Company Profile

Contact Information:


Phone: 4413.7655.0220
Fax: 4413.7655.2145

Location:


AtlanTecRF
40A Springwood Drive
Braintree, Essex CM7 2YN
United Kingdom

Engineering Library Debuts on AtlantecRF Website

Engineers often have specific requirements which may not be available in the standard range of products.  AtlanTecRF recognises this all too familiar problem by demonstrating how they are able to optimise, customise or design a specific solution depending on what the customer needs with the release of over 120 drawings across 19 component categories into an online Engineering Library on their website.

Read more

A Multi-purpose ‘No Strings’ Amplifier

AtlanTecRF has introduced a new broadband amplifier module with very versatile characteristics, which makes it suitable for a variety of applications. One such application is the BOX battery-powered multi-purpose portable amplifier, which lends itself to laboratory and measurement tasks where a single very wide bandwidth AC power-independent amplifier offers...Read more
Ruggedised Satellite Simulator

Ruggedised Satellite Simulator System

AtlanTecRF launched its ruggedised satellite simulator system. Comprised of two units, this satellite simulator (RSS Series) is portable thereby facilitating the testing and calibration of terminals off-satellite. 

Learn More
coaxial power divider

Power Dividers Cover 1 to 40 GHz

AtlanTecRF has launched a new range of coaxial power dividers. These 40GHz products, designated AKD, are available in a choice of 2, 4 or 8 ways and feature bandwidths starting at 18 to 40 GHz but extending to the full six plus Octaves of 1.0 to 40.0 GHz.

Learn More
The MSS Multi-Path Satellite Simulator

Multi-Path Satellite Simulator System

AtlanTecRF launched the new Multi-Path Satellite Simulator System (the MSS Series.) The MSS Systems are designed to ‘talk’ to two ground-based or mobile satcom stations, simultaneously, thereby replicating for test purposes, the satellite link while remaining off-air. Each system consists of three parts, a base control unit and two weatherproof transponders each of which can be orientated to connect with a system under test (SUT) antenna. 

Learn More
cable connector options

AtlanTecRF Expands Cable Assembly Range

AtlanTecRF has launched an expanded range of cable connector options for its standard cable assembly range. New connectors include SMA male straight, SMA male R/A, SMA female bulkhead, Type N male straight, N male R/A, N female bulkhead. These are in addition to the standard SMA male connectors already offered across the company’s cable range. These connector options can be applied to AtlanTecRF’s ASR, ASF and AFX cable series.

Learn More
big-mfg-bt

AtlanTecRF Launches Multiple Frequency Comb Generator

AtlanTecRF has launched a Multiple Frequency Comb Generator, which is designed for use in up to the minute particle physics and material science research. The input signal is amplified to provide power to a comb generator. Frequencies are selected by a switched filter bank. Signal control for AM modulation is provided by way of a voltage variable attenuator and phase shift control through a line stretcher.

Learn More
AtlanTechRF

AtlanTecRF Launches Ka-Band Dual Channel Loop Test Translator

AtlanTecRF has launched a Ka-Band version of its Dual Channel Loop Test Translator for testing and monitoring signals at satellite communication ground stations and teleports. This product features dual channel operation with the ability to introduce different transfer characteristics in each channel.

Learn More
2-Ethernet-Controlled-Ka-Band-LTT

Ka-band Loop Test Translators: ALR Series

AtlanTecRF launched a range of Ka-band loop test translators (LTT) with ethernet control. The ALR series of ka-band loop test translators address the 27 GHz uplink market and feature synthesised variable frequency local oscillators (LOs) to provide the user with the most versatile and comprehensive operating configurations for translation of uplink (Tx) frequencies to either downlink (Rx) frequencies or to L-Band, and for L-Band to downlink (Rx).

Learn More
Ultra Broadband Amplifier

Ultra Broadband Amplifier

AtlanTecRF launched an ultra broadband amplifier, covering the 50 MHz to 20 GHz frequency range in a single unit. This 25 dB gain block delivers up to 18 dB at 1 dB compression and yet has a typical noise figure of just 1.8 dB, thereby making it an all round, general purpose amplifier with applications in test measurement, electronic countermeasures and scientific research as well as a whole range of communication equipment.

Learn More
Ultra BB Digital Control PIN Attenuator (low res)

Ultra Broadband Digital Attenuator: ADA-500-2000-60/0.5

AtlanTecRF launched its latest ultra broadband 500 MHz to 20 GHz digitally controlled PIN attenuator. This digital attenuator (ADA-500-2000-60/0.5) covers the whole frequency range from 500 MHz to 20 GHz and provides a minimum attenuation range of 60dB in 0.5dB steps with TTL control of 7 bits. Switching time is less than 200 nanoseconds and the input power handling capability is up to +25dBm.

Learn More
AtlantecRF Phase Locked Voltage Controlled Oscillator (low res)

APV Series of Phase Locked Voltage Controlled Oscillators

AtlanTecRF announced the launch of its APV Series of Phase Locked Voltage Controlled Oscillators. These compact oscillator units find application in communication systems as a high quality local oscillator with the ability to lock to a high stability external reference of 10 or 100 MHz. The fixed output frequency can be in the range from 10 MHz to 32 GHz and is at a minimum level of +13 dBm.

Learn More
Untitled

AtlanTecRF Announces Another Innovative Cable Design to Popular Test Cable Range

AtlanTecRF announced the launch of its range of ultra flexible low loss test cables. The new APC series features a degree of flexibility not previously seen in assemblies of this type. Key to its ultra flexible performance is the unique cable construction in five layers from a silver plated copper centre conductor through low density PTFE dielectric, silver plated copper shield and silver plated copper outer shield, to the polyurethane jacket.

Learn More
BLR series of ethernet

BLR Series Of Ethernet

AtlanTecRF announced the launch of its new BLR series of ethernet controllable LTTs (loop test translators) in convenient bench instruments. With models designed for operation in both Ku and Ka bands, these portable items of satcom test kit can be easily transported to the test location and set up for either local operation or remote operation via ethernet with a GUI.

Learn More
6u plug-in module LTT

AtlanTecRF Launches LTT for Satcom RF Testing

AtlanTecRF has launched a plug-in 6U Loop Test Translator (LTT) for satcom RF testing. The traditional configuration for loop test translators used in off-satellite set up, calibration, alignment and quality monitoring of ground based equipment in satcom terminals is the 19” x 1U rack mount chassis. In other applications such packaging does not deliver optimum equipment densities or ease of operation. In such situations AtlanTecRF's plug-in 6U Module comes into its own, bringing ATE stacking principles to the satcom RF test world.

Learn More
AtlanTecRF

AtlanTecRF Launches Q-Band Loop Test Translators

AtlanTecRF has launched its range of Q-Band Loop Test Translators with Ethernet Control. Addressing the nominal  44 GHz uplink market the company’s three new products provide loop-back frequency conversion of Transmit (Tx) to Receive (Rx), Transmit to L-Band and L-Band to Receive, thereby providing a complete suite of system testing instruments.

Learn More
AtlanTecRF-Drone-Payload-Satellite-Simulator-high-res

AtlanTecRF Launches Drone Payload for RF Testing of Satcoms

AtlanTecRF has launched a lightweight, rugged and compact Drone Payload Satellite Simulator. It provides a transmit (Tx) to receive (Rx) loop-back in testing mostly compact and mobile satellite communications systems in situ and without the need for connection via cables.

Learn More
ASY-0050-2000

Frequency Synthesiser with GUI: ASY-0050-2000

AtlanTecRF announced the launch of the miniature 0.5 to 20 GHz frequency synthesiser with GUI. Minimum set-up and easy operation are key features of the compact synthesiser, designated ASY-0050-2000, covering the full 0.5 to 20 GHz range. In addition to the ultra broadband range the 2.5 x 2.5 x 1.1 inch housing is packed with performance including 1 KHz step size, +/-0.5 ppm frequency stability over a -10 to +70 degree C operating temperature range and RS485 control with easy-to-use GUI.

Learn More
ACH series2

High Velocity Cable Assemblies: ACH Series

AtlanTecRF, a leading global RF and microwave components and equipment manufacturer, announced the latest addition to its stable of high performance cable assemblies - the ACH series of high velocity products available in frequency ranges of DC-18, DC-26.5, DC-40 and DC-50 GHz. With velocity of propagation of 83%, the standard assemblies are available from stock  in lengths of 0.5, 1.0, 1.5 and 2.0 metres. 

Learn More

VNA Test Cables

VNA test cablesAlready well known for its extensive range of test cables and comprehensive equipment cabling, AtlanTecRF launched its top-performing series of VNA test cables designed for use with vector network analyser set-ups to 50 GHz. The AVC series of low loss VNA test cables in both 40 and 50 GHz versions offer excellent RF performance in an ultra-flexible construction with superb crush resistance and a jacket which stands up to the high abrasion levels.

Learn More

Bench Instrument Satcom Line Amplifiers

Bench Instrument Satcom Line AmplifiersBuilding on its already comprehensive range of portable satellite communications test equipment AtlanTecRF launched a range of bench instrument Satcom line amplifiers. The range, which are housed in lightweight bench instrument cases cover a frequency range from 10 MHz to 31 GHz and incorporate all satcom bands including L, S, C, X, Ku and Ka.

 

 

Learn More

Ethernet Controlled Satcom Signal Generators

Ethernet Controlled Satcom Signal Generators

AtlanTecRF launched a series of ethernet controlled satcom signal generators offering exceptional versatility in frequency and level control. Designed to provide a built-in signal source for satellite communications approved installations as well as general purpose and production line testing, the ESG Series of Signal Generators offers ethernet control for output frequencies covering all bands including L, S, C, X, Ku, Ka and Q.

Learn More

Build Your Own Bandpass Filter

AtlantecRF-Logo

AtlanTecRF, a leading global RF and microwave components and equipment manufacturer, launched its second ‘build your own’ web tool, specifically designed for people looking to customize bandpass filters. Every web tool is designed by engineers with the aim of simplifying the product specification process by guiding each user through a range of simple questions.

Learn More

Ethernet Controlled Broadband Noise Generators

Broadband Noise GeneratorsAtlanTecRF launched its RNG range of broadband noise generators featuring Ethernet control.  The nineteen standard models have total noise output power in the range -20 to +30dBm with noise densities from -122 through to -13dBc/Hz. Output level can be controlled either locally with convenient and easy to interpret increase/decrease front panel buttons and LCD readout or via Ethernet with remote GUI derived from an mBed within the instrument.

Learn More

Dual Channel Loop Test Translator

Dual Channel Loop Test TranslatorAtlanTecRF launched a range of dual channel loop test translators designed to provide a comprehensive test and quality monitoring facility in satellite communications ground stations and teleports. The ALD series of LTTs, available for operation in both Ka and Ku bands, feature simultaneous translation of transmit (Tx) frequencies to L-band and L-band to receive (Rx) frequencies thereby enabling uplink and downlink parameters to be evaluated at the same time and with one instrument.

Learn More

Concept in Loop Test Translators, Portable LTT Instruments

BLT rangeAtlanTecRF introduced a concept in the application and use of satellite communications Loop Test Translators, a series of instruments designed to be portable rather than part of a permanent 19” rack installation. The new BLT range, covering S, C, X, Ku, DBS and Ka bands, feature the portable bench instrument style housing allowing the units to be readily moved between test locations.

Learn More

Build Your Own Amplifier Web Tool

AtlantecRF-LogoAtlanTecRF, a leading global RF and microwave components and equipment manufacturer, launched an easy to use ‘build your own amplifier’ web tool. The tool is designed to take customers through a series of questions to help them easily specify and customize their amplifier requirements. This tool takes away a lot of the information exchange between parties. ensuring all necessary data required to customize an amplifier is gathered upfront before product specifications are begun.

Learn More

Availability of PC Programmable Sources at Reduced Prices

ANS3Anritsu Co. expands its Signal Analyzer MS2840A family with the introduction of three models that support the 9 kHz to 3.6 GHz, 6 GHz, and 26.5 GHz frequencies. With the instruments, Anritsu fills a market void for cost-efficient, high-performance signal analyzers that address the middle frequency ranges, providing an economical solution to accurately measure wireless equipment, oscillators and other components for narrowband applications, and more.

Learn More

Ka-Band Satellite Simulator: LSS Series

Ka Band-Satellite SimulatorThe LSS series of satellite simulators enable RF testing of mobile satellite communications systems without the need for cabling and with true portability for optimum equipment location. These simulators are fitted with dual polarized horn antennas in both the uplink and downlink bands and for each frequency conversion there is a separate attenuator providing adjustment of signal levels to accommodate receiver sensitivity and range distance.

Learn More

Electromechanical Switches

ELM Switches group LR ePRAtlanTecRF has launched a range of high reliability, long life electromechanical switches, with many popular models available from stock. These high reliability switches come in configurations from single pole single throw (SPDT) through to SP10T, allowing a microwave signal to be switched from a common input to a number of outputs. Typical performance figures of 0.5 dB max insertion loss (18 GHz) with 60 dB isolation and standard operating temperature range of -25 to +65C.

Learn More

Portable Test Amplifier

Amplifier portable APT for ePRDesigned to meet a demand among RF and microwave test engineers, this convenient-to-use and versatile amplifier covers the full 1 to 18 GHz frequency range. The rugged housing is suited to the busy laboratory environment. Built within a cast aluminium housing, 129 x 84 x 67 mm,  the amplifier delivers 35 dB gain and +20 dBm P1 output power and comes complete with a manual on-off locking toggle switch for quick application and removal of the amplified signal.

Learn More

Satellite Communications Test Loop Translators

X Band TLT ePR Low ResAtlanTecRF announces a new series of satellite communications test loop translators for use in X-Band. Operating in X-Band the new range of test loop translators provide direct frequency conversion either from transmit (Tx) to receive (Rx) or from transmit (Tx) to L-band (L) or from L-band (L) to receive (Rx) in the nominal frequency ranges of 7.9 to 8.4 GHz Tx and 7.25 to 7.75 GHz Rx.

Learn More

ASG Miniature Signal Generator

The miniature signal generator from AtlanTecRF uniquely combines exceptional RF performance and versatility of digital interface in a highly compact package. In addition to the ultra-wide frequency range of 25 to 6000 MHz, tunable in 1 KHz steps, the spearhead of RF performance of these ASG modules is in the spectral purity of their output signal. Phase noise at an output frequency of 1 GHz is better than -106 dBc/Hz at an offset of 100 KHz from the carrier.

Learn More

Ultra Wideband Amplifiers

Ultra Wide Band Amplifiers

A range of ultra wideband amplifiers with frequency coverage from 10 MHz to 30 GHz has just been released by AtlanTecRF. Designed to be both economical and versatile, the amplifiers include a model to operate over 0.05 to 20 GHz in one unit with 24 dB gain, +23 dBm output power and less than 4 dB noise figure, while another spans 12 to 30 GHz with 30 dB gain and +20 dBm output power.

Learn More

Coaxial Power Dividers

Power Div AKD 1-40GHz ePRIn another strong move into the high frequency bands, AtlanTecRF has announced a new range of coaxial power dividers. These 40 GHz products, designated AKD, are available in a choice of 2, 4 or 8 ways and feature bandwidths starting at 18 to 40 GHz but extending to the full six plus Octaves of 1.0 to 40.0 GHz.

Learn More

Two Microwave Detectors

Schottky Detectors BZD AtlanTecRF ePR

AtlanTecRF has two models of Zero Bias Schottky Detectors with high sensitivity and a wide operating temperature range. The first two frequency ranges offered are 10 MHz to 18 GHz and 2.0 to 8.0 GHz, both with sensitivity of 500 mV/mW and TSS of -50 dBm. Flatness over the 10 MHz to 18 GHz frequency band is +/-1.25 dB max and VSWR for each unit is 2.0:1.

Learn More

AKC Series - Directional Couplers

Directional Coupler 40GHz AKC ePRFurther enhancing it’s offering of 40 GHz passive products, AtlanTecRF has introduced directional couplers with frequency capability up to 40 GHz in a number of bands including 18 to 40, 6 to 40, 2 to 40 and the ultra-wide band version 1 to 40 GHz. Each frequency range in the new AKC series is available in a choice of 10, 20 or 30 dB coupling.

Learn More

Digitally Controlled Attenuators

Digitally Controlled Attenuators to 40GHzAtlanTecRF launches its first ever comprehensive range of digitally controlled PIN attenuators. The ADA series covers frequencies from 500 MHz to 40 GHz in 17 models.

Learn More

ABT Series of Bias Tees

Bias Tee ABT for ePRAs a vital link in utilising a single coaxial cable to carry both RF signals and DC power, the new ABT series of Bias Tees from AtlanTecRF bring this capability to systems operating at frequencies up to 50 GHz.  With RF connector choices of 2.92 mm, SMA and Type N the actual frequency bands offered range from 10 MHz to 2.5 GHz through to 50 KHz to 50 GHz with DC voltage capability to 100 Volts and current capacity to 2.5 Amps.

Learn More

High Grade SMA/Type N Adapters

Adapters Group LR ePRWell-known for its comprehensive ranges of connectors and cable assemblies, AtlanTecRF has introduced its range of  high grade, yet affordable, coaxial adapters in the popular SMA and Type N series of interconnects. Suitable for use to 18 GHz and in some cases to 26 GHz, these professional quality adapters are available from stock and feature materials well suited to commercial, defence and aerospace environments.

Learn More

Directional Coupler Pair

Directional Coupler Wideband ePRTwo new high performance directional couplers from AtlanTecRF cover the entire frequency range from 375 MHz to 18 GHz with at least 3 GHz of overlap. Available in a choice of either 10, 20, or 30 dB the 50 W couplers with SMA connectors and built-in terminations will operate over a temperature range of -55 to +55° C, making them suitable for use in applications from airborne ECM to the benign test bench.

Learn More

Wide Band VHF/UHF Isolators

Low Frequency Isolator ePRNewly released from AtlanTecRF is a range of Wide Band Coaxial Isolators operating in the VHF and UHF frequency ranges and designated the LFI series. Offering up to an octave of band width at frequencies as low as 100 MHz, this range of products in 50 ohm impedance represents a first in solutions for both the RF design engineer and the RF test engineer.

Learn More

BPI Series of Power Dividers

AtlanTecRF High Isolation Power Divider ePR low resBreaking barriers in the microwave system and test world, the new and innovative BPI series of power dividers feature a previously unattainable isolation between channels in excess of 40 dB. This is achieved by the use of ferrite isolators in each output port, a design enhancement which brings with it low VSWR of less than 1.25:1, and reverse isolation of greater than 20 dB, a hitherto unavailable asset.

Learn More

Microwave Attenuator Kits

Attenuator Kit ePRIn another innovative move in support of the RF/Microwave Test Engineer, AtlanTecRF has released the ASET range of boxed Attenuator Kits with SMA connectors. Offered in two frequency ranges, DC to 6 GHz and DC to 18 GHz, the ASET series of stainless steel attenuators are supplied in an organised storage box with individual compartments for each value from 1 to 10 dB in 1 dB steps, plus 15, 20 and 30 dB.

Learn More

Versatile Series of Coaxial DC Blocks

DC BlocksAtlanTecRF has introduced a new series of coaxial DC Blocks which are designed to provide the RF/Microwave communication systems engineer with versatile solutions in dealing with the presence of DC power on coaxial signal cables. With frequency ranges from 10 MHz to 40 GHz these small devices allow RF/microwave signals to pass with minimum insertion loss while blocking any DC present.

Learn More

Low PIM Cable Assemblies

ASF Low PIM SpotShad lo resAtlanTecRF now has stock of low PIM cable assemblies, which are designed specifically for applications where it is essential to have a low level of passive intermodulation products. This newly launched series of high performance and low intermodulation cable assemblies are available in two convenient diameters and a large range of lengths.

Learn More

Flexible Test Cable Assemblies

Flexible Test Cable AssembliesAtlanTecRF introduces a comprehensive range of fully flexible test cable assemblies which are particularly suited to extensive test set-ups either in the laboratory or automatic test equipment. Grey in colour and only 0.168 inches in diameter the standard connector types are SMA male with the well-known and reliable anti-torque feature for which AtlanTecRF assemblies are renowned.

Learn More

Miniature Frequency Synthesisers

Mini-Synthesiser-redgold-ePR[1]The new range of single phase-locked loop frequency synthesisers from AtlanTecRF exhibit excellent performance in terms of electrical specification and versatility. Their miniature size ensures they are highly suitable for many applications in communications, radar and test instrumentation.

Learn More

Satellite Redundancy Controller

SatelliteRedundancyControllerAtlanTecRF introduces the new SRU-1000 satellite communications 1:1 redundancy controller that provides a compact and comprehensive method of monitoring and controlling redundancy switching of transmit and receive chain units. The 19” x 1 U rack mount unit is designed to perform a variety of functions in status monitoring and redundancy switching of transmit and receive chain units.

Learn More

Ethernet Satellite Loop Test Translator

LTT-Synthesised-LOThe all new ALR series of satellite loop test translators (LTT) introduces, for the first time, the concept of synthesised local oscillator (LO) frequency control to provide the user with a compact, versatile and comprehensive approach to satellite communications equipment alignment and quality monitoring in both Ka and Ku operating bands.

Learn More

AtlanTecRF Broadband Noise Generators

NoiseGenerThe ANG series of noise generators provide up to 1 W of white Gaussian noise output in several models over the 10 Hz-18 GHz frequency range, with custom options to 40 GHz. Stock availability. The noise, which is diode generated, is amplified and the level can be varied in 1 dB steps from 0 to 10 dB or optionally in 0.1 dB steps from 0 to 111 dB.

Learn More

AtlanTecRF Loop Test Translators

LoopTestTrThe ALT series of LTTs are designed to replace the satellite link for test and alignment of earth station systems operating in S,C,X,Ku,Ka or DBS frequency bands. Incorporating fundamental frequency phase locked oscillators and double balanced mixers, the translators block convert frequencies from uplink to either downlink or L-band for instantaneous monitoring.

Learn More

AtlanTecRF PIN Switches

PINswitch100Single pole single yhrow; two throw; three throw, four throw, eight throw. Frequency Range: 0.02- 18GHz, TTL control, absorptive & reflective, octave & multi-octave, high isolation, low insertion loss. Operating temperature ranges from -55C to +85C. Stock availability.

Learn More

AtlanTecRF Isolators & Circulators

IsolatorsCirFrequency Range: 800 MHz to 23 GHz, Octave & Standard Bands, compact design, internal load, SMA Connectors. Coaxial Isolators (ACI-2000 series) and Circulators (ACC-20000 series) are designed for low power applications. Custom frequency ranges, specifications and configurations may also be reviewed for quotation.

Learn More

AtlanTecRF Filters

Filters1003 dB cut off frequency in range 1 to 12 GHz for high pass filters and 1-18 GHz for low pass filters. Miniaturised suspended substrate, quasi-elliptical function, excellent temperature stability, very rugged design. Stock availability.

Learn More

Cable Assemblies

CableAsse

ASF Series: Reformable Copper/Tin Composite & ASR Series: Reformable Aluminium Semi-Rigid. AtlanTecRF’s ASF and ASR series of coaxial cable assemblies provides the microwave system designer with a versatile solution to equipment and sub-assembly cabling without the need for detailed design of semi-rigids.

Learn More

AtlanTecRF Attenuators & Terminations

AttenuatorsAttenuators: SMA & 2.92 mm; N, TNC, BNC, SMP plus 2 W SMA; medium power SMA and N. Terminations: SMA, 2.92 mm & N plus medium power SMA and N. Stock availability. Standard Configuration: Male Input/Female Output. Single sex versions also available.

Learn More

AtlanTecRF Oscillators - PLO, CRO, DRO and SLO

OscillatorsPPhase locked oscillators: frequency range 300 MHz to 14 GHz and PLO’s with translator from 3 to 14 GHz. Stabilised oscillators: CRO & DRO: 300 MHz to 14 GHz. Synthesised local oscillators: 5.1 to 14.5 GHz in bands. The PLOs also have a reference monitor output. Stock availability.

Learn More

AtlanTecRF PC Programmable Sources – ANS2 & 3

PC-ANS2-3Programmable, synthesised RF signal sources feature frequency and level control (plus modulation with the ANS3) and, with a standard office PC, provide turn-key solutions for variable frequency sources. Both series offer wide tuning ranges, low phase noise, non-volatile memory and are low cost and compact.

Learn More

AOX-010200 A Miniature, Small Signal, LNA

AOXSeriesLAmplifier with super wide frequency and temperature range that is possibly the world’s most versatile amplifier has just been announced by AtlantecRF, the UK based microwave components and equipment manufacturer, in that it is capable of operating over a temperature range from -269C (4K) to +100C at frequencies from 1 to 20 GHz.

Learn More

BOX-010200 Portable Gain Block Amplifier

Box010200Battery powered wide band amplifier is believed to be the first of its kind. The new BOX-010200 amplifier from AtlanTecRF, UK's based microwave components and equipment manufacturer, provides a portable and rugged gain block for situations where cordless operation is either essential or preferred.

Learn More

AOX Amplifier Series

AOXampSEAtlanTecRF is proud to announce its new, versatile and affordable range of UK designed and manufactured amplifiers. Spanning frequencies from 1 to 20 GHz and operates in temperatures ranging from cryogenic to +100°C, the newly introduced AOX amplifier series features 21 different models, each offering one or more octaves of bandwidth.

Learn More

Ultra Flexible Test Cables

TestCablesUltra flexible test cables with high phase stability are new from AtlanTecRF. With velocity of propagation to 70% and a frequency range from DC to 18 GHz the assemblies are available in a choice of SMA or Type N male stainless steel connectors as standard but with other options available for custom designs.

Learn More

X-Band Miniature Amplifier: AGM-1005-15

AGM-mini-drThe newly introduced model AGM-1005-15 is a miniature X-Band amplifier, available from stock, which can be used in either connectorised or drop-in configuration and which features high reliability screening to MIL-STD-883 as standard. Covering the frequency range 8 to 12 GHz, this amplifier utilises thin film and MMIC technology to provide a very versatile and economical gain module for microwave applications.

Learn More