980 MHz.

The DCAH0S17 is a high efficiency antenna designed to cover both the traditional 2.4 GHz Wi-Fi band and the entire Wi-Fi 6 and 6E bands from UNII 1 to UNII 8. 

The QPD0011 is an asymmetric, dual-path, discrete GaN on SiC HEMT in a DFN package operating from 3.4 to 3.6 GHz. 

The TSX series chip attenuators span DC to 50 GHz with 1 to 3 W of input power handling capability based on individual device attenuation values.

The BTS6201U amplifier delivers high linearity with 27 dBm typical P1dB output power in its frequency range of 2300 to 4200 MHz. 

The QPC4614 is a 75 Ω, 6-bit, digital step attenuator that features high linearity over the entire 31.5 dB gain control range in 0.5 dB steps. 

The 1055-404 is directional MIMO sector antenna has three, N-Type female RF ports, each feeding its own discrete antenna element, with two elements operating at 1.7 to 2.5 GHz, and the third port operating at 1.35 to 1.9 GHz.

Ideal for protecting sensitive components and for applications requiring high linearity, Marki’s HLM-40PSM, GaAs, Schottky diode, signal limiter provides 11 to 19 dBm flat leakage with low insertion loss and low return loss from DC through Ka-Band.

The Qorvo CMD235 is a broadband MMIC SP5T switch in die form covering DC to 18 GHz with low insertion loss of 2.2 dB and high isolation of 30 to 50 dB (depending on port) at 10 GHz.

The Cirocomm Corporation GGWA-600 multirole antenna combines five individual elements to cover vehicle mounted deployment needs including Wi-Fi, LTE, 5G, GNSS and DSRC. 

Cubic Nuvotronics' PSF26B04S interdigital filter has a pass band of 24.5 to 28.3 GHz with 50 Ω characteristic impedance.

The QPD0010 is an asymmetric, dual-path, discrete GaN on SiC HEMT in a DFN package operating from 2.5 to 2.7 GHz.

The APA Wireless R1424SMUAM12_135 delivers -95 dBc/Hz typical phase noise at 10 KHz offset over its operating range of 1400 to 2400 MHz. 

The Qorvo QPL1000 covers 8 to 11 GHz with 27 dB small signal gain and 1.7 dB noise figure.

The QPF4006 MMIC mmWave FEM operates from 37.0 to 40.5 GHz with integrated LNA+TR SW+PA.

APA Wireless's R2450SMUA8CR delivers -120 dBc/Hz typical phase noise at 10 KHz offset at its operating range of 2,450 MHz.

Marki Microwave's new MMIQ-1040 IQ mixers provide exceptional sideband suppression and L-to-R isolation over an RF/LO bandwidth of 10 to 40 GHz, while offering high linearity performance.

The QPM1017 power amplifier offers 100 W of pSat RF power from 5.7 to 7 GHz in a 19 x 19 mm bolt down, copper base package for superior thermal management. 

The SiT5008 TCXO offers ±2 ppm stability and low-power consumption in a small industry-standard package that is pin-compatible with traditional quartz TCXOs, enabling 100 percent drop-in replacement without redesign or layout changes. 

The CMX90A003 and CMX90A004 are two-stage, fully matched MMIC PAs for use in 860 to 960 MHz, license-free bands with high efficiency (49 percent PAE) and gain (30 dB). 

QPF4550 integrates a 5 GHz PA, single pole two throw switch  and bypassable low noise amplifier into a single device. 

The PSF42B04S interdigital filter has a pass band of 40 to 44 GHz with 50 Ω characteristic impedance. Handling a maximum input power of 2 Watts, this SMT filters’ insertion loss is < 2.2 dB and boasts > 30 dB upper and lower bandpass rejection.

The SiT5356 series oscillators deliver ±100 ppb stability performance and can be factory-programmed to any combination of frequency (from 1 to 60 MHz), voltage and pull range.

The R1920SMUA5CR  delivers -121 dBc/Hz typical phase noise at 10 KHz offset at its operating range of 1920 MHz.

MT3A-0113HPA delivers exceptional IMD suppression with low conversion loss and high IP3, RF and LO input frequencies. 

The Qorvo QPA2309 power amplifier offers 100 W of pSat RF power from 5 to 6 GHz in a small 7 x 7 mm QFN package. 

The 40AH-03 is a 2.92 mm male to 2.92 mm female attenuator with 3 dB nominal attenuation from DC to 40 GHz.

The KA113 is a GaAs pHEMT broadband low noise amplifier with high linearity in a 3 x 3 mm hermetic surface-mount technology package for harsh environments. 

The BAWplexer enables single antenna implementation combining both 2.4 GHz and 5 to 7 GHz Wi-Fi applications for simultaneous usage of Wi-Fi and LTE signals without interference.

The Qorvo QPA3358 provides 34 dB of flat gain and low noise of 4 dB for DOCSIS 3.1 amplifiers and broadband CATV hybrid modules from 47 to 1,218 MHz.

The R2000_1SMUA6CR delivers -122 dBc/Hz typical phase noise at 10 KHz offset at its operating range of 2000 MHz.

The QPD1029L power transistor offers 1500 Watts of RF power from 1.2 to 1.4 GHz in an air-cavity ceramic package.

The Qorvo QPC7334 equalizer supports CATV amplifier and transmission systems from 5 to 700 MHz with a 20 dB slope range.

Providing linear power spanning 8 to 11 GHz, the MP8.0011G504828 from Elite RF delivers 100 W  Psat with 52 dB of gain.

MSW6T-6000-600 is a single-pole, six-throw switch capable of handling 200 W of CW RF power over the range of 30 to 512 MHz.

The Sangshin MBP34R6667S1135B, high pass filter provides 1,135 MHz bandwidth centered at 6,667 MHz, offering a low cost, high performance solution.

 RNT7050 series offers best-in-class frequency stability of ±50 ppb for 5G and other telecommunication applications. Available in a 7 x 5 mm footprint.

The QPF4010 MMIC mmWave FEM operates from 24.25 to 27.5 GHz with integrated LNA+TR SW+PA. 

Skyworks Solutions' power amplifiers are designed for the stringent requirements of enterprise small cell radios and offer wide instantaneous bandwidth, with high gain and are fully input/output matched.

The Qorvo QPD1881L power transistor offers 400 W of RF power from 2.7 to 2.9 GHz in an air-cavity package.

F0452B consists of an RF switch and two gain stages with 6 dB of gain control supporting analog front-end receivers in active antenna system (AAS) from 2,300 to 2,700 MHz. 

The Sangshin MBP84RC2N3625S150D is a small form factor ceramic filter covering the full 3,550 to 3,700 MHz Citizens Broadband Radio Service (CBRS) radio band.

SiTime’s Si5721 digitally controlled OCXO offer’s ±5 to ±8 ppb stability at frequencies from 1 to 60 MHz.

With high gain, high linearity, and low distortion from 50 to 1800 MHz the Qorvo QPL1812 amplifier is ideal for broadband cable applications.

The 802-2-4.250 RF power divider/combiner offers two-way, in-phase performance from 0.5 to 8 GHz and capable of handling up to 30 W of average power with an operating temperature of -55 to +85°C.

QPQ6108 duplexer delivers superior temperature stabilized performance over a range of -20 to 95°C, capable of handling 29 dBm of downlink power (925 to 960 MHz).

 PSF28B04S interdigital filter has a pass band of 26.5 to 30 GHz with 50 Ω characteristic impedance, handling a maximum input power of 2 W.

QPF4551 offers a compact form factor with integrated matching, minimizing wireless access point layout area by integrating a 5 GHz power amplifier, single pole two throw switch and bypassable low noise amplifier into a single device.  

The PCA3060 series of fixed attenuators  optimized for radar, T/R modules, E/W, mmWave and 5G applications up to 30 GHz and can handle up to 1 W of power in an 0603 size package.

SKY66422-11 is specifically designed for LPWAN—supporting LoRa®, SigFox and other unlicensed band technologies—as well as high-power ISM applications in the 860 to 930 MHz frequency range.

The Qorvo QPC7335 equalizer supports CATV amplifier and transmission systems from 45 to 1000 MHz with a 20 dB slope range, with design and sales support from RFMW. 

The Ampleon BLM10D3438-70ABG is a three-stage, fully integrated Doherty MMIC solution for 3.4 to 3.8 GHz power amplifier designs, now supported by RFMW.

CMX940 is a low-power, high performance Fractional-N PLL with fully-integrated wideband VCOs and programmable output divider, generating RF signals over a continuous frequency range of 49 to 2040 MHz.

QPA2962 serves radar and EW applications from 2 to 20 GHz. Delivering 10 W of saturated output power with large signal gain of 13 dB.

SKYA21043 incorporates a 5 GHz single-pole, double-throw transmit/receive switch, a 5 GHz high-gain low-noise amplifier with bypass and a 5 GHz power amplifier intended for high-power 802.11p applications and systems. 

 The Qorvo QPA3070 amplifier offers 150 W (52 dBm) of saturated output power with power gain of 28 dB.

A10165 XBAW™ filter covers the entire 5945 to 7125 MHz, U-NII-5 to U-NII-8 bands, of the WiFi 6E unlicensed spectrum with 50 dB low side rejection and 30 dB high side rejection. 

QPA2212 from Qorvo, a high performance, mmWave power amplifier that offers10 W of linear power for wideband communications systems with < -25 dBc IMD3.

SKY66121-11, a high efficiency, high performance transmit/receive FEM providing greater than 4x range extension versus standalone systems-on-chip, with +30 dBm Pout at 169 to 170 MHz.

DLI, surface mount, high frequency, gain equalizer series. Offering a variety of nominal gain slope from 1 to 3.5 dB, all devices in the series are footprint interchangeable.

The QPA2575 high frequency power amplifier from Qorvo, offers 3 W of saturated power with small signal gain of 19 dB.

Each path of the Renesas F0453B consists of an RF switch and two gain stages with 6 dB of gain control. 

QPC7522 is a 75 ohm, SPDT switch operating from 5 to 3,300 MHz. Insertion loss ranges from 0.12 dB at lower frequencies to 0.7 dB at maximum frequency.

The VDES1000 VHF Data Exchange System Module from CML Microcircuits, a complete marine VHF data exchange system software defined radio solution.

SKYFR-001982 circulator delivers 200 W average and 400 W peak power handling for 1200 to 1400 MHz L-band radar systems and wireless applications. 

 P1CA-29M29M-SS085-1M-PM is a 1 meter long cable assembly terminated with 2.92 mm Male connectors and rated to 40 GHz.

QPA2212T offers 10 W of linear power for wideband communications systems with < -25 dBc IMD3 and operates from 27.5 to 31 GHz with 22 dB small signal gain.

The R1020SMUA12_135 delivers -103 dBc/Hz typical phase noise at 10 KHz offset over its operating range of 1,000 to 2,000 MHz. 

 The Qorvo QPD0007 is an unmatched, single-stage transistor offering up to 20 W of output power in frequency bands from DC to 5 GHz.

RFLM-802123QC-291, silicon, PIN-Diode limiter module offers both high power CW and peak power protection for X-Band applications (8.7 to 10.7 GHz).

QPA9901 power amplifier targets Band 66 along with Band 1 small-cell wireless infrastructure systems from 2,110 to 2,170 MHz.

SiTime’s SiT5358 series of MEMS Super-TCXOs deliver ±50 ppb stability performance and can be factory-programmed to any combination of frequency from 1 to 60 MHz.

The A10235 XBAW™ filter offers a small form factor and low pass band insertion loss for 5G, n78 band RF filtering applications. .

Part of a series, the Knowles FPC06075 spans 12 to 18 GHz and provides a 10 dB coupling factor for Ku-Band applications.

Family of ultra-linear GaAs pHEMT 75 Ohm RF balanced amplifier ICs with 5 to 1218 MHz operating bandwidth.

Renesas F2251, a high linearity attenuator that covers a broad frequency range from 50 to 6000 MHzcovers a broad frequency range from 50 to 6000 MHz for applications including base stations (3G, 4G, 5G), repeaters

SKY66320-11 power amplifier features wide instantaneous bandwidth with full input/output matching, high gain and high linearity.

R159186SMUA8CR delivers -108 dBc/Hz phase noise at 10 KHz offset over its operating range of 1,590 to 1,855 MHz.

The HMMC-5645 multiplies input frequencies from 10 to 20 GHz to provide 20 to 40 GHz output frequencies and is usable to 50 GHz.

The F0443, dual DVGA is a highly integrated 0.6 to 2.7 GHz device designed for use in diversity/MIMO receivers.

RFMW announced design and sales support for high performance power amplifier from Qorvo’s QGaN15 0.15 um GaN on SiC process.

RFMW support for the family of direct conversion receiver IC’s. The CMX994AQ4 direct conversion receiver IC serves zero IF, near-zero IF and low IF receivers.

RFMW announced support for a high efficiency, DPD enabled power amplifier from Skyworks Solutions featuring wide instantaneous bandwidth with full input/output matching.

RFMW announced a medium power driver amplifier from Qorvo’s QGaN15 0.15 um GaN on SiC process, the QPA2611.

The R3200SMUA8CR delivers -117 dBc/Hz phase noise at 10 KHz offset at its operating frequency of 3,200 MHz.

RFMW announced design and sales support for a high linearity, low-threshold, dual PIN limiter diode module, the Skyworks SKY16603-632LF. 

These precision in-series and between-series adapters are color coded to provide a critical visual indicator (Color Code) that promotes proper mating along with quick identification.

Ideal for ATE systems in the 0.3 to 6,000 MHz frequency range, the 4205A-95.5 offers 95.75 dB of attenuation in 0.25 dB steps.

RFMW announced design and sales support for a half-duplex, transmit/receive integrated circuit, the Renesas F5280 IC.

The BPF0910H9X600 LDMOS based pallet offers 600 W at 915 MHz. 

08K721-40MS3 connector is cost-effective yet designed to provide excellent return loss values for frequencies up to 70 GHz.

The P1AD-24M29F is a 2.4 mm Male to 2.92 mm Female adapter operating to 40 GHz with a maximum VSWR of 1.25:1.

The AKF-1950 utilizes XBAW technology with low insertion loss for high-performance RF filtering. 

RFMW announced design and sales support for QPL7434, a FTTH xPON differential video receiver with a frequency span of 47 to 1218 MHz, 

RFMW introduces a highly integrated motor controller, Qorvo’s PAC5524, features integrated LDOs, gate drivers, amplifiers, comparators and 70V DC/DC buck controller.

RFMW announces design and sales support for a Southwest Antennas’ omnidirectional antenna. The 1001-236 provides a 200 MHz bandwidth operating from 2.5 to 2.7 GHz with 2 dBi of gain.

RFMW portfolio of broadband SMD filters is comprised of ceramic substrate filters using patented materials which exhibit excellent temperature stability and high K factors.

World’s smallest ASIC based, Rakon U8176LF 10 MHz OCXO include 5G remote radio head, small cell, optical network and microwave transmission system applications. 

RFMW announced design and sales support for a high power, SMT RF limiter, the RFuW Engineering model RFLM-102402QF-290.

The SKY66404-11, 2.4 GHz FEM is designed for Zigbee®, Thread and Bluetooth® (including low energy) ultra-low power IoT applications spanning sensors, beacons, and more.

The PDW06984 power divider operates from 25 to 32 GHz with a maximum excess insertion loss of 0.7 dB while consuming just 2.5 mm² of board space.

The QPA9903, with on-chip bias control circuit, is suitable for small cell base station applications over the 1805 to 1880 MHz frequency range (Band 3).

MMA-062020 provides 14 dB of gain with typical gain flatness of +/- 0.8 dB. P1dB output power measures >18 dBm with OIP3 of 28 dBm.

The ART2K0FE power LDMOS transistor provides 2000 W of pulsed RF energy for ISM applications in the HF to 400 MHz band.

Endura^TM oscillators offer industry leading robustness and reliability with 0.004 ppb/g acceleration sensitivity, 30,000g shock, 70g vibration resistance, one billion hour MTBF and ±500 ppb 20 year aging.

The U7565LF Mercury/+™ OCXO platform meets frequency accuracy requirements up to Stratum 3E level (10 ppb pk-pk).

The D3C3740Q circulator covers Ka-band frequencies from 37 to 40 GHz with 18 dB of isolation. A single-junction design, insertion loss is only 0.7 dB maximum, preserving precious power in the mmWave bands

VCSO microchip VS-800 offers industry leading performance with fundamental mode operation from 800 MHz to 1.6 GHz and multiplied operation to 3.2 GHz.

A high frequency power amplifier from Qorvo, the TGA2222 offers 10 W of saturated power with large signal gain of 16 dB.

The SKY66118-11 offers high level integration with power amplifier, switching and filtering for reduced PCB area use and reduced development costs.

CMX902 RF power amplifier IC offers greater than 60% efficiency at VHF frequencies. This 3-stage amplifier spans 130 to 700 MHz with up to 39 dB of RF power gain.

SCT7033 embeds the full AIS Class B CSTDMA protocol stack within the device. Programmable across the entire marine band (156.000 to 162.050 MHz).

QPA9424, with on-chip bias control and temperature control circuits, is suitable for small cell base station applications over 2300 to 2400 MHz frequency.

RFMW announces a broad bandwidth, GaN, solid state power amplifier. SSPA 0.020-6.000-35 operates from 20 MHz to 6 GHz and delivers 35 to 50 W (typ.) of saturated output power. 

RFMW Ltd. announces availability of high frequency, bypass capacitors. The V-Series of single layer capacitors are wire bondable and perfect for GaN and GaAs amplifier applications.

RFMW announces design and sales support for a robust lead circulator. The SKYFR-001692 is offered in a 10 mm diameter package measuring 7 mm in height.

RFMW introduces a high reliability oven controlled crystal oscillator. The OX-601 series oscillators offer a fast warm up time of three minutes to reach +/- 50 ppb of the final frequency.

RFMW announces design and sales support for Peregrine Semiconductor’s PE45450, adjustable power limiter providing protection for up to 50 W pulsed RF input from 9 kHz to 6 GHz.

The QPA8801 features a push-pull cascode design providing flat gain and ultra-low distortion.  Ideal for DOCSIS 3.1 applications from 45 to 1218 MHz.

The D3I2731Q isolator covers Ka-band frequencies from 27 to 31 GHz with 20 dB of isolation. A single-junction design, insertion loss is only 0.6 dB maximum. 

RFMW offers a high frequency power amplifier from Qorvo. The QPA2210D offers 2.5 W of linear power at 25 dBc IMD3 with small signal gain of 25 dB.

A series of mmWave, 5G circulators. The D3C2731Q circulator covers Ka-band frequencies from 27 to 31 GHz with 20 dB of isolation.

RFMW introduces an GaAs pHEMT/MESFET 75-ohm power doubler amplifier. The Qorvo QPA3357 provides over 28 dB of flat gain and low noise of 4.5 dB.

High-performance, mmWave, 5G front end module QPF4001 operates from 26 to 30 GHz with receive path (LNA+TR SW.)

Exhibiting high-power handling of up to 30 dBm, the AKF-1252 supports the latest WiFi standards for tri-band routers and access points, LTE/LAA small cells and other 5 GHz WiFi designs.

Availability of a high frequency, wide band surface mountable directional coupler, FPC07180. It spans 2 to 18 GHz in a castellated, surface mount package.

Operating in the 2.4 GHz, ISM band, the SCT2400 provides secure communication links over long ranges, up to 12km line-of-sight, but with extremely low power consumption.

The SiT5711 offers ±5 ppb frequency stability and 50 ppt/°C frequency slope (ΔF/ΔT).

As a discrete, beam lead, the HSCH-9161 detector diode offers low junction capacitance of 0.035 pF and an fc >200 GHz making it ideal for medium-low barrier, zero bias detector circuits.

The RFLM-262322HC-151 protects S-Band receivers from 2.6 to 3.2 GHz and is capable of handling 500 W Peak Power while operating at +85 degrees C.

The 351 operates from DC to 40 GHz using 2.92 mm coaxial connectors. VSWR is as low as 1.05:1 with power handling up to 500 W peak or 50 W average.

QPC1217Q, a dual-pole double-throw transfer switch designed for general purpose switching applications between 700 to 6000 MHz where RF port transfer control is needed.

Qorvo’s model QPB8857 provides over 28 dB of flat gain and low noise of 4.5 dB for DOCSIS 3.1 amplifiers, head-end CMTS equipment and broadband CATV hybrid modules from 47 to 1218 MHz.

The QPF4588 offers 33 dB of Tx gain and 16 dB of Rx gain with LNA noise figure of 2.0 dB. Integrated 2.4 GHz filters provide rejection on the receive path to reduce system-level filtering.

The 8T79S308 is designed for distribution and fanout of high-frequency clocks or low-frequency synchronization signals in either baseband or RF sections of wireless infrastructure radios.

The QPF4578 front end module integrates a 5 GHz PA, SP2T switch and bypassable low noise amplifier (LNA) into a single device.

A high performance LNA covering 7 to 14 GHz. QPA2609D provides 27 dB of small signal gain with a noise figure of 1.1 dB.

The BLC2425M10LS500P is a 32 Volt LDMOS power transistor for use in commercial and consumer cooking, industrial, scientific and medical applications at frequencies from 2400 to 2500 MHz.

RFMW Ltd. announces support for an extremely high output CATV amplifier. Qorvo’s power doubler model QPA3250 provides up to 76.8 dBmV composite power or 67 dBmV virtual level.

SSPA 20.0-24.0-40 operates from 20 to 24 GHz and delivers a typical output power of >40 W. The SSPA 20.0-24.0-40 can be blanked on and off in less than 10.0 uSec.  OIP3 is 50 dBm minimum.

The QPA4501 has 2-stages of amplification for 30 dB of gain, with the final stage integrated as carrier/peaker in a Doherty configuration providing 38% power added efficiency and 3 W of average power.

 The 8V19N492 is designed as a high-performance clock solution for conditioning and frequency/phase management of wireless infrastructure radios in 4G, 5G, MIMO and AAS as well as instrumentation and radar.

The ACA1240 combines a pre-amp, attenuator and driver amp to provide up to 35 dB of gain and 0 to 20 dB of continuously-adjustable, linear attenuation from 50 to 1218 MHz.

The Qorvo TQP200002 is a cost-effective solution to protect high-quality RF signal integrity when ESD sensitive devices are in a circuit. This small (1.5 x 1.2 mm) SMT device is bidirectional.

With seven amplification stages, the MMA036AA Traveling Wave Amplifier offers 11 dBm P1dB (14.5 dBm pSat) for applications to 50 GHz.

Qorvo’s QPB9320 integrates a two-stage LNA and a high power switch that provides power handling up to 52 W of average power. Supporting applications across a frequency range of 1850 to 2025 MHz.

The Qorvo QPQ1297 supports Band 3 LTE, small cells, mobile routers and repeater designs with uplink pass band frequencies from 1710 to 1785 MHz and downlink pass band frequencies from 1805 to 1880 MHz.

The SSHPS 1.0-2.5-200, single-pole, double-throw (SPDT) switch handles up to 200 W of CW RF power from 1,000 to 2,500 MHz for communication and Electronic Warfare systems.

RFMW Ltd. announces a high-performance, wideband, driver amplifier. Qorvo’s QPA2213, GaN on SiC amplifier provides >2 W Psat across a bandwidth of 2 to 20 GHz.

RFMW Ltd. announces a low current hybrid amplifier. Qorvo’s CATV power doubler model QPA3223 reduces system DC current requirements as it draws only 410 mA from a 24 volt supply.

RFMW Ltd. announces design and sales support for a high gain, broadband RF amplifier. The IDT model F0424 operates from 600 to 4200 MHz with up to 17.3 dB of gain.

RFMW Ltd. announces design and sales support for a broad bandwidth DSA. The pSemi PE43508 offers 6-bit control with 0.5 dB LSB step accuracy for 31.5 dB attenuation range from 9 kHz to 55 GHz.

RFMW Ltd. announces design and sales support for a high power, high isolation, symmetrical, SPDT switch. The SSHPS 2.5-6.0-150 handles up to 150 W of CW RF power. 

RFMW Ltd. introduced the API Weinschel 4209 series of digital attenuators. The 4209-31.5-1 is equipped with 2.92 mm Female connectors while the 4209-31.5-2 offers 2.4 mm Female connectors.

RFMW Ltd. announces design and sales support for thin film, fixed attenuator pads from SemiGen, Inc. SemiGen offers a series of fixed attenuators from 1 to 30 dB in 1dB increments with flat frequency response from DC to 50 GHz.

RFMW Ltd. announces design and sales support for an ultra-broad bandwidth, GaN, solid state power amplifier from Aethercomm. Model number SSPA 0.2-2.5-200 operates from 200 to 2500 MHz and delivers a typical, saturated output power of 200 W. 

RFMW Ltd. introduced a high-performance, X-band, T/R module. The Qorvo QPM1002 incorporates a T/R switch, low noise amplifier and performs well in high temperature environments due to 0.25 um GaN-on-SiC fabrication.

RFMW Ltd. announces design and sales support for a family of high-performance front-end modules (FEMs) designed for improved range in low-power WAN (LPWAN), IoT applications.

RFMW Ltd. announces design and sales support for a SOI SP6T switch designed for use in CATV, satellite set top, and other high-performance communications systems. QPC6762 operates in 75 ohm environments from 5 to 2000 MHz and offers 34 dB of mid-band isolation.

RFMW Ltd. announces design and sales support for a 7-bit digital attenuator from IIDT. The F1958 features ultra linear IIP3 of 64 dBm with 31.75 dB of control range in 0.25 dB steps.

RFMW Ltd. announces the 2.4 GHz Wi-Fi FEM. Qorvo’s QPF7221 front end module integrates a receive coexistence BAW filter with a 2.4 GHz power amplifier, SPDT switch, and LNA with bypass capability.

RFMW Ltd. announces design and sales support for RF Circulator Isolator, Inc (RFCI) circulators designed to meet the demands of linear power amplifiers in lower 5G band systems.

RFMW Ltd. announces a pair of high performance front-end modules (FEMs) from Skyworks Solutions. With frequency coverage of 1559 to 1606 MHz, the SKY65933-11 and SKY65943-11 provide amplification and filtering for GPS L1, GLONASS, Galileo, Compass and QZSS navigation systems.  

RFMW Ltd. announces design and sales support for a broad bandwidth, GaN, solid state power amplifier from Aethercomm. Model number SSPA 6.0-12.0-100 operates from 6 to 12 GHz and delivers a minimum output power of 100 W. 

RFMW Ltd. announces design and sales support for a high performance LNA covering 7 to 14 GHz. The Qorvo QPA2609 provides 26 dB of small signal gain with a noise figure of 1.1 dB for point-to-point and satellite communication systems.

RFMW Ltd. announces support for a helical designed, bifilar antenna. 032-034 is a right hand circularly polarized (RHCP) omnidirectional antenna operating from 4.4 to 5.9 GHz with 3.75 dBic of gain.

RFMW Ltd. announces design and sales support for a phase-frequency detector from Microsemi. The PFD1K incorporates dual, 0.01 to 40 GHz, 7-bit programmable, high-speed prescalers for reference and VCO inputs.

The half-wave, dipole antenna, 1001-201 is designed to support permanent ground communication stations or temporary installations for short-term communication networks in the 340 to 470 MHz frequency range.

Designed for next-generation AESA radar applications, the Qorvo QPM2637 FEM incorporates a T/R switch, power amplifier, low noise amplifier and power limiter into a 6 x 6 mm package.

RFMW Ltd. announces design and sales support for MECA Electronics 2-way, broadband, resistive, power dividers covering DC-18 GHz (802-3-9.000) and DC-26.5 GHz (802-3-13.250) via high performance 2.9 mm connectors.

RFMW Ltd. announces design and sales support for a high performance T/R FEM designed for improved range in Internet of Things (IoT) applications. The Skyworks Solutions SKY66119-11 delivers 30.5 dBm output power at 400 to 500 MHz effectively.

RFMW Ltd. announces design and sales support for a 60 MHz bandwidth, band 25 BAW filter. The Qorvo QPQ1295 offers exceptional rejection at 1922.5 MHz and boasts an average input power capability of 27 dBm.

RFMW Ltd. announces design and sales support for a silicon on insulator (SOI) single-pole, four throw (SP4T) switch. Qorvo’s QPC6742 operates in 75 ohm environments from 5 to 2000 MHz and offers 34 dB of mid-band isolation.

RFMW Ltd. announces design and sales support for a versatile, cost-effective GaN transistor from NXP. NXP’s MMRF5017HS operates from 30 to 2200 MHz and offers 125 W CW in narrow band applications and 90 W CW in broadband applications.

RFMW Ltd. announces design and sales support for a Southwest Antennas’ omnidirectional antennas. Designed to support DOD / Government L-band radios operating from 1.35 to 1.39 GHz, the 1087-071 collinear antenna offers 6 dBi of peak gain.

RFMW, Ltd. announces design and sales support for a pair of 75 ohm amplifiers. Qorvo’s QPB7420 and QPB7425 ICs are designed to support fiber to the home (FTTH) applications from 47 to 1218 MHz. Both devices offer noise figure of 1.1 dB.

RFMW Ltd. announces design and sales support for MAST Technologies' MD10-0008-00-N engineering design kit containing a variety of samples intended to be cut and utilized during the design process for cavity resonance disruption, surface wave attenuation, reflection loss or insertion loss.

RFMW Ltd. announces design and sales support for an ultra-low-noise, bypass LNA gain block. The Qorvo QPL9096 spans 1700 to 2700 MHz for wireless infrastructure applications. The integrated bypass function offers high linearity in bypass mode.

RFMW Ltd. announces design and sales support for a balanced return path amplifier serving DOCSIS 3.1 applications in head-end CMTS equipment, optical nodes and residential amplifiers or as a post-amplifier for return path optical receivers.

RFMW Ltd. announces design and sales support for a fast switching absorptive switch. Qorvo’s QPC6324 SPDT offers 180 nS switching speed and high isolation (63 dB) for base station receivers, macro cells, pico cells and massive MIMO applications. Compatible with 1.8 V logic.

RFMW Ltd. announces design and sales support for a high power, SMT RF limiter. The RFuW Engineering model number RFLM-501202MC-299 protects receivers from 250 MHz to 3.5 GHz and is capable of handling +54 dBm Peak Power while operating at +85 degrees C.

RFMW Ltd. announces design and sales support for a high isolation switch. Qorvo’s QPC3024 symmetric, SPDT switch offers >65 dB isolation for CATV equipment operating in 75 ohm environments. Spanning 5 to 3000 MHz, it serves both forward path and return path applications. 

RFMW Ltd. announces design and sales support for a family of broadband LNA modules with bypass mode from Skyworks Solutions. The SKY6580x-696LF family enables low-noise figure and high gain operation in LTE, M2M applications. The SKY6580x-696LF series includes four modules.

RFMW Ltd. announces support for a balanced return path amplifier serving DOCSIS 3.1 applications in head-end CMTS equipment, optical nodes and residential amplifiers. Qorvo’s QPB2318 spans 5 to 210 MHz with dual, amplifiers configurable for balanced operation and providing 15 dB of gain.

RFMW Ltd. announces design and sales support for a broad bandwidth, GaN, solid state power amplifier. Model Number SSPA 0.020-6.000-35 operates from 20 MHz to  6GHz and delivers 35 to 50 W (typ.) of saturated output power for broad band T&M, military and commercial applications.

RFMW Ltd. announces design and sales support for pSemi’s tuning control switch. The PE613050 is a single-pole, four-throw (SP4T) switch designed to improve front-end performance in radios using multiple antennas supporting a variety of wireless protocols.

RFMW Ltd. announces design and sales support for a high-power GaN transistor from Qorvo. The QPD1025 offers 1563 W of P3 dB RF power from 1000 to 1100 MHz, satisfying IFF transponders and other avionics applications. 65 V operation offers higher efficiency (77.4% PAE.)

RFMW Ltd. announces design and sales support for a high power, LDMOS-based pallet amplifier. The Ampleon BPC10M6X2S200 offers 200 W of pulsed or CW RF power from 423 to 443 MHz for ISM band implementations in plasma lighting, RF cooking/defrosting, industrial heating and medical applications.

RFMW Ltd. announces design and sales support for a Wi-Fi 802.11a/n/ac/ax front end module. The Qorvo QPL7210 integrates a 2.4 GHz low noise amplifier (LNA), an LNA bypass and high selectivity receive BAW filter for wireless coexistence.

RFMW Ltd. announces design and sales support for the Delta Electronics Manufacturing VITA 67 series connectors targeted for applications requiring robust mechanical and environmental performance in a small package. Supports RF frequencies up to 40GHz.

RFMW Ltd. announces design and sales support for dipole antennas with integrated gooseneck transmission lines and internal bandpass filtering. The 1001-147 includes a 3-pole, bandpass filter to reduce interference from co-located radios operating outside the antenna’s 1.98 to 2.20 GHz operational frequency range.

RFMW Ltd. announces design and sales support for a compact RF signal generator IC from Ampleon. The BLP25RFE001 covers 433 MHz, 915 MHz and 2.45 GHz RF Energy ISM bands commonly used in industrial heating or microwave cooking applications.

RFMW Ltd. announces design and sales support for a DOCSIS 3.1 compliant return path amplifier. The Qorvo QPB3321 is an HBT, single-ended, RF amplifier IC operating from 5 to 210 MHz. Designed to provide a low noise, high gain option, it uses an 8 V power supply to provide lower overall power dissipation.

RFMW Ltd. announces design and sales support for an integrated Edge QAM amplifier module from Qorvo. The RFAM3620 employs GaAs pHEMT die, GaAs MESFET die, a 20 dB range variable attenuator and a power enable feature.

RFMW Ltd. announces design and sales support for a 75 ohm digital step attenuator (DSA). The Qorvo QPC3614 offers 6-bits of attenuation with 0.5 dB LSB step size providing 31.5 dB of attenuation range from 5 to 1500 MHz.

RFMW Ltd. announces design and sales support for XMA Corp’s 8582-6150-xx series of 2.4 mm, 50 GHz attenuators. The XMA coaxial attenuators are available in standard dB values of 3, 6, 10, 20 and 30 dB.

RFMW Ltd.'s QPC9314 PIN-diode based switch can handle 52 W of average power with an LTE signal (8 dB PAR) and contains two LNA stages, and a 1-bit DSA to provide a high and low gain mode.

RFMW Ltd. announces design and sales support for an integrated front end module (iFEM) designed for Wi-Fi applications. Qorvo’s QPF7200 integrates a 2.4 GHz power amplifier, bypassable transmit BAW filter, LNA with bypass function and receive coexistence BAW filter into a single module.

RFMW Ltd. announces design and sales support for an ultra low-noise amplifier with integrated bypass function. The Qorvo QPL9095 offers 0.6 dB noise figure and operates from 500 to 1000 MHz with 22 dB of gain.

RFMW Ltd. announces support for dipole antennas with integrated internal bandpass filtering. The Southwest Antennas’ 1001-139 includes a 3-pole, bandpass filter to reduce interference from co-located radios operating outside the antenna’s 2.1 to 2.5 GHz operational frequency range.

RFMW Ltd. announces design and sales support for Smiths Interconnect “Outrigger” resistors. The CRH04091005F is a 100 ohm resistor capable of handling 1 W CW and up to 10 W of pulsed RF power yet measures only 1.02 x 2.29 mm. 

RFMW Ltd. announces support for a balanced amplifier module with embedded hybrid couplers. The Qorvo QPA9807 offers single ended input and output ports with very good return loss and incorporates and enable pin to shut down the amplifier for improved receive sensitivity. 

RFMW Ltd. announces design and sales support for MECA Electronics microwave and millimeter-wave isolators. Optimized for excellent performance across K, Ku, and Ka bands, these 2 W isolators cover 18.0 to 26.5 GHz, 27.0 to 31.0 GHz and 26.5 to 40.0 GHz.

RFMW Ltd. announces design and sales support for two, highly integrated front-end modules from Qorvo. The QPB9324 and QPB9325 combine a high power handling (52 W) switch with two low noise amplifiers targeting wireless infrastructure applications configured for TDD-based architectures.

RFMW Ltd. announces design and sales support for dipole antennas with integrated gooseneck transmission lines and internal bandpass filtering. The 1001-134 includes a 3-pole, bandpass filter to reduce interference from co-located radios operating outside the antenna’s 1.35 to 1.40 GHz operational frequency range.

RFMW Ltd. announces design and sales support for the Qorvo QPA9805, 700 to 1000 MHz balanced amplifier. With integrated hybrid couplers, the QPA9805 provides good return loss and gain flatness across the band.

RFMW Ltd. announces design and sales support for the Skyworks Solutions SKY66114-11, a low power front end module for bluetooth low energy (BLE) applications. A fully integrated 2.4 GHz module, the SKY66114-11 offers 23 dBm Tx output power which quadruples the effective range of standalone system on chip (SoC) solutions.

RFMW Ltd. announces design and sales support for a multi octave bandwidth, GaN, solid state power amplifier from Aethercomm. model number SSPA 6.0-18.0-30 operates from 6 to 18 GHz and delivers 30 W (typ.) of saturated output power to the load. Typical small signal gain is 45 to 55 dB while typical power gain is 40 to 45 dB. A PA Enable Command is used to gate the PA on and off.

RFMW Ltd. announces design and sales support for small form factor antenna from Southwest Antennas. The 1001-202 is a half-wave dipole, omni antenna for 2.1 to 2.5 GHz applications. Measuring only 4.29 inches in height, it offers 2.15 dBi of peak gain.  The antenna features a tough, black, G10 fiberglass radome and a black-chrome, TNC(m), non-rotating, RF connector.

RFMW Ltd. announces design and sales support for a high power, solid state power amplifier from Aethercomm. Designed for high power, linear applications in both ground and airborne systems, the SSPA 2.0-6.0-250 delivers a nominal 250 W from 2.0 to 6.0 GHz and attains 300 W of saturated RF power for non-linear requirements. The SSPA 2.0-6.0-250 offers 70 dB of small signal gain.

RFMW Ltd. announces design and sales support for a pair of Peregrine Semiconductor, high frequency, silicon on insulator (SOI) switches. The PE42525 and PE426525 are SPDT switches operating from 9 KHz to 60 GHz. Both switches offer fast, 8 nS switching time and high input linearity of 48 dBm IIP3. The PE42525 finds applications in test & measurement. The PE426525 is targeted towards harsh industrial applications. 

RFMW Ltd. announces design and sales support for a Skyworks, low energy, front end module. The SKY66115-11 is designed for range extension and smart metering applications in the 400 to 510 MHz range. Consisting of a complete T/R chain with a T/R switch contained in the module, the SKY66115-11 module has a shutdown mode to minimize power consumption. 

RFMW Ltd. announces design and sales support for CML Microcircuits’ CMX979 low power, dual RF/IF synthesizer IC. The CMX979’s RF fractional-N synthesizer section, with integrated VCO, takes only 36 to 45 mA to produce a 2.7 to 3.6 GHz output LO signal. The synthesizer's configurable 1/2/4/6/8 frequency divider can shift its output to as low as 338 MHz.

RFMW Ltd. announces design and sales support for a 10 MHz to 6 GHz RF power limiter capable of handling 100 W of pulsed input power. Peregrine Semiconductor’s PE45361 is a monolithic structure 8 times smaller than discrete, PIN-diode solutions and eliminates thermal hysteresis. The adjustable input 1dB compression point (limiting threshold) is set from +7 to +13dBm via a low current control voltage (VCTRL).

RFMW Ltd. announces design and sales support for a high linearity gain block from Qorvo. Featuring >-75 dBc CSO, the RFCA8830 covers 45 to 1218 MHz as a DOCSIS 3.1 compliant amplifier for HFC optical nodes, laser drivers and balanced antenna applications. Gain measures 19 dB and noise figure is <2 dB. Operating from 5 V, the RFCA8830 is packaged as an SOIC8.

RFMW Ltd. announces design and sales support for a Band 1 BAW duplexer filter. The Qorvo QPQ1282 supports Band 1 LTE, small cells, mobile routers and repeater designs with uplink pass band frequencies from 1920 to 1980 MHz and downlink pass band frequencies from 2110 to 2170 MHz. No external matching is necessary and the QPQ1282 offers 48 dB attenuation between bands. Power handling is 29 dBm.

RFMW Ltd. announces design and sales support for a DOCSIS 3.1 compliant amplifier from Qorvo. Gain, return loss and bias are externally adjustable on the Qorvo QPB7400. Matched to 75 ohms, this adjustable gain amplifier operates from 45 to 1218 MHz and has on-chip active bias for consistent and repeatable performance over temperature.

RFMW Ltd. announces design and sales support for a WiFi BAW filter from Qorvo. The 885136 offers bandedge rejection at 2390 and 2583.5 MHz for WiFi CPE, access points, set top boxes, gateways, smart meters and IoT applications. Featuring LowDrift ^TM  BAW technology, operating temperature is extended from -40 to +95 degrees Celsius allowing outdoor operation with minimal drift. Insertion loss is 0.9 dB (channels 2 to 11) while low band attenuation of unwanted signals is 31 dB and high band attenuation is 24 dB.

RFMW Ltd. announces design and sales support for a GNSS LNA targeting small-form factor, low-power IoT applications. The Skyworks SKY65623-682LF is a discrete LNA optimized to operate from 1559 to 1606 MHz and designed for applications such as wearables, asset trackers, navigation devices and action cameras. Very low current consumption of 1 mA increases battery life of 1.8 V cell batteries. Gain is 16.5 dB while noise figure is 0.85 dB. 

RFMW Ltd. announces design and sales support for omni-directional concealment antenna products specifically for use in covert surveillance or other applications where an antenna needs to be hidden from view or disguised to not draw attention. Southwest Antennas’ model 1066-014 offers quad-band, 4G, LTE cellular coverage for global use. This antenna offers superior, 360 degree horizontal beamwidth and 76 degree low-band vertical beamwidth (46 degree high-band vertical beamwidth) when properly mounted.

RFMW Ltd. announces design and sales support for a series of high power amplifiers from Skyworks Solutions. The SKY6629x-11 series includes eight models of high-efficiency (~35 percent at Pout = +28 dBm), 4 W amplifiers covering frequency bands from 700 to 3800 MHz. Targeted for the fast growing enterprise small cell market, these 4 W PAs meet higher data rate and lower power consumption requirements for indoor and outdoor enterprise systems

RFMW Ltd. announces design and sales support for a broadband, high-isolation switch from Qorvo. Absorptive by design, the QPC6014 can handle up to 4 W of input power from 50 to 6000 MHz and 2 W from 5 to 50 MHz. Offered as a single-pole, single-throw (SPST), isolation ranges from 70 dB at lower frequencies to 43 dB at 4GHz.

RFMW Ltd. announces design and sales support for an expanded offering of SMD square air coils from Frontier Electronics. The new LSQ1111A – LSQ2929A series offer a higher current rating (up to 5.7 A), an inductance range of 27 to 500 nH and SRF values as high as 2.6 GHz. Designed primarily for use in RF circuits such as filters, bypassing and/or decoupling signals, these larger coils compliment the already established LSQ0706A –  LSQ0908A series.

RFMW Ltd. announces design and sales support for the Skyworks Solutions SKY66105-11 front end module (FEM). The SKY66105-11 offers high output power (30 dBm) for 902 to 931 MHz, ISM band transmit applications such as smart metering for water, gas and electric. With integrated harmonic filters and a DPDT switch for diversity antennas, this FEM also incorporates on-board matching and integrated shielding thereby reducing required board space and easing design.

RFMW Ltd. announces design and sales support for a 1900 W pulsed RF power transistor from Ampleon. The BLF189XRB supports industrial applications in the 30 to 150 MHz frequency range such as magnetic resonance imaging (MRI). Offering gain of 23 dB, efficiency is 63%. Excellent ruggedness is a hall mark of Ampleon high power LDMOS and the BLF189XRB can withstand VSWR mismatch as high as 65:1.

RFMW Ltd. announces design and sales support for a 1500 W CW (1700 W pulsed) RF power transistor from Ampleon. The BLF189XRA spans a frequency range of 30 to 500 MHz for broadcast and industrial applications such as CO2, plasma RF, and VHF radio. Offering gain of 26.5 dB in CW operation, efficiency is 75%.

RFMW Ltd. announces design and sales support for a high efficiency, high power transistor from Qorvo. The Qorvo QPD2795 GaN power transistor has a P3dB of 360W for Band 7 and Band 41 wireless communications infrastructure and microcell designs in the 2.5 to 2.7GHz frequency range. Offering typical drain efficiency of 72% and linear gain of 22dB, the QPD2795 draws 700mA from a 48V supply. Qorvo packages this transistor in an eared, ceramic, air cavity package.

RFMW, Ltd. announces design and sales support for an integrated power amplifier module from Qorvo.

RFMW, Ltd. announces design and sales support for a 5 GHz, Wi-Fi, low noise amplifier (LNA).

RFMW, Ltd. announces design and sales support for a Qorvo GaN on SiC transistor serving radar, mil comm, avionics, jammers and wideband amplifier applications.

RFMW, Ltd. announces design and sales support for a Doherty GaN transistor from Qorvo.

RFMW Ltd. announces design and sales support for a 9 to 10 GHz, 35 W, GaN power amplifier targeted towards weather and marine radar applications.  The Qorvo TGA2622-SM provides a saturated output power of 45.5 dBm with 18 dBm input. Power added efficiency is >42% and large signal gain is 27.5 dB. For non-saturated applications, small signal gain is >30 dB.

RFMW Ltd. announces design and sales support for a B1 uplink filter. The Qorvo TQQ7301 uses BAW technology providing high isolation and low loss for small cells, LTE data cards, repeaters and base station infrastructure applications. Covering the 60 MHz bandwidth of 1920 to 1980 MHz, insertion loss is only 4 dB while attenuation of unwanted signals is 30 dB. Additionally, the TQQ7301 can handle up to 27 dBm of input power.

RFMW Ltd. announces design and sales support for a front-end module (FEM) designed for GPS and GLONASS applications. TST’s TN0081A contains a high performance pre-SAW filter, low noise amplifier (LNA) and post-SAW filter providing 18.5 dB of in-band gain and very high out-of-band rejection of unwanted signals. Relative to the center frequency of 1575 MHz, rejection is 85 dBc from 704 to 915 MHz and 75 dBc from 1710 to 1980 MHz.

RFMW Ltd. announces design and sales support for a 7-bit digital attenuator from Qorvo. The QPC6713 features high linearity over the entire 31.75 dB gain control range in 0.25 dB steps. Qorvo offers this DSA for point-to-point radio, 2 G through 4 G base stations, WiFi transceiver and other applications within its 50 to 6000 MHz frequency range. Overshoot free transient switching performance is a highlight of this attenuator along with a highly linear input IP3 of 55 dBm.

RFMW Ltd. announces a pair of Peregrine Semiconductor, high frequency, SOI switches. The PE42525 and PE426525 are SPDT switches operating from 9 KHz to 60 GHz. Both switches offer fast, 8 nS switching time and high input linearity of 48 dBm IIP3. The PE42525 finds applications in test & measurement, microwave backhaul and communications systems and the PE426525 is targeted towards harsh industrial applications. 

RFMW Ltd. announces design and sales support for the 392P0000, 12 Amp pulsed switch from XSYSTOR Inc. The 392P0000 MOS type switch is placed between the drain choke of the GaN transistor and power supply. It works with XSYSTOR 100 and 200 series controllers to protect, operate, and modulate the GaN device. The unit is rated for drain voltages from 28 to 80 V with very-low Rds ON.

RFMW Ltd. announces design and sales support for a high isolation, absorptive switch. The Qorvo RFSW6024 supports WIFi, LTE, 4G and general purpose wireless infrastructure from 5 to 6000 MHz. This SPDT switch offers 60 dB of isolation at 2 GHz and IIP3 of 66 dBm. Absorptive, it can handle a max CW input of 36 dBm. Insertion loss is only 0.75 dB and switching speed is 250 nS.

RFMW Ltd. announces design and sales support for a plastic GaN transistor from Qorvo. The TGF2978-SM provides 20 W of saturated power from 8 to 12 GHz for various applications including marine and weather radar, military radar and avionics. Operational to very low frequency, the recommended bias voltage is 32 V. The TGF2978-SM provides >46% PAE and small signal gain of >11 dB at mid X-band frequencies.

RFMW Ltd. announces design and sales support for Qorvo’s TQP9424, a 0.5 W power amplifier for small cell radios. Spanning the 2300 to 2400 MHz frequency band, this internally matched amplifier covers band 30 and band 40 wireless infrastructure applications. The TQP9424 has 36 dB of gain and -47 dBc ACLR at 27 dBm.  Recommended supply voltage is 4.5 V with 470 mA current draw.

RFMW Ltd. announces design and sales support for Southwest Antennas’ “cloverleaf” configuration of omni antennas. These antennas are 3 x smaller than existing solutions yet maintain similar antenna gain, efficiency and excellent radiation pattern control over the entire operational frequency band. Model 1032-024 is a right hand circular polarized (RHCP) Omni cloverleaf antenna with 2.3 to 2.5 GHz frequency band coverage and 1.2 dBi gain. Model 1032-025 is a left hand circular polarized (LHCP) antenna.

RFMW Ltd. announces design and sales support for a plastic GaN transistor from Qorvo. The TGF2977-SM provides 5 W of saturated power from 8 to 12 GHz for various applications including marine and weather radar, military radar and avionics. Operational to very low frequency, the recommended bias voltage is 32 V. The TGF2977-SM provides >50% PAE and small signal gain of >13 dB at mid X-band frequencies.

RFMW Ltd. announces design and sales support for a broadband amplifier designed to support electronic warfare, defense communications and L-Band radar. The Qorvo TGA2976-SM provides 10 W of saturated power with an input power of 0.5 W. While large signal gain is 13 dB, small signal gain is >20 dB. Supporting applications in frequencies from 100 to 3000 MHz, the TGA2976-SM requires a 40 V bias with 360 mA of current.

RFMW Ltd. announces design and sales support for a digital step attenuator (DSA). The Qorvo RFSA3523 offers 5-bits of attenuation with 0.5 dB LSB step size providing 15.5 dB of attenuation range from 5 to 6000 MHz. Featuring overshoot-free transient switching between attenuation steps, the RFSA3523 is ideal for wireless infrastructure, military radio, land mobile radio and access points.

RFMW Ltd. announces design and sales support for Qorvo’s TQP9224, a ¼ W power amplifier for small cell radios. Spanning the 2300 to 2400 MHz frequency band, this internally matched amplifier covers band 30 and 40 wireless infrastructure applications.The TQP9224 has 38 dB of gain and -50 dBc ACLR at 24 dBm. Recommended supply voltage is 4.5 V with 237 mA current draw but it can be operated at 5 V if higher power is needed.

RFMW Ltd. announces design and sales support for a digital phase shifter from Qorvo. The TGP2109-SM offers 6-bit resolution with 5.625 degree LSB. Designed to support commercial and military radar in the 8 to 12 GHz (X-band) frequency range, input P1dB level is 29 dBm. IIP3 is >40 dBm while insertion loss is 6 dB. The TGP2109-SM comes in a 4 x 4 mm QFN package but is available in DIE form as the TGP2109.

RFMW Ltd. announces design and sales support for a 50 W power handling VPIN limiter from Qorvo. The TGL2209-SM protects receiver chains in commercial and military radar and communications systems. Providing frequency coverage from 8 to 12 GHz, flat leakage power is <18. 5 dBm. Both input and output ports are matched to 50 ohms with return loss of >17 dB.

RFMW Ltd. announces design and sales support for a low power, highly integrated, wideband, IQ modulator with integrated fractional-N synthesizer and voltage controlled oscillator (VCO). Qorvo’s RFMD2081 modulator features an input 3 dB bandwidth of 100 MHz, and can generate output frequencies of between 45 and 2700 MHz, making it suitable for a wide range of applications.

RFMW Ltd. announces design and sales support for API Technologies’ ceramic patch antennas. Model PA25-1621-025SALF offers 4 dBic of gain at a center frequency of 1621 MHz +/-4 MHz. 10 dB bandwidth is 25 MHz. API Technologies offers a wide range of patch antennas for applications such as Globalstar, GPS, Inmarsat, Iridium, RFID and ISM radios and can customize performance for specific requirements. 

RFMW Ltd. announces design and sales support for a high efficiency power doubler designed to support DOCSIS 3.1 CATV hybrid fiber coax (HFC) requirements. The Skyworks ACA2429 offers 26.3 dB typical gain with 1dB tilt over the bandwidth of 50 to 1218 MHz. Ideal for HFC distribution systems and headend equipment, the ACA2429 operates from 24 V using 430 mA.

RFMW Ltd. announces design and sales support for a 10 W power handling VPIN limiter from Qorvo. The TGL2217-SM protects receiver chains in commercial and military radar, communications systems and electronic warfare applications. Providing frequency coverage from 100 MHz to 20 GHz, flat leakage power is <18. 5 dBm. Both input and output ports are matched to 50 ohms with return loss of >15 dB. 

RFMW Ltd. announces design and sales support for a broadband SPDT switch from Skyworks Solutions. With a frequency range of 1 to 6 GHz, the SKY13592-689LF is ideal for WLAN networks, repeaters, ISM radios, connectivity modules and >1 GHz LTE platforms. Power handling is 30 dBm P0.1 dB. Skyworks advanced switching technologies maintain low insertion loss of 0.5 dB and high isolation of 35 dB for all switching paths.

RFMW Ltd. announces design and sales support for Southwest Antennas’ “cloverleaf” configuration of omni antennas. Dubbed ‘Turbo Cloverleaf’, these antennas are 3 x smaller than existing solutions yet maintain similar antenna gain, efficiency and excellent radiation pattern control over the entire operational frequency band. Model 1032-021 is a right hand circular polarized Omni cloverleaf antenna with 1.98 to 2.2 GHz frequency band coverage and 1.2 dBi gain. Model 1032-022 is a left hand circular polarized antenna.

RFMW Ltd. announces design and sales support for a low power, highly integrated, IQ modulator with integrated fractional-N synthesizer and voltage controlled oscillator (VCO). The Qorvo RFMD2080 can generate output frequencies of between 45 and 2700 MHz, making it suitable for a wide range of applications such as satellite communications, QPSK/QAM modulators, SSB modulators and software defined radios (SDR).

RFMW Ltd. announces design and sales support for a voltage variable attenuator (VVA) for instrumentation, radar, communications and EW platforms in the 2 to 31 GHz frequency range. The Qorvo TGL2767-SM features a 20 dB attenuation range with < 2 dB of insertion loss. I/O return loss is >12 dB. The TGL2767-SM is available in a 3 x 3 mm SMT package or in DIE form as the TGL2767.

RFMW Ltd. announces design and sales support for body worn antennas from Southwest Antennas. 1065-031 is a RHCP antenna while 1065-032 offers LHCP. Developed to offer high performance, rugged antenna options, the antenna radome housing is resistant to damage from drops and other potential abuse. Both 1065-031 and 1065-032 antennas are designed for use with handheld or body worn MIMO / MANET radio systems operating from 1350 to 1390 MHz.

RFMW Ltd. announces design and sales support for a high linearity MMIC power doubler designed to support DOCSIS 3.1 CATV requirements. The Skyworks ACA1216 offers 27.5 dB typical gain at the upper end of its 50 to 1218 MHz frequency range. Ideal for hybrid fiber coax (HFC) equipment including line extenders, nodes, system amplifiers and headend equipment, the ACA1216 operates using 12 V and 725 mA.

RFMW Ltd. announces design and sales support for a voltage variable attenuator (VVA) for instrumentation, radar, communications and EW platforms in the 2 to 25 GHz frequency range. The Qorvo TGL2767 features a 20 dB attenuation range with < 2 dB of insertion loss. I/O return loss is >12 dB. The TGL2767 is available in DIE form and packaged (TGL2767-SM).

RFMW Ltd. announces design and sales support for the Skyworks Solutions SKY65903-11, front-end module (FEM) featuring a low-noise amplifier and integrated pre- and post- filters for GPS receiver applications.  The SKY65903-11 features in-band IIP3 of -7.3 dBm, small signal gain of 14.2 dB and noise figure of 1.7 dB for improved signal-to-noise ratio.  Integrated pre- and post-filters provide low in-band insertion loss and excellent rejection (76 dBc at 2.4 GHz.)

RFMW Ltd. announces design and sales support for a driver amplifier designed to support HPA implementation from 13 to 18 GHz and providing 2 W of saturated output power. The Qorvo TGA2958-SM is compatible with GaN HPA bias conditions allowing it to run from the same supply as the high-power amplifier. The TGA2958-SM, 3-stage driver, has a small signal gain of >25 dB yet draws only 70 mA of CW bias.

RFMW Ltd. announces design and sales support for SANAV antenna implementations. Focusing on sub-1 GHz products such as ISM band “Smart” meters (433/868/915 MHz), SANAV supports water, gas and electrical meters with a variety of antenna options. SANAV offers standardized antennas as well as customer specific designs based on frequency, available size, materials, etc.

RFMW Ltd. announces design and sales support for a high linearity amplifier from Amplifier Solutions Corporation (ASC). The ASC ASC520 provides a minimum of 33 dBm output power from 20 to 1200 MHz. Typical RF output power is 37 dBm to 550 MHz and 35 dBm from 550 to 860 MHz. Associated power gain is an extremely flat 22 dB. IP3, measured with 2 tones at +15 dBm/tone, is 52 dBm.

RFMW Ltd. announces design and sales support for a surface mount GaN power amplifier from Qorvo. The Qorvo TGA2830-SM offers 18 W of saturated output power from 2.7 to 3.5 GHz. Small signal gain is >30.5 dB and input return loss is rated at >11 dB. The TGA2830-SM draws 225 mA from a 20 to 32 V bias supply with >54% power added efficiency (PAE).

RFMW Ltd. announces design and sales support for a 2-stage low noise amplifier (LNA) with integrated bypass switch in the second stage. Operating from 1.5 to 3.8 GHz, the Qorvo TQL9065 provides 0.5 dB noise figure and up to 36 dB of gain through the internal amplifiers. When gain is not needed, the bypass switch automatically turns off the LNA for power savings.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE41901 mixer. The PE41901 is a MMIC, image reject mixer solution based on Peregrine’s UltraCMOS  technology. Incorporating two mixers, an LO path 90 degree coupler and RF port baluns, the PE41901 offers up to 38 dB LO-RF isolation for reduced filtering requirements.

RFMW Ltd. announces design and sales support for the Rosenberger Rmor™ style cable assemblies. Designed for rugged environments and outdoor usage. The R71-32+S132+S1-00457 is 18 inches in length and operates to 36 GHz with Rosenberger’s SMA+ connectors compatible with standard SMA, 3.5 mm and 2.92 mm connectors. Return loss is a minimum of 18 dB while insertion loss is only 0.75 dB/ft. 

RFMW Ltd. announces design and sales support for a low noise amplifier (LNA) with integrated bypass switch. Operating from 1.5 to 4 GHz, the Qorvo TQL9063 provides 0.7 dB noise figure and up to 19 dB of gain through the amplifier. When gain is not needed, a bypass switch is offered which automatically turns off the LNA for power savings.

RFMW Ltd. announces design and sales support for a 3-stage, high gain amplifier designed for ease-of-use in point to point radio systems. Featuring a frequency range of 9.5 to 12 GHz, the Qorvo TGA2760-SM offers 33 dB of gain from its 3-stage configuration. P1dB is up to 38 dBm while Psat is rated at 42 dBm. The TGA2760-SM is equipped with an integrated power detector and requires no external matching components.

RFMW Ltd. announces design and sales support for a surface mount GaN power amplifier from Qorvo. The Qorvo TGA2975-SM offers 12 W of saturated output power from 2.7 to 3.5 GHz. Small signal gain is >31 dB and input return loss is rated at >9 dB. The TGA2975-SM draws 175 mA from a 20 to 32 V bias supply with >52% power added efficiency (PAE).

RFMW Ltd. announces design and sales support for a SPDT RF switch spanning a frequency range of 20 MHz to 6 GHz. The Skyworks SKY13587-378LF offers 0.35 dB insertion loss and 24 dB of isolation for transmit/receive applications in 2 G or 5 G WiFi, IoT systems and general purpose switching. Extended temperature range of -40 to +105 degrees C allows the SKY13587-378LF to serve industrial lighting and outdoor applications.

RFMW Ltd. announces design and sales support for a 5 G front end module (FEM). The Qorvo RFFM4554 integrates a high linearity SPDT RF switch with a low noise amplifier (LNA) having bypass capability. The LNA receive gain is 13.5 dB with noise figure rated at a very low, 1.7 dB. With frequency coverage from 4.9 to 5.925 GHz, the Qorvo RFFM4554 supports 5 G WiFi CPEs, gateways and set top boxes.

RFMW Ltd. announces design and sales support for a single-pole, three-throw (SP3T) switch. The Skyworks SKY13586-687LF offers versatility in low power applications such as WiFI, Bluetooth and WLAN systems operating between 2.4 and 2.5 GHz. Useful as an antenna T/R switch, the SKY13586-687LF offers excellent linearity (P0 .1dB of 29 dBm) with 35 dB of isolation and only 0.75 dB of insertion loss.

RFMW Ltd. announces design and sales support for a broad band digital step attenuator (DSA) useful in LTE infrastructure and repeater applications. The Qorvo QPC3223 serves designs from 50 MHz to 6 GHz with 18 dB of attenuation range. Two steps, 6 and 12 dB, are selected individually or together via a parallel control interface providing 6, 12 or 18 dB of attenuation. 

RFMW Ltd. announces design and sales support for a single pole, double throw (SPDT) switch. The Skyworks SKY13585-679LF supports transmit/receive applications from 1 to 6 GHz such as WLAN networks, WiFi, repeaters, ISM band radios, Bluetooth and connectivity modules. Capable of operating from 1.8 or 3.3 V control logic without degrading power handling, the SKY13585-679LF has a P0 .1 dB point of 31 dBm.

RFMW Ltd. announces design and sales support for a SPDT RF switch with input IP3 (IIP3) of 76 dBm and second harmonic of -106 dBc at 1980 MHz. The Qorvo QPC1022 is designed for low distortion requirements in LTE infrastructure, repeaters and data cards operating from 5 to 6000 MHz. Isolation between RF ports is 39 dB while insertion loss is only 0.25 dB.

RFMW Ltd. announces design and sales support for a 200 W CW power transistor from Ampleon. The CLF1G0035S-200P GaN HEMT is usable from DC to 3.5GHz for broadband applications in wireless infrastructure, public mobile radios, jammers and Radar. The Ampleon CLF1G0035S-200P offers up to 11 dB of associated gain in CW applications or 14 dB of gain in pulsed applications. The transistor draws only 300 mA in class AB configurations with 44% typical efficiency.

RFMW Ltd. announces design and sales support for a small cell duplexer. The Qorvo TQQ7101 BAW technology offers high isolation for LTE Band 1 uplink (1950 MHz) and down link (2140 MHz) filter requirements in base stations, repeaters, signal boosters and small cells. With full 60 MHz bandwidth, in band insertion loss is only 3.7 dB while UL/DL attenuation is up to 44 dB. The TQQ7101 requires no external matching and handles 29 dBm of power.

RFMW Ltd. announces design and sales support for a GaN power amplifier. The Qorvo TGA2218-SM offers 12 W of saturated output power from 13.4 to 16.5 GHz. Small signal gain is >28 dB while large signal gain is >23 dB. The TGA2218-SM draws 225 mA from a 28 V supply with 29% power added efficiency (PAE). Serving Commercial VSAT, Military Satcom, Radar and Data Link applications, the TGA2218-SM comes in a 5.5 x4.5 mm, air-cavity QFN package.

RFMW Ltd. announces design and sales support for model P1AD-BNMM from P1dB. The P1AD-BNMM is a BNC male to BNC male adapter offering a miniature, quick connect/disconnect for commercial RF applications. Operating up to 3 GHz in a 50 ohm environment, the adapter’s body is nickel plated zinc while the center contacts are gold plated brass. The P1AD-BNMM features a maximum VSWR or 1.2:1.

RFMW Ltd. announces design and sales support for high gain, high linearity power amplifiers designed for ‘small cell’ applications. The Skyworks SKY66185-11 provides 38 dB of gain for LTE radios operating in the 851 to 894 MHz frequency range (B5, B6, B18, B19, B26, B27). Designed for high linearity at elevated temperatures, the SKY66185-11 supports outdoor applications where ambient temperatures range from -40 to +85 degrees C. Typical ACLR performance is -50 dBc at 23 dBm.

RFMW Ltd. announces design and sales support for a small cell duplexer. The Qorvo TQQ6107 BAW technology offers high isolation for LTE Band 7 uplink (2535 MHz) and down link (2655 MHz) filter requirements in base stations, repeaters, signal boosters and small cells. With full 70 MHz bandwidth, in band insertion loss is only 3.4 dB while UL/DL attenuation is up to 48 dB. The TQQ6107 requires no external matching and handles 29 dBm of power.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE42421, a low cost, high performance SPDT switch. The PE42421 operates from 10 MHz to 3 GHz with insertion loss as low as 0.35 dB and isolation as high as 30 dB between ports. The input 1 dB compression point is dependent on voltage and as high as 33.5 dBm. Input IP3 is 55 dBm. Peregrine’s PE42421 low cost switch finds applications in RFID, home networking, small cells and WiFi.

RFMW Ltd. announces design and sales support for broadband, omni-directional whip antenna from Southwest Antennas. The model 1000-029 covers the frequency band of 225 to 512 MHz for broadband radio applications where rugged antenna options are required. The Southwest Antennas’ 1000-029 is fully potted and waterproof to 20 meters when installed, yet is lightweight (1.9 oz) and highly flexible. The TNC male connector is black chrome plated and the antenna is black polyolefin.

RFMW Ltd. announces design and sales support for a GaN power amplifier. The Qorvo QPA2237 offers 10 W of saturated output power from 30 MHz to 2.5 GHz. Small signal gain is >18.5 dB while large signal gain is >13 dB. The QPA2237 draws 360 mA from a 32 V supply with 48% power added efficiency (PAE). Serving electronic warfare (EW), radar and communications markets, the QPA2237 comes in a 4 x 4 mm, plastic overmold QFN package.

RFMW Ltd. announces design and sales support for a small cell duplexer. The Qorvo TQQ6103 BAW technology offers high isolation for LTE Band 3 uplink (1747.5 MHz) and down link (1842.5 MHz) filter requirements in base stations, repeaters, signal boosters and small cells. With full 75 MHz bandwidth, in band insertion loss is only 4.1 dB while UL/DL attenuation is 44 dB. The TQQ6103 requires no external matching and handles 29 dBm of power.

RFMW Ltd. announces design and sales support for high gain, high linearity power amplifiers designed for ‘small cell’ applications. The Skyworks SKY66186-11 provides 38 dB of gain for LTE radios operating in the 728 to 768 MHz frequency range (B12, B13, B14, B17). Designed for high linearity at elevated temperatures, the SKY66186-11 supports outdoor applications where ambient temperatures range from -40 to +85 degrees C.

RFMW Ltd. announces design and sales support for a single-chip front end module serving battery powered or portable applications such as wireless meter reading and smart energy. The Qorvo RFFM6900 covers the 900 MHz ISM band (890 to 960 MHz) with up to 1 W of transmit power. Integrated into the FEM is a PA, SP3T antenna switch, transmit harmonic filter, transmit through path, LNA with bypass mode and matching components for 50 ohm I/O.

RFMW Ltd. announces design and sales support for model QPA3240 from Qorvo. The QPA3240 supports DOCSIS 3.1 CATV amplifier designs with up to 24.5 dB gain from 45 to 1218 MHz. Superior return loss performance and extremely low distortion (CSO = -76 dBc and CTB = -73 dBc) characterize the QPA3240 which combines the advantages of both GaAs and GaN for excellent linearity and high output capability of 62 dBmV.

RFMW Ltd. announces a 1 W linear amplifier targeting small cell base stations, repeaters and boosters. Operating from 1.8 to 2.7 GHz, the Qorvo TQP9113 provides up to 30.6 dBm P1dB with >27 dB of gain. With excellent linearity, OIP3 is measured at 41 dBm. The TQP9113 draws only 215 mA from a 5 V supply and integrates inter-stage matching and input matching with a shutdown mode for a less complicated design implementation and increased link range.

RFMW Ltd. announces design and sales support for the RF circulator isolator, (RFCI) model RFCR8801 circulator. The RFCR8801 covers the full S-band (2-4GHz) in a drop-in package configuration. Broadband performance is outstanding with typical  insertion loss <0.5 dB and >19 dB isolation. Forward power handling is rated at 50 W average and 500 W peak. Reverse power handling is 30 W CW.

RFMW Ltd. announces design and sales support for the API Weinschel 7006-1 DC block. The 7006-1 is an ‘inside’ DC block containing capacitance in-series with the center conductor to prevent the flow of DC current while permitting RF power to flow uninterrupted. The 7006-1 passes RF from 9 kHz to 20 GHz with an SWR of 1.3:1. API Weinschel rates the power handling at 20 W averages and 100 W peak. Maximum DC voltage is 50 V.

RFMW Ltd. announces design and sales support for the Qorvo 885075 BAW filter featuring LowDrift technology. LowDrift BAW filters have dramatically reduced temperature sensitivity resulting in improved insertion loss, longer battery life, and fewer service interruptions in final designs. The Qorvo 885075 is highly selective for B40 applications from 2300 to 2400 MHz and offers excellent W-Fi rejection. Insertion loss is 3 dB and Wi-Fi attenuation is specified at 34 dB.

RFMW Ltd. announces design and sales support for a dual, low noise amplifier (LNA) from Qorvo. The TQL9066 incorporates two, matched, E-pHEMT LNAs enabling balanced amplifier configurations with noise figure rated at 0.6 dB. Applicable for the first stage in receivers, the Qorvo TQL9066 finds homes in BTS transceivers, L-Band radios and tower mounted amplifiers operating from 0.05 to 1.5 GHz.

RFMW Ltd. announces design and sales support for a series of 6 GHz attenuators with electrically equivalent group delay. The P1AT-SAMF-6G2W series attenuators from P1dB, Inc. offer a cost effective solution for amplitude balancing parallel signals of varying RF power. Attenuation values range from 0 to 10 dB in 1dB steps along with values of 12, 15, 20, 30 and 40 dB.

RFMW Ltd. announces design and sales support for two body worn antennas from Southwest Antennas. Model 1065-028 is a right-hand, circularly polarized (RHCP) antenna while model 1065-029 offers left-hand polarization (LHCP). Developed to offer a high performance, rugged antenna option, the antenna radome housing is resistant to damage from drops, being stepped or jumped on, and other potential abuse.

RFMW Ltd. announces design and sales support fora 1000 W pulsed power transistor. Ampleon’s BLA6H0912LS-1000 offers excellent ruggedness for avionics applications such as Mode-S, TCAS, JTIDS, DME and TACAN applications in the 960 to 1215 MHz frequency range. The BLA6H0912LS-1000 has integrated ESD protection and excellent thermal stability. It is highly flexible with respect to pulse formats with typical rise and fall times of 11 and 5 nS respectively. Typical gain is 16 dB.

RFMW Ltd. announces design and sales support for the Delta Electronics Manufacturing 1313000G051-000, an 18 GHz SMA female, four-hole, flange mount connector with solder cup. Produced for commercial, industrial, and military applications where a quality SMA interconnect is required, the 1313000G051-000 connector body is stainless steel with gold plating per MIL-G-45204 and houses a Teflon dielectric. The center contact is gold plated.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE4314, a 75 ohm digital step attenuator (DSA) spanning a frequency range of 1 to 2500 MHz. The PE4314 offers 6-bit resolution with 0.5 dB steps providing 31.5 dB attenuation range. Its low distortion characteristics and 75 ohm circuit optimization make it ideal for CATV and multi-carrier applications. This DSA features Peregrine’s Glitch-less technology reducing attenuation state transitions to <0.5 dB.

RFMW Ltd. announces design and sales support for the Qorvo TGA2813-SM, a 3.1 to 3.6 GHz GaN amplifier providing 100W of saturated output power. With 24 dB of large signal gain and power added efficiency of 56%, the TGA2813-SM is ideal for commercial and military radar systems. The small, surface mount package measures 7 x 9 mm and is housed in a plastic QFN. Bias requirements are only 300 mA from a 30 V supply.

RFMW Ltd. announces design and sales support for the TGL2927-SM, a 200 W (pulsed) limiter for radar applications in the 2 to 4 GHz band. Manufactured by Qorvo using VPIN technology, the TGL2927-SM offers low insertion loss of <0.6 dB with a high return loss of 15 dB. With a low flat leakage rate of <18 dBm, this limiter protects receive chains in both commercial and military S-band radar. 

RFMW Ltd. announces design and sales support for two Skyworks 75 ohm switches serving set top box (STB) applications. The SKY13547-490LF and SKY13548-385LF SPDT switches support both forward and reverse path applications for DOCSIS 3.0 and DOCSIS 3.1 with a frequency range of 5 to 1800 MHz. High linearity typifies these switches as well as low insertion loss (0.3 dB for the SKY13547-490LF and 0.4 dB for the SKY13548-385LF) and high input and output return loss of 20 dB.

RFMW Ltd. announces design and sales support for the MiniRF MRFXF0032 transformer. The MRFXF0032 is an unbalanced to balanced design with a 1:1 impedance ratio. Configured as a transmission line transformer, it covers a frequency range of 45 to 1200 MHz with superior insertion loss of 0.4 to 0.6 dB across this band width thereby supporting applications where power and noise figure are critical in the circuit design.

RFMW Ltd. announces design and sales support for two Skyworks low noise amplifiers (LNAs) for set top box (STB) applications. The SKY65450-92LF and SKY65452-92LF both provide high linearity (28.4 dBm OIP3) and excellent gain (15 dB) over a wide bandwidth of 40 to 1000 MHz. Characterized for 75 ohm environments, both devices are applicable to cable modems, home gateways, PVRs, DVRs, and terrestrial/cable set top boxes.

RFMW Ltd. announces design and sales support for Qorvo’s RFVC6405 voltage controlled oscillator. The RFVC6405 covers the full 2 to 4 GHz (S-band) in a single device with exceptional performance. Output phase noise is -90 dBc at 10 K offset (typ.) with second harmonic suppression of -15 dBc. With an output power of 0 dBm, the RFVC6405 draws 25 mA from a 5 V supply. Tuning voltage is 0 to 16 Vdc.

RFMW Ltd. announces design and sales support for the MiniRF MRFXF0024, a 1:1 impedance ratio, transmission line transformer covering frequencies from of 45 to 1200 MHz. Capable of supporting DOCSIS3.1 requirements, the MRFXF0024 is designed for applications requiring low loss and where noise figure (NF) concerns are critical.  Characteristic impedance is 75 ohms and insertion loss ranges from 0.4 dB for return path applications to 0.6 dB for downstream circuits.

RFMW Ltd. announces design and sales support forAmpleon’s BLM8G0710S-30PBG, a dual section, 2-stage power MMIC targeted as a general purpose driver or final stage amplifier in white space or ISM applications in the 700 to 1000 MHz frequency range. The BLM8G0710S-30PBG offers >51% typical drain efficiency and offers on-chip matching for ease of use. Ampleon designers integrate internal ESD protection for enhanced reliability.

RFMW Ltd. announces design and sales support for API Technologies’ 345C single channel rotary joint. API rotary joints are used to transmit RF energy from a stationary RF source to a rotating RF line and find applications in military and commercial markets such as mobile satellite communication systems, radar systems including civil air traffic control, weather radars or anywhere rotational force might damage a transmission line.

RFMW Ltd. announces design and sales support for a transformer from MiniRF. The MiniRF MRFXF0025 is a 1:1 impedance ratio, transmission line transformer covering a frequency range of 45 to 1200 MHz. Capable of supporting DOCSIS3.1 requirements, the MRFXF0025 is designed for applications that require superb gain balance. Characteristic impedance is 75 ohms and insertion loss ranges from 0.7 to 0.8 dB across the device band width. 

RFMW Ltd. announces design and sales support for the QPQ1291, a highly selective, low drift, BAW filter for full Band 41 TDD-LTE Tx/Rx. The Qorvo QPQ1291 has excellent WiFi rejection of 39 dB at WiFI channel 11, yet only 3.8 dB in-band insertion loss. Performance is rated over -20 to +85 degrees Celsius. Available in a RoHS compliant, 2.0 x 1.6 mm SMT package, return loss of the QPQ1291 is 9 dB.

RFMW Ltd. announces design and sales support for a high linearity amplifier. The Qorvo TQP9421, internally matched small cell PA offers 27 dBm of linear power (-50 dBc ACLR) with 30 dB of gain. Drawing 450 mA from a 4.5 V supply, the TQP9421 lends itself towards distributed amplifier systems (DAS), small cell infrastructure and repeaters. The Qorvo TQP9421 is capable of 35.5 dBm P1dB from 2.11 to 2.17 GHz.

RFMW Ltd. announces design and sales support for the 365CT000, 40 A pulsed switch from XSYSTOR, Inc.  The 365CT000 offers easy integration of GaN amplifiers in high speed, pulsed power systems. These CMOS, complementary MOSFET switches have clocked speeds of <200 nSec for rise and fall times. Allowing source and drain voltages from 28 to 80 V, the XSYSTOR switch is compatible with standard and high voltage GaN amplifiers and transistors.

RFMW Ltd. announces design and sales support for the Qorvo TGA2818-SM power amplifier. The TGA2818-SM provides 30 W of saturated output power for S-band radar systems operating over 2.8 to 3.7 GHz. Large signal gain is >18 dB with power added efficiency of >47%. This 2-stage, GaN on SiC amplifier runs on 28 V bias drawing 200 mA of current. The Qorvo TGA2818-SM has good thermal properties and supports a range of bias voltages.

RFMW Ltd. announces design and sales support for an internally matched amplifier from Qorvo. The Qorvo TQP9418 spans a frequency range of 1.805 to 1.88 GHz with an output power 27.5 dBm. The TQP9418 offers a best in class linearity of -48 dBc ACLR at 27.5 dBm. With 31 dB of gain, the TQP9418 draws 455 mA from a 4.5 V supply. Applicable for small cell base stations, booster amplifiers and repeaters.

RFMW Ltd. announces design and sales support for the Qorvo TQP9221, a 2.01 to 2.17 GHz linear amplifier for use in enterprise femtocells, CPE and distributed antenna systems. The TQP9221 offers over 30 dB of gain and is internally matched for design ease while drawing 225 mA from a 4.5 V supply. 

RFMW Ltd. announces design and sales support for SMA terminated coaxial pigtail cable assemblies from P1dB. The P1CA-SAFPT-034SR-2 is one of a family of pigtail cables that include semi-rigid, conformable and jacketed conformable cable styles. P1dB pigtails are commonly used to inject or sample RF signals during prototyping or testing of RF circuits by simply soldering the unterminated cable end onto a pin, copper trace or test pad.

RFMW Ltd. announces design and sales support for Skyworks dual-band, internally matched, SP4T switch developed for WiFi applications in the 2.4 and 5 GHz ISM bands. The Skyworks SKY13575-639LF supports access points and CPEs along with WLAN test and measurement equipment. Frequency coverage is from 100 MHz to 6 GHz with a maximum insertion loss of 1.4 dB. Isolation ranges from 26 to 40 dB and the SKY13575-639LF can handle up to 32 dBm of input power.

RFMW Ltd. announces design and sales support for Skyworks high isolation switches developed for IoT (Internet of Things) applications. The family features the SKY13522-644LF SPDT, the SKY13523-639LF SP3T and SKY13524-639LF SP4T. All 3 switches support operation from 700 to 3000 MHz. Designed using SOI processing, these switches consume less than 10 uA of current. Built-in decoders limit the number of GPIO lines needed for control.

RFMW Ltd. announces design and sales support for the PE4152, a high linearity RF mixer from Peregrine Semiconductor. Designed for land mobile radio (LMR) and cellular infrastructure up to 1 GHz, the PE4152 offers two operating modes: LO enable and LO bypass. LO enable provides 25 dBm IIP3 with 52 dBm IIP2. LO bypass provides 24 dBm IIP3 with 46 dBm IIP2. Both modes provide low conversion loss of 6.5dB.

RFMW Ltd. announces design and sales support for the Qorvo TQL9093 ultra low noise amplifier featuring flat gain. Capable of operation from 600 to 4200 MHz, the TQL9093 is optimized for wireless infrastructure applications spanning 1500 to 4000 MHz and offers >19 dB of gain +/-0.5 dB over this span. Midband OIP3 is 41.5 dBm while noise figure is as low as 0.54 dB.

RFMW Ltd. announces design and sales support for the Qorvo TQL9062, an internally matched, LNA gain block suitable for applications spanning 0.5 to 6 GHz. The TQL9062 features a ‘shutdown’ mode requiring 1.8 V TTL logic and supporting both TDD and FDD systems such as repeaters, DAS, defense communications and infrastructure applications where efficiency and range are important. Noise Figure is noted as 1.5 dB while mid-band gain is 15.5 dB and OIP3 is >40 dBm.

RFMW Ltd. announces design and sales support for the Qorvo TQP9218, a quarter watt (24.5 dBm) and highly efficient power amplifier covering 1805 to 1880 MHz. ACLR at 24 dBm is -48 dBc. The TQP9218 is internally matched for ease of design and offers good linear performance without the need for linearization. Running from a nominal 4.5 V supply, the TQP9218 draws 240 mA and boasts 16% PAE while offering 31 dB of gain.

RFMW Ltd. announces design and sales support for the PE42723 UltraCMOS SPDT RF switch from Peregrine Semiconductor. Achieving -121 dBc second harmonic and -140 dBc third harmonic at 17 MHz, the PE42723 exceeds the linearity requirements of the DOCSIS 3.1 cable industry standard and enables a dual upstream/downstream band architecture in cable customer premises equipment (CPE) devices spanning 5 to 1794 MHz.

RFMW Ltd. announces design and sales support for an AEC-Q200 qualified bulk acoustic wave (BAW) filter designed for 2.4 GHz WLAN/WiFi/blue tooth coexistence with 4G LTE and TD-LTE signals. The Qorvo 885071-A offers high rejection in adjacent bands B7, B38, B40 and B41 allowing these various technologies to operate simultaneously and in close proximity. Qorvo’s 885071-A has a usable bandwidth of 100 MHz (2400 to 2500 MHz).

RFMW Ltd. announces design and sales support for the Qorvo TGA2752-SM, QFN packaged 10 W power amplifier operating from 7.1 to 8.5 GHz. The TGA2752-SM provides 28 dB of gain and contains an integrated power detector. No external matching components are required, easing design in point to point amplifiers and C-band linear satellite communication systems.

RFMW Ltd. announces design and sales support for two Skyworks Inc. high power, PIN diodes suitable for T/R and attenuator applications. The SMP1331-085LF (shunt connected) and SMP1331-087LF (series connected) diodes are capable of handling 50 W CW power in a shunt connected switch configuration. Large signal attenuator applications ranging from 10 MHz to beyond 6 GHz are also possible. 

RFMW Ltd. announces design and sales support for a 10 W GaN power amplifier providing broadband coverage from 6 to 18 GHz. The Qorvo TGA2574 boasts 20 dB of small signal gain and operates from a 28 V supply drawing 1.5 A. PAE is >15%. The Qorvo TGA2574 serves EW, radar and instrumentation markets and provides world-class power / PAE / gain versus bandwidth. 

RFMW Ltd. announces design and sales support for the Qorvo TGF3021-SM GaN transistor offering  over 30 W of P3 dB output power. Functioning from 30 MHz to 4 GHz, the TGF3021-SM is a discrete GaN on SiC HEMT supporting multiple high power applications such as LMR radio, commercial and military radar, RF jammers and test instrumentation. Capable of both CW and pulsed performance, typical PAE is 72.7%. 

RFMW Ltd. announces design and sales support for the Qorvo TGA2239-CP high power MMIC amplifier offering 35 W of saturated CW output power for Ku-band applications. The Qorvo TGA2239-CP operates from 13.4 to 15.5 GHz with power added efficiency of >34% and small signal gain of 25.5 dB. Processed using GaN on SiC technology, the TGA2239-CP draws 900 mA from a 22 V supply.

RFMW Ltd. announces design and sales support for Qorvo’s TGA2214-CP, a broadband, 2 to 18 GHz GaN amplifier. Providing 4 W of saturated output power, the TGA2214-CP offers 22 dB of small signal gain and 13 dB of large signal gain. PAE is specified at >15% and the bias requirements are 22 V with 600 mA. The TGA2214-CP finds applications in EW, radar and test and measurement.

RFMW Ltd. announces design and sales support forAmpleon’s BLF10M6200, a 200 W LDMOS power transistor targeted for ISM applications from 700 to 1000 MHz. The BLF10M6200 offers 28.5% typical drain efficiency and is internally matched for ease of use. It is designed for ruggedness in class-AB operation and capable of withstanding a load mismatch of 10:1 through all phases.

RFMW Ltd. announces design and sales support for XMA Corporation’s, 18 GHz coaxial attenuators with SMA male to SMA female connectors.  The XMA part number series, 2082-604y-xx, follows the Omni Spectra® product sequence. These SMA 18GHz attenuators are available in standard dB values of 3,6,10, 20 and 30 dB with a 2 W CW input power and a 500 W peak power rating.  The overall length of the XMA SMA coaxial attenuators are .086" for 3, 6 and 10 dB and 1.02" for 20 and 30 dB.

RFMW Ltd. announces design and sales support for two global navigation low-noise amplifiers (LNAs) from Skyworks Solutions.  The SKY65605-21 and SKY65611-11 are both designed for BeiDou/GPS/GLONASS/Galileo receiver applications and are optimized to operate from 1559 to 1606 MHz. Improving GPS system sensitivity, external LNAs overcome filter losses and provide faster first fix time.

RFMW Ltd. announces design and sales support for SMA connectored Directional Couplers from P1dB operating from 2 to 4 GHz. The P1CP-SAF-0204G series are available in 10 dB (P1CP-SAF-0204G10W-10), 20 dB (P1CP-SAF-0204G50W-20) and 30 dB (P1CP-SAF-0204G50W-30) coupling factors. The P1CP-SAF-0204G10W-10will handle input power levels as high as 10 W while the P1CP-SAF-0204G50W-20and P1CP-SAF-0204G50W-30handle up to 50 W for multiple applications.

RFMW Ltd. announces design and sales support for a 3 x 3 mm, leadless packaged, through line. The Qorvo TQQ7399 offers PCB designers the flexibility of an RF bypass path that can be used in conjunction with other devices or stand alone to jump existing surface traces. Capable of operation from DC to 2700 MHz, the TQQ7399 has a typical insertion loss of only 0.15 dB while return loss is 25 dB into 50 ohms. Maximum power handling is +20 dBm.

RFMW Ltd. announces design and sales support for a 1 W power amplifier from Qorvo. The TGA4537-SM operates from 29 to 35 GHz with an integrated power detector for power monitoring. Requiring no additional matching components, the Qorvo TGA4537-SM serves point-to-point radio and Ka-band satellite applications with 18 dB of gain. The TGA4537-SM draws 1100 mA from a 6 V supply with a Psat of 31dBm.

RFMW Ltd. announces design and sales support for Qorvo’s 857271 SAW filter for 3G/4G infrastructure intermediate frequency (IF) circuits. Insertion loss of the 857271 is only 11 dB, nearly half the loss of similar performance SAW filter options. With a usable bandwidth of 39.6 MHz, the 857271 also supports general purpose wireless applications where low EVM (3%) is desirable.

RFMW Ltd. announces design and sales support for Carlisle Interconnect Technologies enhanced performance H5610 series, SMA field replaceable connectors. The H5610 series provides mode free performance to 27 GHz. Low RF leakage (less than 90 dB) is combined with ultra-low VSWR performance (typically 1.15:1) to 27 GHz. The enhanced performance H5610 SMA connector series offers backside interfaces for various pin sizes.

RFMW Ltd. announces design and sales support for Qorvo’s TGA2595-CP, a 27.5 to 31GHz gallium nitride (GaN) power amplifier serving VSAT  and SatCom applications. The TGA2595-CP offers 8 W of Psat power with a PAE of 22%. Small signal gain is >25 dB. A balanced configuration supports low return loss and improves robustness into non-ideal loads. Drawing 560 mA from a 20 V supply, the Qorvo TGA2595-CP comes in a copper based, flange package. 

RFMW Ltd. announces design and sales support for Qorvo’s 857182 duplexer for Band 17 LTE. Meeting the strict requirements for LTE, the 857182 SAW duplexer offers high rejection. The 710 MHz uplink filter has 45 dB attenuation in the downlink band while the 740 MHz downlink filter offers 50 dB attenuation in the uplink band. Insertion loss is rated at 2.5 dB and usable bandwidth is 12 MHz.

RFMW Ltd. announces design and sales support for an ultra-broadband 2-way SMA power divider operating from 1 to 18 GHz. P1dB, Inc. provides the P1PD-SAF-0118G30W-2 as an off-the-shelf item from their vast inventory of in-stock devices. The P1PD-SAF-0118G30W-2 is a Wilkinson design capable of handling 30 W of continuous wave RF power. Maximum insertion loss is 1.0 dB per path. 

RFMW Ltd. announces design and sales support for a Ka-band amplifier with 1 W output power. Qorvo’s TGA4544-SM supports 28 GHz, point-to-point radio and Ka-band linear satellite communication systems in the 26 to 31 GHz frequency range. Available in a 5 x 5 mm QFN package, the TGA4544-SM has 23 dB of gain, a P1dB of 31 dBm and Psat of 32 dBm. OIP3 is rated at 41 dBm. Qorvo has designed this PA for ease-of-use so no matching components are required. 

RFMW Ltd. announces design and sales support for XSYSTOR controller modules used for operation and protection of depletion mode transistors. Primarily designed for GaN devices, controllers like the 200X02R0 protect GaN transistors during the power On/Off sequence of internal and external voltage supplies. The 200X02R0 is an inverting controller.  TTL enable for both gate and drain switching are independent or made sequential for stability purposes.

RFMW Ltd. announces design and sales support for Qorvo’s TGF2965-SM, 50 ohm, input-matched transistor. The TGF2965-SM offers 5 W of output power from 30 to 3000 MHz. Qorvo’s TGF2965-SM can be tuned for either power or efficiency and performance of both is exceptional. Typical PAE at 2 GHz is 63%. Linear gain is measured at 18 dB. Operating from a 32 V supply, this transistor is capable of both CW and pulsed performance.

RFMW Ltd. announces design and sales support for a LowDrift™ BAW filter created for Band 25 repeater uplink applications centered at 1882.5 MHz. Qorvo’s 885048 has 65 MHz of usable bandwidth and can handle up to 1 W of RF input power. Featuring a low insertion loss of 2.3 dB max, the Qorvo 885048 offers single-input, single-output operation. No external matching components are required which simplifies circuit design.

RFMW Ltd. announces design and sales support for the RFaxis RFX2411N, a fully integrated, single-chip, single-die RFeIC (RF Front-end Integrated Circuit) incorporating all the RF functionality needed for wireless ZigBee/smart energy applications. Designed for operation in the 2.4 GHz ISM band, the RFX2411N architecture integrates a PA, LNA, transmit and receive switching circuitry.

RFMW Ltd. announces design and sales support for the PE42422 UltraCMOS SPDT RF switch from Peregrine Semiconductor. The enhanced frequency range of the PE42422 pushes down to 5 MHz providing broadband performance from 5 to 6000 MHz. Typical insertion loss of 0.25 dB at 1000 MHz with 44 dB isolation is maintained. This reflective switch integrates on-board CMOS control logic requiring no external components. 

RFMW Ltd. announces design and sales support for 65 GHz coaxial attenuators using 1.85 mm connectors. P1dB offers a series of these attenuators with available fixed attenuation values of 3 dB, 6 dB, 10 dB, 20 dB and 30 dB. With a maximum VSWR of 1.35:1, these P1dB attenuators find applications in test and measurement production environments and optical networking. The table below defines the part numbers for the associated fixed values.

RFMW Ltd. announces design and sales support for the API Weinschel 1515-1 resistive power divider. The 1515-1 offers SMA female connectors on all ports allowing a miniature design that’s capable of supporting 18 GHz applications. Rated at 1W CW, the API Weinschel divider can handle up to 1 kW peak power input. Phase tracking between ports is 5 degrees maximum while amplitude tracking is 0.5 dB max at 18 GHz. Insertion loss beyond the 6 dB nominal is only 1.5 dB at 18 GHz.

RFMW Ltd. announces design and sales support for a bulk acoustic wave (BAW) filter designed for 2.4 GHz WLAN/WiFi/Blue Tooth coexistence with 4G LTE and TD-LTE signals in adjacent bands B7, B41, B38 and B40. The Qorvo 885128 exhibits exceptional rejection performance allowing these various technologies to operate simultaneously and in close proximity. and offers up to 25% less temperature drift with extended temperature ranges of -40 to +95 degrees C.

RFMW Ltd. announces design and sales support for the SKY67159-396LF, a 200 to 3800 MHz LNA designed for applications including IoT, small cell infrastructure, tower mounted amplifiers and remote radio units. The SKY67159-396LF’s thermal characteristics allow in-system performance up to +105 degrees C. Broadband performance is achieved with a single matching circuit providing superior gain flatness, low noise figure (<1 dB) and good linearity (31 dBm OIP3).

RFMW Ltd. announces design and sales support for XMA Corp’s 8582-6150-xx series of 2.4 mm, 50 GHz Attenuators.  The XMA coaxial attenuators are available in standard dB values of 3, 6, 10, 20 and 30 dB and handle up to 1 W of power. Frequency DC - 50 GHz, VSWR ranges 0 to 26.5 GHZ to 40 to 60 GHz and operating temps are -55 to +100. The 50 GHz attenuators are in stock at RFMW and are ready to ship the same day.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE42920 dual differential SPDT switch operating from 10 kHz to 6 GHz. The PE42920 targets test and measurement applications where two independent differential signals are required to be switched. Having both switches in a small, 3 x 3 mm QFN package saves both board space and BOM cost as well as improving performance.

RFMW Ltd. announces design and sales support for two DOCSIS 3.1 compliant power doubler amplifiers from Qorvo. The RFPD3210 and RFPD3220 are hybrid GaAs/GaN devices offering excellent linearity and low distortion. Designed for 45 to 1218 MHz CATV amplifier systems, the RFPD3210 and RFPD3220 also offer high gain of 22.5 and 24.5 dB respectively. Low noise figure of 3 dB punctuates the performance of these Qorvo power doublers.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE42822 high power SPDT RF switch operating from 700 MHz to 3.8 GHz utilizing UltraCMOS^® SOI technology. With 65 dBm of IIP3 linearity and 120 dBm IIP2, the PE42822 is ideal for LTE receiver applications in microcells and picocells. This Peregrine switch boasts a 3 kV HBM ESD performance and supports extended temperature operation up to 105 degrees C.

RFMW Ltd. announces design and sales support for API Technologies phase shifters designed for applications in optical communication systems. The precision adjustments on the OPS-0002 phase shifter allow enhanced resolution and accuracy setting. The API OPS-0002 is offered with precision 2.4 mm female connectors and operates up to 50 GHz. The micrometer adjustment allows for 28 turns. Each turn provides a minimum of 4 pico-seconds time delay.

RFMW Ltd. announces design and sales support for two power amplifier modules supporting 5 GHz Wi-Fi enabled CPEs, routers, pico cells and femto cells. The Qorvo RFPA5522 supports applications from 5.18 to 5.925 GHz with bias configurable to 5 or 3.3 V operation. The Qorvo RFPA5542 extends operation from 4.9 to 5.925 GHz and is optimized for the least number of external components on compatible reference designs.

RFMW Ltd. announces design and sales support for API Technologies’ 305W single channel rotary joint. The API rotary joint is used to transmit RF energy from a stationary RF source to a rotating RF line. The 305W operates from DC to 12.4 GHz through type N coaxial connectors. VSWR is as low as 1.15:1. Rotary joints have inherently low insertion loss as evidenced by the 305W with loss ranging from <0.2 dB below 6 GHz to <0.3 dB below 12.4 GHz.

RFMW Ltd. announces design and sales support for the Qorvo TGA2227, a 2 to 22 GHz low noise amplifier fabricated on Qorvo’s TQGaN15 GaN on SiC process. The Qorvo TGA2227 can also be used as a driver with >15 dB of small signal gain or a general amplifier with >20 dBm P1dB. With a nominal drain voltage of 8 V, the TGA2227 can be biased over a wide range of voltages with little impact on noise figure and gain

RFMW Ltd. announces design and sales support for Qorvo's TQL9092, a flat-gain, high-linearity, ultra-low noise amplifier (LNA). The TQL9092 provides 2 dB (peak-to-peak) gain flatness from 1.5 to 3.6 GHz.Typical gain is 22.6 dB and OIP3 is 39.5 dBm at a 65 mA bias setting. Noise figure at this setting would be 0.6 dB. The TQL9092 can be biased from a single positive supply ranging from 3.3 to 5 volts.

RFMW Ltd. announces design and sales support for the 0.5 W QPA9119, a high linearity amplifier from Qorvo. Covering 400 to 4200 MHz, the Qorvo QPA9119 has 17 dB of gain, a P1dB of 27.2 and offers +44 dBm OIP3. The QPA9119 draws only 137 mA from a 5 V supply and is ideal for repeaters and distributed amplifier systems. Designed to support both TDD and FDD systems, the Qorvo QPA9119 comes in a 3 x 3 mm QFN package.   

RFMW Ltd. announces design and sales support for the Qorvo TQP9326, a half watt, highly efficient power amplifier covering 2.3 to 2.7 GHz (bands 7, 30, 40 and 41). The TQP9326 is a fully integrated, 50 ohm module with 34 dB of gain and designed for applications using DFE or DPD. Running from a nominal 5 V supply, the TQP9326 draws ~115 mA and boasts efficiencies as high as 22%.

RFMW Ltd. announces design and sales support for the Qorvo TQP9321, a half watt, highly efficient power amplifier covering 1.8 to 2.17 GHz (bands 1, 2, 3, 4, 9, 10 and 25). The TQP9321 is a fully integrated, 50 ohm module with 30 dB of gain and designed for applications using DFE or DPD. Running from a nominal 5 V supply, the TQP9321 draws ~100 mA and boasts efficiencies as high as 27%.

RFMW Ltd. announces design and sales support for the Qorvo TQP9309, a half watt, highly efficient power amplifier covering 700 to 960 MHz (bands 5, 6, 8, 12, 13, 14, 17, 20, 26, 27, 28 and 29). The TQP9309 is a fully integrated, 50 ohm module  with 32 dB of gain and designed for applications using DFE or DPD. Running from a nominal 5 V supply, the TQP9309 draws ~100 mA and boasts efficiencies as high as 27%.

RFMW Ltd. announces design and sales support a 2 W saturated output power driver amplifier designed to support HPA implementation from 13 to 18 GHz. The Qorvo TGA2958 is compatible with GaN HPA bias conditions allowing it to run from the same supply as the high power amplifier. The TGA2958, 3-stage driver, has a small signal gain of >25 dB yet draws only 70 mA of CW bias.

RFMW Ltd. announces design and sales support for the Qorvo TGS4310-SM single-pole, double-throw (SPDT) reflective switch. The TGS4310-SM is specified for operation from 13 to 19 GHz and features low insertion loss of <1.7 dB with isolation >20 dB. Switching speed is 20 nS and the switch control voltages are 5 V / 0 V. Capable of handling 2 W of input power, the TGS4310-SM is ideal for Ku-band Radar applications.

RFMW Ltd. announces design and sales support for an 11 to 17 GHz driver amplifier providing 25 dB of small signal gain and 19 dBm nominal P1dB. The Qorvo TGA2243-SM integrates three amplification stages in a single 4 x 4 mm QFN package with acopper alloy base. Operating from a 6 to 9 V supply, the Qorvo TGA2243-SM draws only 85 mA. Applications for the TGA2243-SM include VSAT, Point-to-Point radio and military radios in the Ku Band.

RFMW Ltd. announces design and sales support for a LowDrift^TM BAW filter created for Band 2 uplink applications centered at 1880 MHz. Qorvo’s 885053 has 60 MHz of usable bandwidth and can handle up to 2 W of RF input power. Featuring a low insertion loss of 2.8 dB max, the Qorvo 885053 offers single-input, single-output operation. No external matching components are required which simplifies circuit design.

RFMW Ltd. announces design and sales support a high dynamic range, analog controlled, variable gain amplifier (VGA) operating from 0.7 to 2.8 GHz. The Qorvo TQC9074 offers 30 dB of analog controlled gain variation range and an OIP3 of 41.5 dBm. Applications include remote radio heads and small cell infrastructure. The TQC9074 draws 235 mA from a 5 V supply. Users can access each stage of the module for performance enhancements in their design.

RFMW Ltd. announces design and sales support for low passive inter-modulation (PIM) attenuators from EMC Technology.  When comparing the new 33P7024 (100 W) series to standard attenuators the difference is typically ≥ 10 dBc.  The 33P702403.00F offers 3dB of attenuation while the 33P702430.00F offers 30dB attenuation. Designed for demanding infrastructure applications, both EMC’s 33P702403.00F and 33P702430.00F operate to 2.7 GHz.

RFMW Ltd. announces design and sales support for two highly selective, LowDriftä BAW filters created for Band 3 uplink and downlink applications. Qorvo’s TQQ0303 provides 75 MHz of usable bandwidth and up to 1 W power handling for Band 3 downlink applications. The Qorvo TQQ0302 offers similar bandwidth and power handling for Band 3 uplink. Both TQQ0303 and TQQ0302 offer single-input, single-output operation.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE42524 SPDT RF switch operating from 10 MHz to 40 GHz utilizing UltraCMOS^â SOI technology. The PE42524 offers high isolation (>48 dB midband) and low insertion loss (<1.8 dB midband). Beyond this impressive performance, the PE42524 also boasts high linearity of 31.5 dBm P1dB at 26.5 GHz. High isolation is ideal for applications in filter bank switching.

RFMW Ltd. announces design and sales support a 5-bit, 0.75 dB LSB attenuator for applications in the 10 to 20 GHz frequency range. Qorvo’s TGL2616-SM 5 bit accuracy offers an attenuation range of 23.25 dB. RMS step error is <0.3 dB while RMS attenuation error is <0.6 dB. Input IP3 for Qorvo’s digital step attenuator is rated at >36 dBm. Qorvo offers the TGL2616 as a DIE version of this device. 

RFMW Ltd. announces the availability of a LTE band definition chart outlining frequency designations and bandwidths for LTE bands 1 through 44. Both uplink and downlink information is provided along with duplex spacing information. Applicable usage areas for each band are highlighted. If you’ve ever had confusion or questions regarding the multitude of LTE bands, this chart from RFMW provides a concise resource for your desktop or design bench.

RFMW Ltd. announces design and sales support for the Qorvo TGA2239 high power MMIC amplifier offering 35 W of saturated output power for Ku-band applications. The Qorvo TGA2239 operates over 13 to 15.5 GHz with power added efficiency of >32% and small signal gain of 29.5 dB. Processed using GaN on SiC technology, the TGA2239 draws 900 mA from a 22 V supply. Applications include Radar, data links and satellite communications.

RFMW Ltd. announces design and sales support for the SKYA21001, AEC-Q100 qualified SPDT switch. Covering a frequency range of 20 MHz to 3 GHz, the SKYA21001 s ideal for military communication systems. Low insertion loss of 0.3 dB improves system performance while low DC power consumption helps maintain battery life in portable systems.  Offered in a compact, 2.0 x 1.25 mm SC-70 package, this Skyworks switch is lead-free and RoHS compliant.

RFMW Ltd. announces design and sales support for a series of voltage-controlled variable attenuators (VVAs) from Skyworks Solutions. The SKY1223x series of attenuators is suitable for applications such as repeaters, wireless backhaul and wireless infrastructure. The four attenuators in the series, SKY12232-21, SKY12233-11, SKY12235-11 and SKY12236-11, are optimized for low distortion and centered at 1.95, 2.60, 3.15 and 3.8GHz respectively.

RFMW Ltd. announces design and sales support for a high linearity, active bias, ultra low noise amplifier from Skyworks Solutions. The SKY67103-396LF offers mid-band noise figure of 0.6 dB for receiver applications requiring the lowest possible noise figure yet highly linear performance over a broad frequency range. Covering 500 to 4000 MHz, the SKY67103-396LF provides typical OIP3 of 34 dBm at 3.6 GHz for improved receiver selectivity and sensitivity.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE43713, a 7-bit digital step attenuator featuring “glitch-less” attenuation state transitions, 1.8 V control voltage support and extended operating temperature range to 105 degrees Celsius. These features, in addition to a bypass mode that improves spurious performance make the Peregrine PE43713 ideal for test and measurement applications.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE43711, a 7-bit digital step attenuator capable of maintaining 0.25 dB monotonicity through 4 GHz. Operating to 6 GHz, the PE43711 offers 0.5 dB monotonicity through 5 GHz and 1 dB monotonicity through 6 GHz. Featuring “glitch-less” attenuation state transitions, the PE43711 is ideal for 3G/4G infrastructure, land mobile radio (LMR) and point-to-point communication systems.

RFMW Ltd. announces design and sales support for NXP’s BLF2425M7LS-250P. This highly efficient (51% drain efficiency) LDMOS transistor is internally matched for broadband performance from 2400 to 2500 MHz, supporting ISM (industrial, scientific and medical) applications. Featuring 15 dB of gain, the NXP BLF2425M7LS-250P runs off a 28 V supply.

RFMW Ltd. announces design and sales support for a 5 to 1200 MHz passive, 2-way splitter from MiniRF. The MRFSP5725 provides a low cost, highly reliable solution for broadband CATV designs. Characterized for use in 75 ohm circuits, the MRFSP5725 offers 28 dB of isolation with typical insertion loss of only 0.5 dB. Lead free and RoHs compliant, the MRFSP5725 comes in a surface mountable 0.15  x  0.15  x  0.115" package.

RFMW Ltd. announces design and sales support for the BLF2425M6LS180P, a 180 W LDMOS transistor from NXP covering the industrial, scientific and medical (ISM) band of 2400 to 2500 MHz. The BLF2425M6LS180P has applications from solid state heating to RF plasma lamps to RF plasma torches. The BLF2425M6LS180P offers 13.3 dB of gain and runs off a 28 V supply with efficiencies up to 53.5%.

RFMW Ltd. announces design and sales support foran LDMOS power transistor internally matched for broadband operation from 2400 to 2500 MHz. NXP’s BLF2425M7LS140 provides 140 W average CW power with 18.5 dB of gain. The BLF2425M7LS140 draws 1.3 A from a 28 V supply with efficiencies up to 52%. Housed in a ceramic package with solder ears, the BLF2425M7LS140 is a highly rugged transistor for industrial heating applications.

RFMW Ltd. announces design and sales support for the Iso-Attenuator model RFSL2536-A30 from RF Circulator Isolator Inc (RFCI).The RFSL2536-A30 is capable of handling 1000 W peak / 200 W average forward power and 100 W CW reverse power into the on-board, 30 dB attenuator. Spanning 1920 to 2125 MHz, the RFCI RFSL2536-A30 provides >23 dB typical port-to-port isolation while maximum insertion loss is 0.25 dB.

RFMW Ltd. announces design and sales support for a two-stage wideband power amplifier supporting Test Instrumentation, EW and Radar applications from 2 to 18 GHz. The Qorvo TGA2214 provides 5 W of saturated output power with a large signal gain of >14 dB. Small signal gain is >22 dB. Biased from a 22 V supply, the Qorvo TGA2214 draws 450 mA of current. PAE measures greater than 20 percent.

RFMW Ltd. announces design and sales support for NXP’s BLF25M612G LDMOS power transistor offering 12 W average CW output power. The BLF25M612G is designed as a driver amplifier for high power CW applications in the 2400 to 2500 MHz ISM band. Operating from a 28 V supply, efficiency of the BLF25M612G is rated at 58%. Offering a very high gain of 18 dB, this transistor touts excellent ruggedness and thermal stability.

RFMW Ltd. announces design and sales support for MiniRF’s low cost, 2-way splitter, model MRFSP0014. Covering the CATV bandwidth of 5 to 1002 MHz, the MRFSP0014 is designed for applications that require small, low cost and highly reliable surface mount components. Typical insertion loss is 0.5 dB with isolation of 30 dB. Amplitude balance measures 0.2 dB with phase balance of 1 degree.

RFMW Ltd. announces design and sales support for a high efficiency, GaN, 5 W, input-matched transistor covering the 5 GHz ISM bands. The TriQuint (Qorvo) TGF3020-SM provides 5.7 W P3dB at 5.4 GHz. The transistor can be tuned for power, gain and efficiency. Linear gain is 12 dB. With wideband performance from 4 to 6 GHz, additional applications include telemetry, C-band radar, and instrumentation. Power added efficiency (PAE) at P3dB measures 53%.

RFMW Ltd. announces design and sales support for the TGA3504-SM, 2 to 30GHz Gain Block from TriQuint (Qorvo). The TGA3504-SM offers 8 dBm of output P1 dB with a corresponding small signal gain of up to 11.5 dB. Output third order intercept is >17 dBm. Wideband performance of the TGA3504-SM supports multiple applications such as Electronic Warfare (EW), military and commercial radar and military or commercial communication systems.

RFMW Ltd. announces design and sales support for the TAT7472A1F from TriQuint (Qorvo). The TAT7472A1F is the next generation replacement for the popular AH22 that has served CATV designs for many years. With a bandwidth of 50 to 1218 MHz, the TAT7472A1F increases the frequency coverage to support newer designs. Noise figure is <3 dB. Associated gain is 15 dB.

RFMW Ltd. announces design and sales support for the TGA3503-SM, 2 to 30 GHz gain block from TriQuint (Qorvo). The TGA3503-SM offers 19 dBm of output P1 dB with a corresponding small signal gain of up to 10 dB. Output third order intercept is >25 dBm. Wideband performance of the TGA3503-SM supports multiple applications such as Electronic Warfare (EW), military and commercial radar and military or commercial communication systems.

RFMW Ltd. announces design and sales support for the TGA2624-CP, 9 to 10 GHz power amplifier from TriQuint (Qorvo). The TGA2624-CP offers 16 W of saturated output power with 27 dB of gain and can be used in both pulsed and CW operation for marine and weather radar applications. It is capable of operating from a 28 V bias with 365 mA of quiescent current.

RFMW Ltd. announces design and sales support for the TQP9108 from Qorvo. With two stages of amplification, the TQP9108 offers 30.5 dB of gain with 31.3 dBm output power. Covering 1.7 to 2.17 GHz, the Qorvo TQP9108 serves small cell and repeater applications, DAS and booster amp applications for bands 1, 2, 3, 4 and 25. Power added efficiency is rated at 39% with OIP3 of 46 dBm.

RFMW Ltd. announces design and sales support for the industry’s first RF switch operating at zero Hertz with integrated RF, analog and digital functions. The Peregrine Semiconductor PE42020 SPDT targets T&M and ATE applications with frequency coverage from 0 Hz to 8 GHz.  Capable of handling 30 dBm input power at zero Hertz, patented ultra CMOS technology allows 36 dBm power handling at 8 GHz.

RFMW Ltd. announces design and sales support for the Delta Electronics manufacturing N crimp type plug 1103018A00E-000. This connector includes three .027 diameter (minimum) wire holes for use in securing the connector in vibration applications. This connector is designed to service cable applications with frequencies ranging from DC to 11GHz and has a voltage rating of 1,000 VRMS SSL.

RFMW Ltd. announces design and sales support for a 1 W (30.5 dBm) Psat amplifier covering radar and satcom applications from 16 to 18 GHz. The TGA2621 can be used as a general purpose amplifier drawing 400 mA from a 6 V supply. PAE for the TGA2621 is 28% while small signal gain is 26.5 dB. Qorvo offers this amplifier as a 2 x 2.5 mm DIE.

RFMW Ltd. announces design and sales support for a 2 to 6 GHz GaN driver amplifier from Qorvo. The TGA2597 provides a saturated output power of 31.5 dBm with >31% PAE. Small signal gain of the TGA2597 is greater than 24dB with large signal gain >13.5 dB. Qorvo offers the TGA2597 for radar, EW and communication applications requiring low current (40 mA) from a 25 V supply. 

RFMW Ltd. announces design and sales support for the TQP9107 from Qorvo, the new company name for the merger of TriQuint and RFMD. With two stages of amplification, the TQP9107 offers 35.5 dB of gain with 31.4 dBm output power. Covering 700 to 960 MHz, the Qorvo TQP9107 serves small cell and repeater applications, DAS and booster amp applications for bands 5, 8, 12 and 13. Power added efficiency is rated at 31% with OIP3 of 46 dBm.

RFMW Ltd. announces design and sales support for the SMV1275-079LF hyperabrupt junction varactor diode from Skyworks Inc. specifically designed for battery operation. The specified high capacitance ratio and low series resistance make the SMV1275-079LF appropriate for low phase noise voltage-controlled oscillators (VCOs) used at frequencies in wireless systems up to and above 2.5 GHz.

RFMW Ltd. announces design and sales support for a 35 W GaN power amplifier designed for weather and marine radars in the X-band (9 to 10 GHz). TriQuint’s TGA2622-CP offers power added efficiency of >43%. Operating from a 28 V supply, it draws only 290 mA. The TGA2622-CP offers high power in both pulse and CW operation thanks, in part, to TriQuint’s Cu-base packaging offering superior thermal management.

RFMW Ltd. announces design and sales support for the TriQuint TGA2621-SM, a multi-stage GaAs power amplifier for Radar and SatCom applications. The TGA2621-SM offers saturated output power of >30 dBm with a small signal gain of over 24 dB. Used as a final stage or driver for higher power amplifiers, the TriQuint TGA2621-SM draws 500 mA from a 6 V supply and offers >23% PAE

RFMW Ltd. announces design and sales support for the TGA2627-SM. This 32 dBm Psat GaN driver has a push-pull internal configuration that provides low harmonic content of <40 dBc over the 6 to 12 GHz frequency span. Small signal gain is rated at >27 dB. The TGA2627-SM is compatible with TriQuint’s high power amplifiers, easing the burden of multiple bias supplies.

RFMW Ltd. announces design and sales support for a 1.25 W driver amplifier serving radar, communication and test instrumentation applications from 2.7 to 4 GHz. The TriQuint TGA2731-SM contains an integrated attenuator and power detector. Self-biasing circuitry allows operation from a single, 6 V supply. The TGA2731-SM’s linear power gain is >24dB.

RFMW Ltd. announces design and sales support for a fully integrated, 50 ohm digital variable gain amplifier from TriQuint. The TQC9312 combines an amplifier + DSA + amplifier into a module that includes matching circuits, bias chokes, bypass and blocking capacitors making the TQC9312 a drop-in solution requiring no external components.

RFMW Ltd. announces design and sales support for a 36.5 dBm GaN power amplifier serving 27 to 31 GHz applications in SatCom, Point-to-Point and Point-to-Multipoint radios. The TriQuint TGA2594-HM is a hermetic, 7 x 7 mm QFN packaged device with 25 dB small signal gain and 35 dBc IM3.

RFMW Ltd. announces design and sales support for a medium power, high gain amplifier using TriQuint GaN technology. The TGA2597-SM offers 32 dB of saturated output power using a 25 V bias and drawing only 40 mA. This biasing voltage makes the TGA2597-SM compatible with TriQuint’s high power amplifiers

RFMW Ltd. announces design and sales support for TriQuint’s TGA2598-SM, a 33 dBm Psat GaN driver amplifier. The TGA2598-SM offers 25 dB small signal gain from two internal gain stages housed in a 4 x 4 mm, air-cavity ceramic QFN package. Covering 6 to 12 GHz, the TGA2598-SM offers >25% power added efficiency.

RFMW Ltd. announces design and sales support for Carlisle Interconnect Technologies SMA precision swept right angle adapters. Carlisle Interconnect Technologies features a continuous right-angled design to produce optimally matched low loss adapters for 50 Ohm applications with low VSWR and insertion loss and tested per MIL-STD-202.

RFMW Ltd. announces design and sales support fora 50 W, surface mount, directional coupler serving 15 to 18.5 GHz applications. The EMC Technology DN05W20F provides a 20 dB coupling factor with only 0.6 dB insertion loss. Directivity is 32 dB min from 17 to 18.5 GHz while the DN05W20F maintains a maximum VSWR of 1.6:1.

RFMW Ltd. announces design and sales support for a 5 to 8 GHz GaN driver amplifier. The TriQuint TGA2599-SMoffers 2 W of output power with >23 dB of small signal gain. Using a 25 V bias and drawing only 50 mA, the TGA2599-SMis compatible with TriQuint’s high power amplifiers, easing the burden of multiple bias supplies.

RFMW Ltd. announces design and sales support for a family of linear output power amplifiers to support small cell and repeater applications. The Skyworks SKY660XX amplifiers meet the stringent spectral linearity requirements of WCDMA and offer high PAE and margin. The SKY660XX family requires minimum design time and board space as they are fully matched and run off a single DC supply voltage.

RFMW Ltd. announces design and sales support for the TGA2620-SM, TriQuint’s 16 to 18 GHz driver amplifier delivering 19 dBm Psat for commercial and military radar and 18 dBm P1dB for communication systems. Small signal gain is up to 20 dB. The TGA2620-SM draws only 30 mA from a 6 V bias supply.

RFMW Ltd. announces design and sales support for a dual channel digital variable gain amplifier. TriQuint’s TQC9311 offers the lowest noise figure for any currently available dual channel DVGA. The low noise figure of 3.8 dB makes the TQC9311 ideal for use before a mixer in small cell and DAS applications. Covering 0.4 to 3.6 GHz, the TriQuint TQC9311 complies with 1.8 or 3.3 V logic.

RFMW Ltd. announces design and sales support fora 50 W, surface mount, directional coupler serving 14.5 to 19.7 GHz applications. The EMC Technology DN05Z15F provides a 15 dB coupling factor with only 0.5 dB insertion loss in the main band of 15 to 19 GHz.  Directivity is a strong, 28 dB min. Maximum VSWR in the DN05Z15F main band is 1.3:1. As a purely passive device, reliability is assured. 

RFMW Ltd. announces design and sales support for NXP’s BGA6130, a single stage MMIC amplifier offering 1 W (30 dBm) output power. Driven from a single, 3.6 V supply, the BGA6130 draws only 70 mA of current. Typical gain is approximately 15 dB and efficiencies >55% are achievable. The NXP BGA6130 features a simple quiescent current adjustment allowing class AB operation.

RFMW Ltd. announces design and sales support for ten new surface mount circulators from RFCI. Available at popular base station frequencies from 728 to 2690 MHz, these pin-style, surface mount circulators offer 500 W peak forward power handling and 80 to 100 W reverse power handling depending on package size.

RFMW Ltd. announces design and sales support for a temperature compensated voltage controlled attenuator. RFMD's RFSA2013 provides a linear attenuation slope versus control voltage with very little sensitivity to temperature changes. Built on SOI technology, linearity exceeds that of FET based designs. IIP3 linearity of the RFSA2013 is >50 dBm.

RFMW Ltd. announces design and sales support for a DOCSIS 3.1 compliant single-pole, double-throw (SPDT) switch from Peregrine Semiconductor. The PE42722 operates from 5 to 1794 MHz. Insertion loss is rated at 0.3 dB while offering up to 50 dB of isolation. Second harmonic performance is -119 dBc at 800 MHz with a 65 dBmV transmit input while the PE42722 third order performance is -138 dBc.

RFMW Ltd. announces design and sales support for a Ku-Band SPDT switch capable of handling 5 W RF power. The TriQuint TGS4310 offers >20 isolation with a low insertion loss of <1.7 dB. Designed for use by Ku-Band system providers, the TGS4310 supports radar, instrumentation and communication applications.

RFMW Ltd. announces design and sales support for a 2.4 GHz, smart energy, front end module (FEM) from Skyworks Solutions. The SE2438T-R  is fully integrated for ZigBee applications including embedded lighting controls were high temperature (+125 degree C) operation is needed. SE2438T-R contains integrated inter-stage matching, harmonic filters, and 1.6 to 3.6 V CMOS compatible digital control.

RFMW Ltd. announces design and sales support for a 6 GHz GaN SPDT switch supporting commercial and military radar, communications, EW, and general purpose applications handling pulsed power levels up to 100 W. TGS2355-SM insertion loss is <1.1 dB yet typical isolation is >40 dB. Switching speed for the TGS2355-SM is in the order of 50 nS.

RFMW Ltd. announces design and sales support for a 6 GHz GaN SPDT switch supporting communications, EW, Radar and general purpose applications handling power levels up to 40 W.  The TGS2354-SM from TriQuint is packaged as a 4 x 4 mm QFN while the TGS2354 offers similar performance in DIE for hybrid applications. Switching speed for both is in the order of 50 nS.

RFMW Ltd. announces design and sales support for TriQuint’s TGM3015-SM, a 3 x 3 mm QFN packaged GaN transistor offering 10 W P3dB. Linear power gain is up to 17.1 dB within the 0.03 to 3.0 GHz bandwidth of this device. PAE3dB of the TGM3015-SM is >62% which typifies TriQuint GaN efficiency.

RFMW Ltd. announces design and sales support for a pair of 5 GHz power amplifiers designed for 802.11a/n/ac WLAN applications.  TriQuint’s TQP5523 and TQP5525 are fully integrated modules with internal matching on both input and output ports. Both TriQuint devices run off 3.3 or 5 V Vcc and integrate a temperature compensated bias network.

RFMW Ltd. announces design and sales support for two new Peregrine Semiconductor switches. Both the PE42542 and PE42543 are SP4T switches with operating bandwidth of 9 kHz to 18 GHz. Both switches are capable of handling 10 dBm of RF power at 9 kHz. DC power consumption for both the PE42542 and PE42543 is 120-microamps from a 2.3 to 5.5 V supply.

RFMW  Ltd. announces design and sales support for Skyworks SKY13453-385LF, a single-pole, double-throw (SPDT), high isolation switch built using SOI technology. The SKY13453-385LF operates over a frequency range of 10 MHz to 6 GHz and can handle up to 2 W of RF input power. Offering high linearity of 57 dBm IP3 and low insertion loss of 0.4 dB, this switch serves T/R functions in applications from white space through dual-band WLAN.

RFMW Ltd. announces design and sales support for TriQuint’s TGP2615 digital phase shifter. The TGP2615 covers Ku-band radar and communications applications in the 15 to 19 GHz frequency range. 6-bit control with 5.625 degree least significant bit (LSB) offer high resolution and 360 degree coverage. 

RFMW Ltd. announces design and sales support for a fully integrated PIN limiter / Schottky diode module in a surface-mount package. The Skyworks SKY16602-632LF provides passive receiver protection in wireless or other RF systems ranging in frequency from 200 MHz to 4 GHz. Capable of handling 100 W of pulsed power, the SKY16602-632LF has a very low threshold of approximately 5 dBm. 

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE42424, a SPDT switch operating from 100 MHz to 6 GHz. The PE42424 uses Peregrine’s HaRP technology to create a 50 ohm, reflective switch for high power, 802.11a/b/g/n/ac applications. Handling up to 8 W of transmit power, the PE42424 supports switching applications for outdoor Wi-Fi access points or WiFi enabled small cells.

RFMW  Ltd. announces design and sales support for four new high-linearity, low noise gain blocks from TriQuint.  Offered as DIE, they target hybrid assembly designs requiring the highest level of performance unencumbered by package parasitics. All devices cover applications from 0.05 to 4 GHz such as commercial and military radar receivers, EW, and communication LNA designs.

RFMW Ltd. announces design and sales support for the TGF2819-FL and TGF2819-FS GaN transistors from TriQuint. These 32 V devices from TriQuint offer 20 W average power for non-pulsed applications and over 100 W peak power. Covering frequencies up to 3.5 GHz, the TGF2819-FL and TGF2819-FS are input pre-matched for S-Band applications in Radar and avionics.

RFMW Ltd. announces design and sales support for Delta Electronics 2.92 mm SMK coaxial cable connectors rated to 40 GHz for use in commercial, industrial and military applications. Three cable ends are available to support male to male assemblies, 7901111K003-000, 7901094K003-000 and 7901031K003-000. VSWR is rated at 1.15:1 max to 18 GHz and 1.30:1 max from 18 to 40 GHz.

RFMW Ltd. announces design and sales support for the TriQuint TGL2203, a 1 W VPIN limiter for Ka-band Radar systems. The TGL2203 has integrated DC blocks on both input and output ports. Capable of handling 1 W of incident CW power, this passive device has a flat leakage rate of <20 dBm at Pin <30 dBm. Insertion loss is <1 dB.

RFMW Ltd. announces a pair of GaN amplifiers targeted at weather and marine radar applications. Both TriQuint amplifiers operate from a 28 V bias drawing 365 mA of current and both the TGA2624 and TGA2625 are offered in DIE formats.  The TGA2624 (9 to 10 GHz) supports a saturated output power of 42.5 dBm. TriQuint’s TGA2625 (10 to 11 GHz) is specified at 43 dBm  Psat with 37 dB of gain.

RFMW, Ltd. announces design and sales support for Peregrine Semiconductor’s PE45450, adjustable power limiter providing protection for up to 50 W pulsed RF input from 9 kHz to 6 GHz. This broadband limiter can handle up to 10 W of power in CW applications. The adjustable power limiting threshold, from +25 to +35 dBm, enables flexibility across different platforms and architectures.

RFMW, Ltd. announces design and sales support for a pair of 100 W VPIN limiters from TriQuint. The TGL2206-SM covers applications falling from 2 to 5.5 GHz while the TGL2207-SM extends the range from 2 to 6.5 GHz. Both limiters offer <1 dB insertion loss and neither the TGL2206-SM nor TGL2207-SM require DC bias. Input/output return loss measures 15 dB.

RFMW, Ltd. announces design and sales support for Peregrine Semiconductor’s 2-bit, fast-switching digital step attenuator (DSA). The PE43205 offers 29 nS switching time when transitioning between 6, 12 or 18 dB of attenuation. Specified from 35 MHz to 6 GHz, the PE43205 offers IIP3 of 61 dBm for highly linear, wide dynamic range circuits.

RFMW Ltd. announces design and sales support for adual-band SAW filter module from TriQuint. TheTQQ1212 serves band 34 (2010 to 2025 MHz) and band 39 (1880 to 1920 MHz) in a single, 4x3 mm module. Band 34 passband bandwidth is 15 MHz while band 39 has a 40 MHz bandwidth. Insertion loss in both bands is 3.8 dB max.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s new, adjustable power limiter providing protection for up to 50 W pulsed RF input. For CW applications, the PE45140 handles up to 10 W of power. The adjustable power limiting threshold, from +22 to +32 dBm, enables flexibility across different platforms and architectures.

RFMW Ltd. announces design and sales support for Rosenberger’s 15K101-40ME4 Micro-RF test switch connector. The 15K101-40ME4 Micro-RF test switch is an ultra-miniature (1.8 mm x 1.9 mm, height 1.5 mm), low-cost, surface mount, coax "switch” connector for the verification of antenna/circuit performance in any kind of small device.

RFMW Ltd. announces design and sales support fora 50 ohm absorptive switch from TriQuint. The TQC0015 internal terminations can handle a maximum CW power of up to 2 W. This performance is enhanced with an enable-pin functionality and compatibility with 1.8 or 3.3 V control signals, making the TQC0015 useful in small cell applications.

RFMW Ltd. announces design and sales support fortwo 45 W GaN on SiC transistors from TriQuint. The T1G4004532-FL (flanged) and T1G4004532-FS (earless) are wideband, DC to 3.5 GHz devices offering 17 dB of gain, nearly twice that of competing GaN devices. Both transistors are input matched for S-band operation and operate from a 32 V supply.

RFMW Ltd. announces design and sales support for a unique low noise amplifier/gain block. TriQuint’s TQL9044 offers market leading 0.6 dB noise figure from 1.5 to 4 GHz. Integrated bypass modes allow circuit designers the ability to control both LNA shutdown and internal bypass switching. Three modes are available: LNA off, bypass off; bypass on, LNA off; bypass off, LNA on.

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s SP4T switch, PE42442. The PE42442 offers the best combination of high isolation and low insertion loss for a 50 ohm absorptive SP4T with 52 dB isolation and 1.15 dB insertion loss at 2.7 GHz. Operating with supply voltages as low as 2.3 V, the PE42442 maintains a +58 dBm IIP3.

RFMW Ltd. announces design and sales support for a wideband GaAs VPIN limiter capable of protecting sensitive components against high power incident signals. The TriQuint TGL2205-SM operates from 2 to 6 GHz with low insertion loss of less than 0.6 dB. It can limit up to 100 W incident pulsed-power with a low flat leakage of less than 16.5 dBm.

RFMW Ltd. announces design and sales support forTriQuint's TGA2216-SM GaN, cascode amplifier operating from 0.1 to 3 GHz. The cascode configuration offers exceptional wideband performance as well as supporting 40 V operation. The TGA2216-SM is ideally suited to support both radar and communication applications across defense and commercial markets as well as electronic warfare.

RFMW Ltd. announces design and sales support for Skyworks SKY16601-555LF PIN diode limiter module covering the frequency range of 0.5 to 6.0 GHz. The SKY16601-555LF addresses a growing need for receiver low noise amplifier (LNA) protection in microwave applications. It is a fully integrated PIN diode, low-threshold limiter module in a 2.5 x 2.5 mm SMT package.

RFMW, Ltd. announces design and sales support fortwo “small cell” power amplifiers from TriQuint. The TQP2451 and TQP2453 support 1900 and 1800 MHz transmitter designs respectively. With average power output of 2.5 W, both devices include 3 gain stages, the final stage being a Doherty design for high peak power performance up to 20 W.

RFMW  Ltd. announces design and sales support for MiniRF’s 4-way splitter, model MRFSP0012. Covering the common CATV bandwidth of 5 to 1002 MHz, the MRFSP0012 replaces three, 2-way splitters commonly used to achieve a 1 to 4 split thus saving board space, reducing part count and offering easier design configuration. 

RFMW  Ltd. announces design and sales support for Peregrine Semiconductor’s PE33241, a high performance, flexible  integer-N PLL capable of frequency synthesis up to 5 GHz. The PE33241 offers a low phase-noise floor FOM of -230 dBc/Hz, a 20 dB normalized phase noise improvement over previous generation PLLs.

RFMW, Ltd. announces design and sales support fora new, wideband hybrid coupler from EMC Technology. The WH0530TF offers 100 W CW power handling from 500 to 3400 MHz. With an operating temperature range of -55 to +85 degrees C, amplitude balance is held to +/- 0.9 dB max while phase balance is held to +/- 3 degrees.

RFMW Ltd. announces design and sales support fora high gain, 10 W GaN amplifier targeted at S-band RADAR applications. The TriQuint TGA2583-SM offers 33 dB of gain and >50% PAE from 2.7 to 3.7 GHz. Saturated output power is rated at 40.5 dBm from a 25 to 32 volt supply providing 175 mA.

RFMW, Ltd. announces design and sales support for two BAW filters targeting applications where 2.4 GHz WLAN, Bluetooth and Wi-FI products must coexist with 4G LTE and TD-LTE signals. TriQuint’s 885062 and 885071 coexistence filters offer high rejection in adjacent LTE bands yet come in an industry-leading small package measuring 1.4x1.2x0.46 mm.

RFMW, Ltd. announces design and sales support forPeregrine Semiconductors’ 10 MHz to 8 GHz SP4T switch. The PE42441 combines low insertion loss of 1 dB with high isolation of 39 dB (measured at 6 GHz). Internal 50 Ω terminations give this absorptive switch a P0.1 dB compression point of 31 dB, a significant competitive advantage for target applications in wireless infrastructure and wireless connectivity.

RFMW Ltd. announces design and sales support for two DC-3.5 GHz power transistors from TriQuint. Available in either a flanged or earless Gemini package as the T1G4020036-FL and T1G4020036-FS respectively, the devices provide two independent 120 W paths. Linear gain measures 16 dB at 2.9 GHz. A low thermal resistance base material supports applications in RADAR, communications and avionics.

RFMW Ltd. announces design and sales support for Sangshin Elecom triplexers targeting avionics applications for Automatic Dependent Surveillance-Broadcast (ADS-B),  Universal Access Transceiver (UAT) and Traffic Collision Avoidance System (TCAS). Sangshin’s TPX978/1030/1090SA  triplexer offers excellent isolation of 45 dB between each band along with only 2.5 dB of insertion loss. 

RFMW Ltd. announces design and sales support for TriQuint’s 30 MHz to 2.5 GHz TGA2237 with >52% PAE. The TGA2237 offers 10 W saturated power with 13 dB of large signal gain. P1 dB is rated at >32 dBm with a small signal gain of 19 dB. TriQuint’s TGA2237 operates from a 30 V supply and uses only 360 mA of current.

RFMW, Ltd. announces design and sales support for the TGA2576-2-FL from TriQuint. This 2.5 to 6GHz GaN power amplifier provides 40W of saturated output power with power added efficiency (PAE) of 36%.

RFMW Ltd. announces design and sales support forthe TGA2576-2-FL from TriQuint. This 2.5 to 6 GHz GaN power amplifier provides 40 W of saturated output power with power added efficiency (PAE) of 36%. Suitable for EW, Radar, test instrumentation, communications systems or as an EMC amplifier, the TriQuint TGA2576-2-FL operates at 30 V and 1.55 A from its bias supply.

RFMW Ltd. announces design and sales support forwideband, DC-3.5GHz GaN transistors from TriQuint. Available as the T2G4003532-FS earless package or the T2G4003532-FL, both transistors are input prematched for S-band operation. The devices are constructed with TriQuint's proven TQGaN25 process, which features advanced field plate techniques to optimize power and efficiency at high drain bias operating conditions.

RFMW Ltd. announces design and sales support for the TGA2612 from TriQuint. Optimized for performance from 6 to 12 GHz, the TGA2612 features >22 dB small signal gain with 20 dBm P1dB. Noise figure is <1.8 dB while OIP3 is an industry leading 29 dBm. To simplify system integration, the TriQuint TGA2612 is fully matched to 50 ohms with integrated DC blocking caps on both input and output ports.