Renaissance Electronics

Company Profile

Renaissance logo 011414

Contact Information:


Title: National Sales Manager
Phone: (978) 772-7774
Fax: (978) 772-7775

Location:


Renaissance Electronics
12 Lancaster County Road
Harvard MA 01451
United States

Renaissance announces change in ownership

On August 1, 2013, Renaissance entered into, and closed on, a Stock Purchase Agreement with LEC Acquisition LLC, a Delaware limited liability company, and K Acquisition LLC, a Delaware limited liability company.  LEC Acquisition LLC owns 99% of Renaissance, and in turn is majority owned and controlled by Southvest Funds VI LP, a Delaware limited partnership. Southvest Funds VI is in turn controlled by Gen Cap America, a private investment firm headquartered in Nashville, TN.

Read more

Drop-In Isolator: 2H8BAC

2H8BACTo protect wide band X and Ku band amplifiers, Renaissance has designed a drop-in isolator covering two widely used communication bands in a .25” x .25” x .125” sub-compact package. Product features include an extremely broad bandwidth, a sub-compact size and wide temperature range. Insertion loss, 1.0 dB (max), Isolation 11 dB (min) and VSWR 2.0:1 (min.)

Learn More

Microstrip Isolator: 2W9NBV-S

2W9NBV-S

To protect space communication payload electronics, Renaissance has designed a 26.5 GHz microstrip isolator. The main features include compact size, low loss and high isolation. This device meets all of NASA's outgassing requirements. Some of the benefits include the capability of being used for space or harsh environments, protection of expensive amplifier circuits and optimization for space constrained applications.

Learn More

Ka Band Coaxial Isolator: 2A9NGV-2

2A9NHAFor SATCOM on-the-move (SOTM) terminals, Renaissance has designed a compact low loss isolator with K-connectors to support the bandwidth requirement of 27.5 to 30.5 GHz. The power handling on this model is 10 W forward and 1 W reverse but this package can be customized for up to 50 W forward and 10 W reverse.

Learn More

Ka-Band Coaxial Isolator: 2A9NHA

Ka band Coaxial Isolator, 2A9NHAFor SATCOM on-the-move (SOTM) terminals, Renaissance has designed a compact low loss isolator with K-connectors to support the bandwidth requirement of 27.35 to 31.7 GHz. The power handling on this model is 10 W forward and 1 W reverse, but this package can be customized for up to 50 W forward and 10 W reverse.

Learn More

X-Band Coaxial Isolator

X band Coaxial IsolatorTo protect expensive high power amplifiers operating at X-Band, Renaissance has developed a new broadband coaxial isolator that operates from 9 to 9.6 GHz and can handle 50 W reflected power. Insertion loss of 0.5 dB is maintained over -40 to +85 C.The reflected power is dissipated to the mounting surface with an extended heat sink that must be maintained below 50 C for CW operations.

Learn More

S-C Band Coaxial Isolator: 2A6BA

2A6BARenaissance has developed a new coaxial isolator that operates from 2 to 8 GHz in a single compact package size. Typical insertion loss is 0.5 dB and at band edges, the loss typically is 1.0 dB at room temperature. With return loss and isolation tuned to 14 dB at room temperature, this unit is ideal for EW Jammer type applications.

Learn More

Active Frequency Multipliers: HAFM Series

HAFM SeriesThe HAFM Series of active multipliers is available in models ranging from 30 to 100 GHz. A wide variety of multiplication factors from X2 up to X6 provide the customer with design flexibility for many applications. Basic multiplier circuits can be cascaded to achieve higher order multiplication factors.

Learn More

HMI / HMC Series - Isolators and Circulators

HMI AND HMC seriesThe HMI AND HMC series broadband ferrite junction isolators and circulators are available from 18 to 120 GHz. They utilize a low loss H-plane structure in a modified Y-junction format to provide minimum loss with maximum isolation and bandwidth. 2 GHz bandwidths with 20 dB of isolation are standard. Wider bandwidth, high power handling and magnetic shielding are available in select units.

Learn More

Drop-In Circulator: 3G6B Series

3G6BRenaissance has designed a high power drop-in Circulator for EW Jammer application. Covering 2.5 to 6 GHz, this isolator can handle 100 W of CW Power over -40 to +95 C. The design is covered under a US Patent that provides a broadband match and power handling using a unique steel housing.

Learn More

8-Way Divider: 10A3NB-8S

10A3NB-8SRenaissance Electronics has designed a high power divider that divides power from 6 to 18 dB across the output ports. Operating between 1100 and 1500 MHz, this 8-way divider has a footprint of 8” x 5”. The divider can handle 350 W peak and 35 W CW.

Learn More

2H2NFG: High Power Isolator

2H2NFGRenaissance has designed a high power drop-in isolator for IFF transceiver application. Covering 1020 to 1040 MHz, this isolator has just 0.40 dB of insertion loss over -30 to +70 C while handling 100 W forward and reverse power levels.

Learn More

Low Noise Amplifiers

Series HLNAHLNA Series of low noise amplifiers covers the frequency ranges from 20 to 100+ GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications. Custom designs are available and in many cases NRE is not required. MMIC technology is employed for high reliability and repeatability.

Learn More

R2H4NNB: S Band Drop-In Isolator

r2h4nnbRenaissance has developed a new low cost, high power, drop-in isolator to protect expensive amplifiers from unwanted reflected power levels at S band frequencies. Covering 2.7 to 2.9 GHz, this isolator provides a VSWR of 1.25:1 at input and output ports with loss of 0.4 dB and isolation of 20 dB over -30 to +85 C.

Learn More

3G3NAG: L-Band Drop-in Circulator

3G3NAG

Renaissance has released a new L-Band 4.5 kW peak power drop-in circulator operating from 1 to 1.12 GHz. With insertion loss of less than 0.2 dB and with return loss and isolation over 23 dB, the circulator is ideal to duplex an antenna with HPA and a receiver. This circulator has been customized to withstand 50 W of forward and 100 W of reverse power at the same instance without arcing or corona failures.

Learn More

Series HMPA and HHPA Power Amplifiers

HHPA-RevThe HMPA and HHPA Series of Medium and High Power Amplifiers covers select bands from 20 to 100 GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications. Custom designs are available and in many cases NRE is not required.

Learn More

X-Band Drop-in Isolator: 2H7NDQ

2H7NDQRenaissance has developed a new drop-in isolator to handle 15 W of reflected power in a compact size of 0.5” x 0.75” at X-Band frequencies. Covering 7.9 TO 8.4 GHz, this isolator provides a VSWR of 1.25:1 at input and output ports with loss of 0.5 dB and isolation of 20 dB over -40 to +85 C. It is specifically designed for Mobile Satellite architecture.

Learn More

RoHS Isolator: 2A3BAF

2A3BAFRenaissance Electronics has designed a new wideband Isolator, Model 2A3BAF-RoHS. This isolator operates over 950 to 1500 MHz with an 18 dB minimum isolation, 1.3:1 maximum VSWR and 0.4 dB maximum losses.

Learn More

Peak Power Circulator: 3G5NAJ

3G5NAJRenaissance has released a new S-band 2.5 kW peak power drop-in circulator operating from 2.9 to 3.3 GHz. With insertion loss of less than 0.6 dB and with return loss and isolation over 19 dB, the circulator is ideal to duplex an antenna with HPA and a receiver.

Learn More

Programmable Attenuator: 19A3BB-1

19A3BB-1Renaissance has developed a new solid state programmable attenuator that can be used to perform fading simulations. The device operates from DC - 3 GHz with 5.5 dB insertion loss and can attenuate 90 dB in 0.5 dB steps. The attenuator can handle 20 dBm over -40 to +85 C.

Learn More

X-Band Iso-Adapter: 2A8BAW

2A8BAWRenaissance has developed a new X-Band iso-adapter that is designed for high rel applications requiring waveguide to coaxial transition. Operating between 8.2 to 12.4 GHz, the iso-adapter provides 0.5 dB of loss and 18 dB of reverse isolation. The output is WR90 for the waveguide interface with UG135/U flange. Input is a type N-Female connector.

Learn More

Drop-In Circulator: R3G6NV

R3G6NVRenaissance Electronics has designed a drop-in circulator, Model R3G6NV. This Isolator operates 4.3 to over 5 GHz with a 20 dB minimum isolation, 1.20:1 maximum VSWR and 0.4 dB maximum loss.

Learn More

High Power Circulator: 3A2NGB

3A2NGBRenaissance has designed a high Peak and Average Power handling circulator covering 260 to 300 MHz. With low loss of 0.3 dB and isolation of 20 dB, it is optimized for Aeronautical Communications & Navigation applications.

Learn More

Isolator: 2A3BAF-RoHS

2A3BAF-RoHSRenaissance Electronics has designed a new wideband isolator, Model 2A3BAF-RoHS. This isolator operates over 950 to 1500 MHz with an 18 dB minimum isolation, 1.3:1 maximum VSWR and 0.4 dB maximum loss.

Learn More

X-Band Iso-Adapter: 2A8BAW

2A8BAWRenaissance has developed a new X-Band Iso-Adapter that is designed for high rel applications requiring waveguide to coaxial transition. Operating between 8.2 to 12.4 GHz, the iso-adapter provides 0.5 dB of loss and 18 dB of reverse isolation. The output is WR90 for the waveguide interface with UG135/U flange. Input is a type N-female connector.

Learn More

VHF Band Drop-in Isolator: 2SD2NAD

2SD2NADRenaissance has developed a new drop-in isolator to suppress mismatches in the receiver circuits at VHF band frequencies. Covering 420 to 450 MHz, this isolator provides a VSWR of 1.35:1 at input and output ports with loss of 0.7 dB and isolation of 18 dB over -40 to +85 C.

Learn More

Programmable Attenuator: 19A3BB-1

19A3BB-1Renaissance has developed a new solid state programmable attenuator that can be used to perform fading simulations. The device operates from DC – 3 GHz with 5.5 dB insertion loss and can attenuate 90 dB in 0.5 dB steps. The attenuator can handle 20 dBm over -40 to +85 C.

Learn More

Low PIM Attenuator: 19A3BC-XX

19A3BC-XXRenaissance Electronics has developed a new low PIM attenuator perfect for ATE applications which covers DC to 3.0 GHz. Available in multiple attenuation values and  handling 100 W CW, the attenuator exhibits -145 dBc of PIM distortion; making it ideal for test applications which require extremely low PIM.

Learn More

Programmable Attenuator: 19A3BA

19a3baRenaissance has developed a new solid state programmable attenuator that can be used to perform fading simulations. The device operates from DC - 3 GHz with 5.5 dB insertion loss and can attenuate 100 dB in 1 dB steps. The attenuator can handle 20 dBm over -40 to +85 C.

Learn More

Programmable Attenuator Delay Matrix

AttenuatorDelayMatrixRenaissance has designed a 12 x 12 programmable delay line (PDL) matrix that can be used to simulate targets for phased array radar and receiver optimization. Each of the 12 inputs is connected to dividers, programmable attenuators and a programmable delay line matrix.

Learn More

Programmable Attenuator-Delay Matrix: 18A4NAC

18a4nac Renaissance has designed a 12 x 12 programmable delay line (PDL) matrix that can be used to simulate targets for phased array radar and receiver optimization. Each of the 12 inputs is connected to dividers, programmable attenuators and a programmable delay line matrix. The amplitude and phase are controlled by custom software with custom defines UDP protocols.

Learn More

Peak Power Circulator: 3G5NAJ

3g5najRenaissance has released a new S-band 2.5 kW peak power drop-in circulator operating from 2.9 to 3.3 GHz. With insertion loss of less than 0.6 dB and with return loss and isolation over 19 dB, the circulator is ideal to duplex an antenna with HPA and a receiver.

Learn More

Low PIM Attenuator: 19A3BC-XX

19a3bcRenaissance Electronics has developed a new low PIM attenuator perfect for ATE applications which covers DC to 3.0 GHz. Available in multiple attenuation values and handling 100 W CW, the attenuator exhibits -145 dBc of PIM distortion; making it ideal for test applications which require extremely low PIM.

Learn More

Programmable Attenuator: 19A3BA

19a3baRenaissance has developed a new solid state programmable attenuator that can be used to perform fading simulations. The device operates from DC to 3 GHz with 5.5 dB insertion loss and can attenuate 100 dB in 1 dB steps. The attenuator can handle 20 dBm over -40 to +85 C.

Learn More

S Band Drop-In Circulator: 3A4NFB

3A4nfbRenaissance has developed a new S band drop-in circulator that is designed for amplifiers used in space applications. The isolator can operate between 2.2 to 2.4 GHz with 0.5 dB insertion loss and 20 dB isolation and return loss.

Learn More

Low Loss-High Isolation Waveguide Isolator: 2WR22NB

2wr22nbRenaissance Electronics has developed a new low loss, high isolation waveguide isolator for Satcom applications that covers 43 to 46 GHz with industry standard interface of WR 22. With loss of 0.5 dB and 18 dB isolation, it is ideal for low noise figure Satcom receivers.

Learn More

Ka-Band Waveguide Isolator: 2WR34NA

2wr34naRenaissance has developed a new Ka-Band waveguide isolator that is designed for downconverters used in space applications. The isolator can operate between 27.5 to 31 GHz with 0.15 dB insertion loss over 5% bandwidth and 20 dB isolation and return loss.

Learn More

Dual Junction Circulator: 3B2NARL

3B2NARLRenaissance has designed a new dual junction circulator for LTE application that can operate from 700 to 915  MHz and provide over 50 dB isolation within the band. Aimed for Test and Measurement application, this device can handle 100 W with -150 dBc intermod products."

Learn More

Ka Band Microstrip Isolator

MicrostripIsolatorRenaissance has designed a Ka band microstrip isolator that can handle 2 W forward and reverse for satcom applications. With a compact 5 x 6 mm size, it provides low insertion loss in the forward direction and high isolation in the reverse direction.

Learn More

Drop-in Circulator: 3G2NDR

3G2NDRRenaissance has produced a new low loss L-band high power drop-in circulator to protect PA's used in military radio transmitters.  Covering 1025 to 1095 MHz, this circulator has just 0.25 dB of insertion loss over -55 to +85 C while handling 1300 W peak at 1% duty cycle.

Learn More

High Power Circulator: 3A3NH

3A3NHFor the new EW and radar systems, Renaissance has designed a high performance circulator covering 1.25 to 1.40 GHz capable of handling 3 kW peak and 300 W average power levels. With low loss of 0.3 dB and isolation of 20 dB, it is optimized for airborne/flight applications.

Learn More

Delay Line Matrix: 18A4NAD

18A4NAD-FrontRenaissance Electronics has designed a 6 x 6 programmable delay line (PDL) matrix that can be used to simulate phased array radar and antenna testing. Each of the 6 inputs is connected to dividers, programmable attenuators (91/1 dB) and a programmable delay line (10 bit, 5 ps step, DC - 3 GHz) internally. 

Learn More

Drop-In Isolator: 2L9NEU-RoHS

42dropinisolator2LneuRenaissance Electronics has designed a new drop-in isolator for Satcom applications covering the 30 to 33 GHz frequency range (Model No. 2L9NEU-RoHS). The unit has less than 1 dB Insertion Loss and more than 16 dB Isolation and Return Loss over the temperature range -20 to +60°C.

Learn More

Power Amplifier: HHPAE-459

47hhpae-459hxiThe HHPAE-459 power amplifier covers the frequency range from 71.0 to 76.0 GHz. The amplifier has an output P1dB of +18 dBm with small signal gain of 29 dB. MMIC technology is employed for high reliability and repeatability.

Learn More

Gunn Oscillators: HGM and HGV Series

43hgmGunnThe HGM and HGV series Gunn Oscillators cover the 7 to 150 GHz frequency range. A wide variety of designs provide solutions for most applications. Units are available with mechanical and/or electrical tuning, providing many possible tuning configurations.

Learn More

Switch Matrix: Model 18A6BAB

18a6bab

Renaissance Electronics Corporation’s System Group has designed a dual 48 x 4 switch matrix for ATE applications that can cover from 700 MHz (LTE) to 6 GHz (Wi-Fi) frequencies. Using high reliability solid state switches, the switching speed is on the order of nanoseconds helping test handsets and other portable communication devices with minimum delay time.

Learn More

Microstrip Isolator: 2W9NBP

4929-31.5Renaissance has designed a Ka band microstrip isolator that can handle 2W forward and reverse for satcom applications. It is designed with a compact size of 5 x 6 mm case.  It provides low insertion loss in the forward direction and high isolation in the reverse.

Learn More

Drop-in Circulator: 3G2BDL

3g2bdlRenaissance’s new broadband circulator is ideal for transmitter protection application.  Operating over 962 to 1213 MHz, this device can withstand 2000 W peak and 20 W average power levels.  It is designed to sustain temperatures from -55 to +120 C while the loss is maintained below 0.5 dB.

Learn More

Gigalink LightSpeed™ Radio

51gigalinkIn an effort to address customer inputs and in the spirit of our commitment to continuous improvement, the Renaissance/HXI extremely low latency GigaLink LightSpeed radio link has been improved for ease of deployment and increased range performance.

Learn More

Compact Surface Mount: 3SLE2NAJ

3sle2najRenaissance's 3SLE2NAJ is a compact surface mount (0.394 sq-inch footprint) that covers 420 to 450 MHz. With a low insertion loss of 0.8 dB and isolation exceeding 15 dB over 0 to 55 C, it is ideal for short range PA system applications.

Learn More

Ultra High Power Circulator: C1-U35321

c1-u35321Renaissance has recently manufactured a 50 kW peak power circulator that can sustain 300 W CW operating at 775 to 920 MHz.  The input and output connectors are 7/8” EIA and the third port has a HN connector.

Learn More

Waveguide Isolator: R2WR426-1

2WR426-1Renaissance Electronics has developed a new low loss, high isolation waveguide isolator for Satcom applications that covers 20.2 to 21.2 GHz with industry standard interface of WR 42. With loss of 0.2 dB and 26 dB isolation, it is ideal for low noise figure Satcom receivers.

Learn More

Waveguide Isolator

waveguideisolatorTargeting the receive side requirements for a low loss waveguide isolator, Renaissance has developed a product with less than 0.2 dB insertion loss over 20.1 to 21.2 GHz from -40 to +85 C. Ensuring more than 26 dB isolation, the unit improves system performance considerably. With a size of 1.5" x 0.88" x 0.5", it can handle up to 50 W of forward and 5 W of reverse power.

Learn More

HLNAV-364 Low Noise Amplifier

2HXIHLNAV-364The HLNAV-364 Low Noise Amplifier covers the frequency range from 50 to 65 GHz minimum and is usable over a wider range. The unit offers a minimum of 25 dB of gain over that range. The LNA bandwidth is matched to the frequency range of WR-15 waveguide-to-coax adapters allowing it to be used for broadband test setups.

Learn More

Series HMPA and HHPA High Power Amplifiers

5HXIhmpa_hhpa100Renaissance Electronics Corporation/HXI is pleased to announce our lines of HMPA and HHPA Medium and High Power Amplifiers which cover the frequency range from 8 to 100 GHz. New models for 2010 include 28-32 GHz and 32-36 GHz units as well as several new designs in V-Band and W-Band.

Learn More

Series 60 GHz Power Amplifiers HHPAV-362

6HXI60ghzpower100Renaissance Electronics Corporation/HXI is pleased to showcase the HHPAV-362 Power Amplifier it covers the frequency range from 59 to 61 GHz and is usable to 65 GHz. MMIC technology is employed for high reliability and repeatability. The amplifier can be used in transmitters for communication and radar systems and also as part of test equipment suites.

Learn More

Ferrite Devices

image001_100Since 1991 Renaissance has been a key supplier of Ferrite devices for major military and commercial applications. These state of the art Isolators and Circulators cover the frequency range from 40 MHz to 120 GHz with low insertion loss and High Isolation specifications.

Learn More

Power Amplifier: HRAD6.5-005

Ren-100The HRAD6.5-005 Power Amplifier /Upconverter covers the frequency range from 5.5 to 7.0 GHz and is usable to 7.2 GHz. MMIC technology is used to achieve high reliability and repeatability. An output level of 3.5 W saturated has been achieved. The SSG is 40 dB at 6.5 GHz. Multiple devices buffered by ferrite junctions used to achieve the best circuitry allowing the use of a single bias to power the amplifier.

Learn More

Circulator: 3G7BH

3G7bhoctav100Renaissance has designed a new octave band drop-in circulator, 3G7BH that covers a bandwidth of 5.2 to 11 GHz over -20 ° to +85° C. With insertion loss less than 0.95 dB over the entire band, the circulator is robust to handle 20 W of incident RF power. Return loss and isolation of 13 dB ensures better match to the RF circuitry where it's being placed.

Learn More

Power Amplifier: HHPAV-362

362-PowerAmp200Renaissance Electronics Corporation/HXI is pleased showcase the HHPAV-362 Power Amplifier it covers the frequency range from 59 to 61 GHz and is usable to 65 GHz. MMIC technology is employed for high reliability and repeatability. The amplifier can be used in transmitters for communication and radar systems and also as part of test equipment suites.

Learn More

Coaxial Circulator: Model #3A2BFC

coaxialCir3A2BFC100In view of LTE requirements, Renaissance Electronics Corporation has developed a coaxial circulator operating from 700 to 960 MHz. It is available in standard 1.50” x 1.67” footprint and can withstand 150 watts of CW power and offers insertion loss of 0.7 dB over -40 to +75C. This makes the design attractive for both indoor and outdoor applications.

Learn More

RF Interface DAS Panel: Model # 15C2NM

DASpanel100Designed specifically for WiMAX Base station, Renaissance Electronics’ 15C2NM is the RF interface DAS panel that duplexes the BTS port for Rx/UL and Tx/DL channels with the help of a circulator. The power levels on the UL and DL can be adjusted by the use of fixed and manual rotary attenuators.

Learn More

RF Interface DAS Panel: Model # 15C2NX

DASpanel15C2NX200The 15C2NX is the RF interface DAS panel that duplexes the BTS port for Rx/UL and Tx/DL channels with the help of a circulator.The power levels on the UL and DL can be adjusted by the use of fixed and manual rotary attenuators. The minimum isolation between channels is 50 dB and with insertion loss of less than 2 dB in the through paths.

Learn More

Switch Matrix - 48 x 4: 18A6BAB

SwitchMatrix100This newly designed dual 48 x 4 switch matrix for ATE applications can cover from 700 MHz (LTE) to 6 GHz (Wi-Fi) frequencies. Using high reliability solid state switches, the switching speed is on the order of nanoseconds helping test handsets and other portable communication devices with minimum delay time.

Learn More

In-Band Duplexer

In-bandDuplexerRenaissance Electronics has designed an in-band duplexer for LTE cell site applications. In a very compact footprint of 4.75” x 3.15”, the duplexer provides 30 dB of rejection between the Tx and Rx. The insertion loss is less than 1 dB.

Learn More

Power Amplifier: HHPAV-433

AmpHHPAV433The HHPAV-433 Power Amplifier covers the frequency range from 59.5 to 60.5 GHz and is usable over the range of 58 to 64 GHz. The amplifier has an output power of +28.5 Psat and 18 dB gain.  A single +6.0V bias is used to power up the amplifier.

Learn More

Low Noise Amplifier

AmpHLNAV360-WR15The HLNAV-360 is a low noise amplifier with integrated isolators at the input and output ports. The LNA operates over the 57 to 64 GHz frequency band with 27 dB gain, noise figure of 6.0 Db and a P1dB of +12 dBm. RF interfaces are via WR-15 waveguide with standard UG-385/U flanges.

Learn More

High Power Isolators and Circulators

HPisolatorsCirculatorsThe HMC10H and HMI10H series High Power Circulators and Isolators operate in the 75 to 110 GHz waveguide band. They handle up to 20 W of average power and 350 W peak. A RF bandwidth of 2 to 3 GHz and isolation of 18 dB are typical. These devices are used to buffer mismatches, signal duplexers, and to couple amplifier stages.

Learn More

Amplifier: HHPAW-441

AmpHHPAW-441The HHPAW-441 is a W-Band pulsed high power amplifier that offers +27 dBm (½ W) of RF power over the range from 92 to 96 GHz. This amp can be operated with a variable pulse rate from CW to 100 nS. The amplifier uses the latest MMICs that are power combined for the maximum RF power and gain.

Learn More

Downloads

RF Interface DAS Panel

Designed specifically for WiMAX Base station, Renaissance Electronics 15C2NX is the RF interface DAS panel that duplexes the BTS port for x/UL and Tx/DL channels with the help of a circulator.

Download

Power Amplifier

The HRAD6.5-005 Power Amplifier /Upconverter covers the frequency range from 5.5 to 7.0 GHz and is usable to 7.2 GHz. MMIC technology is used to achieve high reliability and repeatability.

Download

60 GHz Power Amplifier HHPAV-433

The HHPAV-433 Power Amplifier covers the frequency range from 59.5 to 60.5 GHz and is usable over the range of 58 to 64 GHz. The amplifier has an output power of +28.5 Psat and 18 dB gain.

Download

60 GHz Power Amplifier HHPAV-362

The HHPAV-362 Power Amplifier covers the frequency range from 59 to 61 GHz and is usable to 65 GHz. MMIC technology is employed for high reliability and repeatability.

Download

Series HMI & HMC Isolators & Circulators

The HMI AND HMC series broadband ferrite junction isolators and circulators are available from 18 to 120 GHz. They utilize a low loss H-plane structure in a modified Y-junction format to provide minimum loss with maximum isolation and bandwidth.

Download

Series HLNH Low Noise Amplifiers

The HLNA Series of Low Noise Amplifiers covers the frequency ranges from 20 to 100+ GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications.

Download

Waveguide Isolator

Renaissance Electronics has developed a new low loss, high isolation waveguide isolator for Satcom applications that covers 20.2 to 21.2 GHz with industry standard interface of WR 42.

Download

Ultra High Power Circulator

Renaissance has recently manufactured a 50 kW peak power circulator that can sustain 300 W CW operating at 775 to 920 MHz.

Download

48 x 4 Switch Matrix

Renaissance Electronics Corp. System Group has designed a dual 48 x 4 switch matrix for ATE applications that can cover from 700 MHz (LTE) to 6 GHz (Wi-Fi) frequencies.

Download

Series HGM & HGV Mechanically-Tuned Gunn Oscillators & VCOs

The HGM and HGV series Gunn Oscillators cover the range from 7 to 110 GHz. A wide variety of designs provide the user with a solution for most applications.

Download

Drop In Isolator

New drop-in isolator for the 30 GHz Satcom application that covers 30 to 33 GHz with less than 1.0 dB insertion loss while providing 16 dB of return loss and isolation in a rugged steel housing construction.

Download

962 - 1213 MHz, Drop-In Circulator

Renaissance has designed a high power circulator for antenna protection in military radio transceiver applications.

Download

430 MHz Surface Mount Circulator

Renaissance Electronics’s 3SLE2NAJ is a low power handling surface mount circulator operating between frequency range of 420 to 450 MHz.

Download

6 x 6 Progammable Delay Line Matrix

Renaissance Electronics has designed a 6 x 6 Programmable Delay Line (PDL) Matrix that can be used to simulate phased array radar and antenna testing.

Download

1300 MHz High Power Circulator

Renaissance has designed a very high Peak and Average Power handling circulator covering 1.25 to 1.4 GHz in a compact size of 1.5 by 1.67 by 1.01 inches.

Download

KaBand Microstrip Isolator

Renaissance Electronics has designed a low loss 30 GHz microstrip isolator for Satcom application. The design covers 29 to 31.5 GHz with less than a dB loss and provides 20 dB of isolation over -40 to 85 degree C temperature range.

Download

700 - 915 MHz, Dual Junction Circulator

Renaissance has designed a high isolation dual junction circulator for Test and Measurements applications. Covering 703 to 915 MHz, this circulator provides over 50 dB of isolation within the band and < 1 dB loss and 20 dB return loss.

Download

1.025 - 1.095 GHz, Drop-In Circulator

Renaissance has designed a high power circulator for military radio transceiver application. Covering 1025 to 1095 MHz, this circulator has just 0.25 dB of insertion loss over -55 to +85 C while handling 1300 W Peak @ 1% duty cycle.

Download

Quasi Drop-In Circulator for Space Applications

Renaissance has developed a new S band drop-in circulator that is designed for amplifiers used in space applications. The isolator can operate between 2.2 to 2.4 GHz with 0.5 dB insertion loss and 20 dB isolation and return loss.

Download

43 - 46 GHz, Waveguide Isolator

Renaissance Electronics has developed a new low loss, high isolation waveguide isolator for Satcom applications that covers 43 to 46 GHz with industry standard interface of WR 22.

Download

Waveguide Isolators for Space Applications

Renaissance has developed a new Ka band waveguide isolator that is designed for downconverters used in space applications.

Download