The following booth numbers are complete as of July 6, 2016.
Massachusetts BayTechnologies
Booth 105
Attenuator Chips
Massachusetts Bay Technologies’ aluminum nitride fixed attenuator chips are fabricated using its state-of-the-art thin film process and advanced photolithography technology. All devices are available in chip form with a metalized ground connection on the back. This ground is wrapped around on the four corners of the chip so additional ground bonding ribbon is not required. The chips may be attached using conductive epoxy or solder preform. Gold contacts on the input and output pads make assembly, using standard bonding equipment, fast and reliable. Custom values available on request.
www.massbaytech.com
CapeSym Inc.
Booth 109
SYMMIC
Still waiting to learn how hot your newest design is? Stop waiting. Thermal analysis with SYMMIC frees you from dealing with complex geometric modeling, meshing and analysis packages. Easily assemble integrated circuits from pre-optimized analysis templates for the foundry process. Assemble MMICs into transmit/receive modules, and modules into subsystems. Analysis at any stage yields boundary conditions for earlier stages to accurately calculate FET junction temperatures. SYMMIC facilitates both steady-state and transient analysis inside your existing RF design tools.
www.capesym.com
Altair Engineering
Booth 111
FEKO Software Tool
FEKO, part of the Altair HyperWorks® suite, is a state-of-the-art computational electromagnetic simulation software tool that enables users to solve a wide range of electromagnetic problems. Typical applications include analyses of horns, radiation patterns and hazard zones, wire, reflector, conformal, and broadband antennas, microstrip patches, arrays, antenna placement and design. Analyses related to EMC (including shielding & cable coupling), RCS (scattering problems), waveguide structures (RF components), SAR extraction (bio-electromagnetics), and multiple dielectric layers (radomes) are also covered.
www.altair.com
AEM Inc.
Booth 113
Tin Whisker Mitigation Process
AEM’s Tin Whisker Mitigation process utilizing tin-lead conversion with fusion processing ensures system reliability for mission critical programs. AEM’s process is suitable for surface-mount chips, surface-mount molded body packages as well as other unique package styles. Components post tin-lead conversion can then be screened to many MIL-STD and customer source control drawing test requirements.
www.aem-usa.com
Anritsu
Booth 121, SI8
VectorStar VNAs
For applications ranging from microwave component testing to on-wafer device characterization, the VectorStar™ vector network analyzer family uses nonlinear transmission line (NLTL) technology to provide best-in-class performance — and it’s only from Anritsu. Get the confidence you need in every VNA measurement. Visit Anritsu’s Booth 121 and additional Booth SI8 in the Signal Integrity Zone at EDI CON USA.
www.anritsu.com/VectorStar
Tech-X Corp.
Booth 125
VSim
VSim is a high performance code using the FDTD method. VSim excels at solving large electromagnetic problems with complex materials. Also, VSim offers particle solutions for performing multipacting analysis and the solution of vacuum electron amplifiers such as klystrons and gyrotrons. In addition, VSim enables you to switch easily between 1, 2, or 3 dimensions to save time in performing your quick analysis.
www.txcorp.com/vsim
NexTek
Booth 129
Wideband Lightning and Surge Protection
NexTek is a leading manufacturer of coaxial RF surge arrestors for protection against lightning, HEMP/NEMP and ESD energy. One of NexTek’s wideband solutions is the QWSNFNF0600 device, an always-on quarter wavelength shorted stub design which provides unmatched surge performance and toughness along with an ultra-wide RF passband. NexTek, experts in coaxial RF surge protection, designs and builds everything it sells in the U.S. and provides a 10-year warranty. Contact NexTek directly for selection help or samples.
www.nextek.com
Mitsubishi Electric Corp
Booth 206
Transistor Modules
Mitsubishi Electric Corp. commercially launched new silicon RF high-output metal-oxide-semiconductor field-effect transistor (MOSFET) modules capable of automatic mounting on printed circuit boards of professional radio equipment. High-power amps for professional radio equipment commonly are mounted on their cabinets with screws. Product features include first automatic-mounting MOSFET module in the 60 W output class, optimized circuit design reduces size, weight and power consumption, and two module types available as a pair for professional radio equipment transmitters.
www.mitsubishielectric-usa.com
Anokiwave
Booth 208
Silicon Core ICs
Anokiwave offers a family of silicon quad core AESA ICs at X- and K/Ka-Bands for 5G, commercial RADAR, SATCOM and A&D markets. Anokiwave’s product portfolio of Si Core ICs and System-in-Package solutions allows its customers the fastest-time-to-market possible, with expert systems engineering and optimal technology solutions.
www.anokiwave.com
Agile Microwave Technology Inc.
Booth 210
Broadband 15 W Power Amplifier
Agile MwT’s new broadband 15 W power amplifier operating from 2 to 18 GHz is offered in a bench top box or in a compact module configuration. AMT-A0350 provides Psat of 15 W with flat small signal gain of 43 dB typical, ±1 dB typical gain flatness with VSWR of 1.8:1 typical. The family of these PAs are competitively priced and ship from stock or short lead time. Agile MwT offers great value with some of the most innovative designs in the industry.
www.agilemwt.com
Southwest Microwave Inc.
Booth 212
SSBP High-Performance Multi-Port Cable Harnesses
Save space, reduce panel weight and size, and achieve greater bandwidth with Southwest Microwave’s size 8, 12, 16 and 20 SSBP coax contacts and cable harnesses to 110 GHz for standard multi-port connectors such as D-38999, D-Subminiature or Micro-D. Combine RF/microwave coax contacts of varying frequencies in one housing to optimize multi-functionality, packaging design flexibility and cost savings. Miniaturized packaging offers increased density, improved survivability, easier servicing and a more compact footprint.
www.southwestmicrowave.com
Integrated Device Technology (IDT)
Booth 213
RapidIO Switches
Need to connect clusters of embedded processors in a peer-to-peer network? IDT’s portfolio of RapidIO switches delivers the ultra-low latency and scalability for speeding the movement and processing of data, meeting the needs of demanding applications like mobile edge computing, high-performance computing and data analytics. The company recently introduced its new 5G-ready RXS family of switches, with switching performance of up to 600 Gbps in a single switch or 4.8 Tbps at rack scale.
www.idt.com/go/srio
Mini-Circuits
Booth 215
Wideband MMIC Balun Covers 2000 to 7000 MHz in 3 x 3 mm QFN
Mini-Circuits’ MTX2-73+ is a wideband MMIC balun transformer with an impedance ratio of 2:1 covering a wide range of applications from 2000 to 7000 MHz. Fabricated using IPD process technology, this model provides outstanding repeatability with 0.6 dB insertion loss, 0.8 dB amplitude unbalance, 4° phase unbalance, and RF power handling up to +34 dBm (2.5 W). The unit comes housed in a 3 × 3 × 0.8 mm QFN package.
75 Ω MMIC Amplifier Supports DOCSIS® 3.1 Bandwidth Requirements
Mini-Circuits’ PGA-122-75+ is a 75 Ω MMIC amplifier with a 40 to 1500 MHz frequency range, supporting a wide range of applications including DOCSIS 3.1 systems and equipment. This model provides 15.5 dB gain with ±0.1 dB flatness, +43 dBm IP3, +54 dBm IP2, 21 dB reverse isolation and 2.9 dB noise figure. It operates on a single 9 V supply and comes housed in a tiny SOT-89 package.
USB/Ethernet Controlled High-Sensitivity Power Sensors, 50 to 6000 MHz, -45 to +10 dBm
Mini-Circuits’ PWR-6LRMS-RC is a USB/Ethernet controlled power sensor for high-sensitivity measurement of CW, multi-tone and modulated signals over frequencies from 50 to 6000 MHz with dynamic range from -45 to +10 dBm. The power sensor is provided with Mini-Circuits’ user-friendly GUI control software which provides measurement averaging, time-scheduled measurements, and multi-sensor support (up to 24), as well as DLLs for 32- and 64-bit Windows® systems.
2-Way, 0° MMIC Splitter/Combiner Covers 0.5 to 9.5 GHz in 5 × 5 mm Package
Mini-Circuits’ new EP2W1+ MMIC 2-way, 0° splitter/combiner offers an industry-leading combination of bandwidth and tiny size, covering applications from 0.5 to 9.5 GHz in a 5 × 5 mm QFN. The splitter/combiner provides low insertion loss (1 to 3.4 dB), 19 dB isolation, 0.1 dB amplitude unbalance and 3° phase unbalance. It handles up to 2.5 W RF input power as a splitter and has an ESD rating of HBM Class 2.
Wideband Surface-Mount Limiter, 30 to 3000 MHz, +17 to +30 dBm
Mini-Circuits’ RLM-33H+ is a surface-mount limiter ideal for protecting sensitive receiver circuitry from unwanted high-power signals. This model has a frequency range from 30 to 3000 MHz and input power range from +17 to +30 dBm. It provides low output power of +18 dBm, 0.2 dB ∆ output/1 dB ∆ input, 16 ns recovery time, 0.23 dB insertion loss and 1.05:1 VSWR. The unit measures 0.25" × 0.31" × 0.16".
Wideband Double Balanced MMIC Mixer Die, Level 15, 2200 to 7000 MHz
Mini-Circuits’ MDB-73H-D+ is a wideband double-balanced level 15 MMIC mixer die with an IF bandwidth from DC to 1600 MHz and LO/RF bandwidth from 2200 to 7000 MHz. This model provides 9 dB conversion loss, 46 dB L-I isolation, 35 dB L-R isolation and good input/output return loss over its full frequency range without the need for external matching components. Available in gel-paks, partial and full production wafers.
Connectorized High-Pass Filter Provides Passband from 3800 to 6000 MHz
Mini-Circuits’ ZFHP-3800+ is a connectorized high-pass filter with a passband from 3800 to 6000 MHz supporting a variety of transmitter/receiver applications. This model provides low passband insertion loss of 1 dB, high stopband rejection of 27.3 dB, and RF input power handling of 2 W. The filter comes housed in a compact aluminum alloy case (1.25" × 1.25" × 0.75") with SMA connectors.
Coaxial Triplexer Separates C-Band and L-Band Input Signals
Mini-Circuits’ ZTPL-4620+ is a coaxial (SMA) triplexer with a lowpass channel-1 from 9.8 to 10.2 MHz, bandpass channel-2 from 852 to 1872 MHz, and highpass channel-3 from 3300 to 4620 MHz. This model is ideal for separating C-Band and L-Band signals on the common port and routing them non-interactively to separate output ports. It also routes a 10 MHz reference signal on the fourth port to the common port.
Ultra-Thin, 4-Way, 0° Splitter/Combiner Accommodates Tight Layouts, 500 to 3000 MHz
Mini-Circuits’ ZN4PD-33SMP+ is a 4-way 0° splitter/combiner covering the 500 to 3000 MHz band with 0.9 dB insertion loss, 22 dB isolation, 0.2 dB amplitude unbalance and 3° phase unbalance. It handles up to 10 W RF input power as a splitter and 1.0A DC current (250 mA each port). The splitter comes in an ultra-thin aluminum alloy case measuring 3.10" × 3.28" × 0.30" with blind mate SMP snap-on connectors.
X4 Surface-Mount Multiplier
Produces Output Signals from 3600 to 4400 MHz
Mini-Circuits’ RKK-4-442+ ´4 frequency multiplier converts input frequencies from 900 to 1100 MHz into output frequencies from 3600 to 4400 MHz. This model achieves low conversion loss of 24.5 dB with high rejection of unwanted harmonics (F3, 23 dBc; F5, 31 dBc). It provides RF input power range from +19 to +23 dBc, and comes housed in a miniature shielded surface-mount package (0.50" × 0.50" × 0.18").
www.minicircuits.com
Dynamic Engineers Inc.
Booth 216
Low Power, High Stability OCXO
Dynamic Engineers is now offering a new line of ultra low power, low noise, and highly stable OCXOs from Magic Xtal. The M037/14L, MX037/14 and MX037/8 series feature a height profile as low as 8 mm with a frequency range of 8 to 300 MHz. Typical warm-up time is 30 s and power consumption is less than 180 mW. Stability over temperature can attain less than 1 ppb over -40°C to +85°C, and daily aging can reach less than 0.1 ppb per day.
www.dynamiceng.com
L3 Narda-MITEQ
Booth 218
Low Cost, Low Noise Fiber-Optic Link
L-3 Narda-MITEQ announced a new low noise fiber-optic link product, the SBL-3000. The SBL fiber-optic transmitter and receiver was designed for customers looking for low cost, high performance fiber-optic links for analog and digital applications such as antenna remoting and interfacility data links. The SBL-3000 components are plug and play with a frequency range of 10 to 3000 MHz and 110 dB/Hz2/3 SFDR.
www.nardamiteq.com
Accurate Circuit Engineering
Booth 221
3D PCB
Accurate Circuit Engineering is proud to announce the first 3D PCB. Most printed circuit boards are 2D and flat with a milled area or cavity. ACE using it’s unique routing, milling and beveling Technology has successfully produced a circuit board that actually has a 3D topography. There is nothing mounted or attached to the PCB shown here it is all machined and plated at ACE. See this unique and exciting PCB technology at Booth 221.
www.ace-pcb.com
International Manufacturing Services Inc.
Booth 223
Partial Wrap Resistors
IMS’ partial wrap resistors are industry leaders in high frequency performance. However, they were only available in low power versions – until now. Announcing the new IMS partial wrap resistors on aluminum nitride (AlN). These new AlN partial wraps offer the same excellent high frequency performance as their alumina counterparts combined with the superior thermal performance of AlN. Instead of trading-off high frequency performance for power handling, or vice versa, you can now have both. No frequency trade-off. No power trade-off. Request your sample today.
www.ims-resistors.com
Ardent Concepts
Booth 229
TR Multicoax Series
TR Multicoax series delivers superior signal integrity from multiple GHz channels. With a choice of 20 GHz, 40 GHz or 70 GHz configurations, all using the same footprint, users can upgrade their connectors as data rate requirements of their applications increase. TR is the highest-density high speed multicoax connector on the market. The interface is compression-mount and can be reused across programs which drives lower total cost of testing by avoiding costly solder-down components, like SMAs, that can- not be recovered.
www.ardentconcepts.com
Transline Technology Inc.
Booth 304
RF/Microwave, Hybrid and Standard Printed Circuit Boards
Transline serves the RF, microwave, aerospace, defense, medical and satellite industries among others, to create solutions for ever-advancing concepts and designs. Features and services include RF and microwave applications, hybrid and exotic materials, oversized (large) PCBs, FEP bonding and fusion bonding, Rigi-Flex & Flex PCB, PCB thermal applications, heavy metal back PCB, PCB heat-sink manufacturing and lamination, photo chemical etching & RF shielding products. AS9100C certified, ISO 9001:2008 certified, ITAR registered, SBA SDB 8(a) certified and JCP certification (Cage Code: 3LRM5).
www.translinetech.com
Marki Microwave
Booth 305
T3 MMICs
Since 2013 Marki Microwave has offered small form factor chip style double balanced mixers such as the Microlithic® and MMIC lines of mixers that cover from 1 GHz to 67 GHz. Now Marki is proud to introduce the new MT3 line of small form factor, high linearity mixers. These integrated mixers offer the high linearity (IP3, P1dB, spurious suppression) and low conversion loss of the T3, but with the size and production scaling benefits of a MMIC.
www.markimicrowave.com
Synergy Microwave Corp.
Booth 306
Phase Locked Ultra Low Noise Signal Sources
Synergy Microwave Corp. introduces a series of ultra-low phase noise, fixed-frequency, phase-locked DRO oscillators (PLDRO). The KSFLOD1280-12-1280 is a 12.8 GHz fixed frequency, source which, when locked to a low noise reference at 1200 MHz, will deliver exceptional phase noise of -96 dBc/Hz at 100 Hz offset and -158 dBc/Hz at 10 MHz offset. This source is packaged in a 2.25"× 2.25"module housing and includes lock alarm. Options are available to 15 GHz and extendable to 30 GHz.
www.synergymwave.com
SV Microwave
Booth 308
High Density, High Performance Precision Connections
Looking for subminiature high density, high performance solutions? Check out SV Microwave’s complete line of SMP, SMPM and SMPS products. Features include Blindmate design for quick installation, COTS versions readily available, cable connectors for 0.047, 0.065, 0.085, conforms to MIL-STD-348, board mounts, edge launch, adapters, VITA 67, tape and reel packaging availablability, and DC to 40 GHz (SMP), DC to 67 GHz (SMPM), DC to 100 GHz (SMPS).
www.svmicrowave.com/products/search
MACOM
Booth 309
Octave Tuning VCO
MACOM introduces new 10 to 20 GHz octave tuning voltage controlled oscillator for the test and instrumentation market space. The MAOC-415000 offers excellent phase noise performance, typically -100 dBc/Hz at 100 kHz offset. The part draws 70 mA total current from a 5 V supply, and operates over the tune voltage range 0 to 20 V. Output power is 3 dBm with excellent pushing and pulling performance. The MAOC-415000 is available in a 4×4 mm package and operates over the -40° to +85 C° temperature range.
www.macom.com
National Instruments
Booth 313
Second-Generation Vector Signal Transceiver
NI’s recently released second-generation VST combines a 6.5 GHz RF vector signal generator, 6.5 GHz vector signal analyzer, high-performance user-programmable FPGA and high-speed serial and parallel digital interfaces into a single 2-slot PXI Express module. With 1 GHz of bandwidth, the latest release of the VST is ideally suited for a wide range of applications including 802.11ac/ax device testing, mobile/Internet of Things device testing, 5G design and testing, RFIC testing, radar prototyping and more.
www.ni.com
NI AWR
Booth 313
AntSyn™
AntSyn™ is an evolution in antenna design. A cloud-based, SaaS automated antenna design, synthesis, and optimization tool, AntSyn operates on a “what you want is what you get” principle. The user inputs the antenna requirements rather than a (parameterized) physical design and the software produces antenna designs as outputs. AntSyn was designed by antenna engineers to be used by all levels of experience, from experts to those who are relatively new to antenna design.
www.ni.com/awr
Focus Microwaves
Booth 312
RAPID Digital Tuner
The RAPID digital tuner is the heart of a precision, high-speed, load-pull device characterization system. It has been developed by Focus’ UK subsidiary MESURO and is suitable for every phase of the design and production test cycle. This series of new digital tuner products provide performance, reliability and cutting edge features. The RAPID can be used as a stand-alone impedance synthesis and measurement system, or combined into a hybrid solution when paired with Focus’ MPT series harmonic tuners.
www.focus-microwaves.com
EMSCAN
Booth 320
ERX+
EMSCAN’s ERX+ enables the PCB and design engineers to diagnose EMC/EMI problems between 150 kHz and 8 GHz. ERX+ provides 7 levels of resolution (110 microns to 7.5 mm). Level 1 resolution (7.5 mm) allows the engineers to visualize the hot spots, current loops or intermittent problems) in real-time. After locating the unintended radiators, engineers can select the resolution level based on the density of their board design. The built-in spectrum analyzer turns ERX+ into a plug-and-play test system.
www.emscan.com
Keysight Technologies Inc.
Booth 321
5G Waveform Generation and Analysis
Keysight’s 5G waveform generation and analysis testbed reference solution combines hardware, software and measurement expertise providing the essential components of a flexible 5G waveform generation and analysis test platform. Its flexibility allows broad “what if?” analysis to evaluate proposed waveforms with prototype algorithms and hardware. It can easily create waveforms at RF, microwave and mmWave frequencies with modulation bandwidths of up to 2 GHz, allowing engineers to evaluate early concepts that use a variety of modulation schemes at different frequencies and bandwidths.
www.keysight.com/find/solution-5Gtestbed
Presto Engineering
Booth 324
Wafer Level RF Test Services
Presto Engineering’s services cover all aspects of test—test plan development to hardware and software development, to validation, correlation, ramp and production. Their application coverage extends from DC to microwave and millimeter wave, up to 100 GHz.Capabilities include all major ATE brands, digital, analog, RF and advanced RF, E, V, Ka/K/Ku-Band, frequency domain, time domain (Bert), CMOS and SiGe, GaAs, InP and GaN.
www.presto-eng.com
AdTech Ceramics
Booth 326
AdTech Ceramics offers custom HTCC microwave packages and hermetic feedthroughs for high-reliability applications including microwave spectrometry, high power and high frequency applications up to 95 GHz. Capabilities include electromagnetic and thermal modeling and simulation for microwave packages in the X- through W-Band frequency ranges. AdTech’s manufacturing facility has a 45+ year history of designing, tooling and manufacturing multilayer ceramic packages and feedthroughs and includes a custom design center. The U.S. based company is AS9100C and ISO 9001:2008 certified.
www.adtechceramics.com
Lake Shore Cryotronics
Booth 327
Cryogenic Probe Stations
Lake Shore Cryotronics’ industry-leading cryogenic probe stations enable DC, RF or microwave measurements at temperatures as low as 1.6 K and in fields to over 2 T for early-stage device research. Plus, Lake Shore is now offering on a pre-order basis, a new, unique THz probe arm option. Designed for precise on-wafer probing of millimeter wave devices at 75 to 110 GHz and 140 to 220 GHz frequencies, it allows calibrated S-parameter and other high-frequency measurements to be performed in a cryogenic environment.
www.lakeshore.com
Applied Thin-Film Products
Booth 328
Microstrip Transmission Lines Engineering Kits
Applied Thin-Film Products (ATP) is pleased to offer new microstrip transmission lines engineering kits to help your bread-boarding needs with a cost effective solution. Engineering kits are readily available on .005" (0.127 mm), .010" (0.254 mm), .015" (0.381 mm), .020" (0.508 mm), .025" (0.635 mm) thick ss-fired alumina. Each engineering kit contains a variety of single transmission lines with or without tuning pads, in lengths of 0.50" (1.270 mm), .075" (1.905 mm), .100" (2.540 mm), .125" (3.175 mm), .150" (3.810 mm), .200" (5.080 mm), .250" (6.350 mm) and .500" (12.700 mm).
www.thinfilm.com
Reactel Inc.
Booth 404
RF & Microwave Filter, Multiplexer and Multifunction Assembly
Visit Reactel in Booth 404 to see their latest RF and microwave filter, multiplexer and multifunction assembly offerings. Their booth will feature high performance notch filters which are perfect for co-location interference issues. While speaking to Reactel’s engineers, be sure to inquire about their entire line of application specific surface mount, connectorized and high power filters covering up to 50 GHz.
www.reactel.com
Zentech Manufacturing
Booth 406
RF Manufacturing Process
Zentech’s senior management team has broad experience in the RF, defense, medical and telecom industries. Providing RF product realization services from concept through full life cycle management, Zentech has a proven track record of successful RF programs in a variety of disciplines. Zentech operates out of an ITAR registered, ISO compliant, 42,000 sq. ft. facility in Baltimore, Md. Zentech is an engineering-driven, agile facility equally experienced in new product introduction (NPI) and program level manufacture of RF assemblies.
www.zentech.com
ANSYS
Booth 408
ANSYS HFSS
ANSYS HFSS, the industry standard 3D full wave electromagnetic field simulation software, includes advancements that will allow you to dominate your wireless communication competitors. New features include antenna synthesis, design and processing; encrypted 3D components with patent-pending hidden and encrypted design; and new high frequency solvers for antenna placement and radio frequency interference (RFI) diagnosis. See why this highly automated and collaborative wireless design flow is ideal for designing IoT devices, wearable electronics, 5G, UAV and automotive radar and more.
www.ansys.com
Analog Devices Inc.
Booth 409
AD9162 D/A Converter
The new AD9162 D/A converter provides broadband and wireless service operators with the industry’s highest bandwidth and dynamic range to satisfy rising consumer demand for higher quality, always-on data and video streaming without requiring expensive, large-scale architecture or converter design changes. Also, the new AD9164 D/A converter allows designers of military and commercial radar and precision instrumentation equipment to lower system cost and complexity by eliminating FPGAs and other digital circuitry and software previously required to rapidly switch across multiple frequency channels.
www.analog.com
Rohde & Schwarz
Booth 413
Phase Noise Analyzer
The R&S FSWP phase noise analyzer and VCO tester enables ultra sensitive and ultra-fast phase noise measurements. It allows users to easily measure pulsed sources and additive phase noise of RF components and signal sources such as generators, synthesizers and oscillators more quickly than with any other solution. With up to 50 GHz, the extremely low phase noise of its local oscillator and cross-correlation the FSWP performs complex measurements that in the past required complex test setups with just a push of a button.
www.rohde-schwarz.com
X-Microwave LLC
Booth 426
Online Nonlinear System Simulator
X-Microwave offers an online nonlinear system simulator that is powered by Keysight’s Genesys Spectrasys. Simulate with hundreds of models of real system components using the intuitive user interface. X-parameter or S-parameter models are extracted from X-Microwave ‘s drop-in components (X-MWblocks) using Keysight’s PNA-X analyzer. An X-parameter model of an amplifier serves as a live data sheet to determine the P1dB or IP3 at a given operating point of interest.
www.xmicrowave.com
Gigatest Labs
Booth 427
GTL-5050 Probing Platform
Gigatest Labs designs and manufactures precision probing systems and microwave probes for signal integrity applications. The GTL-5050 probing platform allows for testing a wide range of structures from flex-circuits to multiple-board-interconnects, BGAs, test sockets, PCBs and back-planes. The 5050 system’s remote-positioner control and HDMI video, offers a superior level of precision in the placement of test probes on the test structure, and improving accuracy in the measuement process. Visit Booths 427 and 526 to discuss your SI requirements
www.gigatest.com
Accel-RF Instruments
Booth 428
Automated Accelerated Reliability Test Systems
Accel-RF offers the world’s only line of fully integrated, modular platform, plug-and-play, completely automated accelerated life test systems. These systems deliver an unbeatable combination of capabilities needed for accelerated-aging and parametric testing of RF semiconductor devices. The company’s millimeter wave Automated Accelerated Reliability Test Systems (AARTS) and fixture solutions are available in standard frequency ranges from 26.5 to 67 GHz. Accel-RF’s customers receive maximum return-on-investment (ROI) through reduced product development time, demonstrated reliability, and increased “permission-to-play” market opportunities.
www.accelrf.com
MOSIS
Booth 429
Prototype and Volume-Production
For 30-plus years, IC designers have relied on MOSIS for an efficient, affordable way to prototype and volume-produce their devices. Many turn to MOSIS for our special expertise in providing Multi-Project Wafers (MPW) and related services that drive IC innovation. This “shared mask” model combines designs from multiple customers, or diverse designs from a single company, onto one mask set. In addition MOSIS supports clients through to production, minimizing time to market with competitive pricing for new product introduction.
www.mosis.com
Holzworth
Booth 504
HSX Series RF Synthesizers
Holzworth’s new HSX Series RF Synthesizers are phase coherent, multi-channel signal sources that offer industry leading phase noise (-142 dBc/Hz at 1 GHz, 10 kHz offset), spectral purity of better than -85 dBc (spurious), and output power dynamic range of +20 dBm to -110 dBm (0.01 dB of resolution). User defined configurations from 1 to 4 independently tunable RF outputs provide the best performance-to-price ratios in industry. 6 GHz models are currently available with 12 GHz and 20 GHz models available by late 2016.
www.holzworth.com
SemiGen Inc.
Booth 505
Semiconductor Diodes and Passive Products
SemiGen introduces a new line of semiconductor diodes and passive products. Their PIN, limiter, beam lead PIN, Schottky, step recovery and point contact diodes along with their capacitor, attenuator and additional passive thin-film products will be released in a new product catalog available in September 2016. The catalog will cover data and available designs of the company’s semiconductor products as well as their assembly and testing services.
www.semigen.net
Tektronix Inc.
Booth 506
Mixed Domain Oscilloscope
Tektronix will be showcasing the MDO4000C mixed domain oscilloscope that includes up to six built-in instruments, each with exceptional performance to address tough challenges. Every MDO4000C features powerful triggering, search and analysis, and these are the only scopes to offer synchronized analog, digital and RF signal analysis at the same time —ideal for wireless communications in IoT and EMI troubleshooting. The MDO4000C is completely customizable and fully upgradable to enable engineers to add the instruments as needed.
www.tektronix.com
Werlatone Inc.
Booth 508
SMT RF Components
Werlatone® has recently expanded its line of surface mount and drop‐in directional couplers, in‐phase combiners, and hybrid combiners. Concentrating on wider bandwidths at higher power levels, Werlatone’s designs are compact, low loss, and offer conservative power ratings. Their newest 90° quadrature design, model QH10541, covers the full 700 to 6000 MHz band; rated at 100 W CW. Measuring just 0.66"× 0.86"× 0.09", the QH10541 operates with excellent amplitude balance and less than 0.5 dB of insertion loss.
www.werlatone.com
JFW Industries Inc.
Booth 509
Rotary Attenuators
Introducing JFW’s newest family of manual, rotary attenuators, now offering more attenuation than ever before at 3 GHz and beyond. The single-rotor, 50R-397 is DC to 3 GHz with 0 to 70dB in 10 dB steps; while their benchtop assembly, the 50BR-147 allows for up to 110 dB in 1 dB increments. This family also includes two versions of JFW’s versatile dual-rotary attenuators, which can be easily integrated into RF systems for OEM or test applications.
www.jfwindustries.com
COMSOL Inc.
Booth 510
The RF Module
The RF Module, an add-on product to COMSOL Multiphysics® software, is used by designers of RF and microwave devices to model antennas, waveguides, filters, circuits, cavities and metamaterials. By simulating electromagnetic wave propagation and resonant behavior, engineers are able to compute electromagnetic field distributions, impedance, S-parameters, far field radiation pattern and power dissipation. With COMSOL Multiphysics® engineers are able to extend their model to include multiple physics effects such as temperature rise, structural deformations and fluid flow.
www.comsol.com/rf-module
LPKF Laser & Electronics
Booth 511
ProtoLaser S4 Laser System
The LPKF ProtoLaser S4 laser system uses a green laser wavelength and can laser etch PCBs in minutes on a wide range of laminated substrates, FR4 and PTFE or woven PCB materials. Prototypes and small production batches can also be produced on short notice if required The LPKF ProtoLaser S4 is even more precise than the mechanical systems and is therefore ideal for HF and microwave circuits, as well as digital and analog circuits.
www.lpkf.com
TechPlus Microwave Inc.
Booth 513
1U High VHF Duplexer
The TM1003 is a 1U High VHF duplexer operating between 135 to 172 MHz. TechPlus Microwave Inc. is a state-of-the-art, innovative, RF/microwave filter supplier specializing in economical, high quality microwave filters and assemblies. Their capabilities include small and large production runs utilizing state-of-the-art test equipment. TechPlus manufactures filters, duplexers and multiplexers for all of the wireless protocols, as well as spread spectrum for point-to-point, point-to-multipoint to 40 GHz.
www.techplusmicrowave.com
CST-Computer Simulation Technology AG
Booth 515
CST STUDIO SUITE®
The electromagnetic simulation software CST STUDIO SUITE® is the culmination of many years of research and development into the most accurate and efficient computational solutions for electromagnetic designs. It comprises CST’s tools for the design and optimization of devices operating in a wide range of frequencies—static to optical. Analyses may include thermal and mechanical effects, as well as circuit simulation.
www.cst.com
Maury Microwave
Booth 521
Measurement and Modeling Device Characterization Solutions
Exceptional companies have superior labs —complete your lab with Maury Microwave. Maury, a leader in measurement and modeling device characterization solutions, VNA calibration accessories and interconnections, will be showcasing active and hybrid-active harmonic load pull solutions, LXI™-certified mechanical impedance tuners, pulsed IV/RF compact transistor modeling as well as coaxial and waveguide VNA calibration kits and metrology adapters, in-stock color-coded precision and daily-use adapters, and test-port, phase-stable and value cable assemblies. Visit Maury for details, demos, deals and NPIs.
www.maurymw.com
TowerJazz
Booth 523
Integrated Circuits
TowerJazz’s industry leading RF SOI technology, coupled with its advanced design enablement tools that include modeling of the substrate, are ideally suited for designing low insertion loss and highly linear multi-throw switches, and LNAs with very low noise figures and high linearity. TowerJazz also offers a new integrated SiGe-based “FEM-on-a-Chip” RF BiCMOS platform tailored to meet the challenges of IoT and other wireless applications by enabling PAs, LNAs and switches on a single chip.
www.towerjazz.com
Mentor Graphics
Booth 527
HyperLynx® Full-Wave Solver
Mentor Graphics’ HyperLynx® full-wave solver delivers unprecedented speed and capacity, through accelerated boundary element technology, while preserving gold-standard Maxwell accuracy. Achieve greater accuracy and fewer re-spins, even on the most complex structures.
www.mentor.com/pcb
Wenzel Associates Inc.
Booth 528
Multiplied Crystal Oscillator
The typical multiplied crystal oscillator (MXO) is comprised of Wenzel’s industry-leading VHF ultra low noise OCXO integrated with several low noise multiplier stages. Options such as phase locking (PLL) can also be specified on some models to phase lock to an external reference. The golden multiplied crystal oscillator series (GMXO) offers the same options as the MXO series oscillators, but provides superior phase noise performance. Wenzel’s latest ultra-low noise oscillator technology and special multiplier stages are combined in the golden series products to allow a phase noise floor improvement of up to 10 dB.
www.wenzel.com
Ophir RF Inc.
Booth 529
RFPA System
Using the latest in GaN technology, Ophir RF introduces model 5294 (700 to 6000 MHz, 100 W). This RFPA system achieves very high linearity, and delivers full power even into poor load conditions. As with all Ophir RF amplifier systems, model 5294 comes with a standard three year warranty.
www.ophirrf.com
AR RF/Microwave Instrumentation
Booth 606
Solid-State Pulsed Amplifiers
For automotive and military EMC radiated immunity susceptibility testing, as well as radar and communication applications, there is now a very attractive alternative to traveling wave tube amplifiers (TWTAs). AR’s new offerings include various frequency ranges and output power levels to meet several standards, or designs can be tailored to suit your specific application. These amplifiers feature a touchscreen control panel, GPIB interface, TTL gating, fault monitoring and forced air cooling.
www.arworld.us
Dynawave
Booth 607
ArcTite™ Assemblies
Dynawave’s new ArcTite™ series cable assemblies provide tight bend radius capability without the need for added strain relief shrink boots. ArcTite™ assemblies can provide less than a 0.54"(13.7 mm) height from connector reference plane to the top of the bent cable. Ideal for high density packaging, these assemblies are available with SMA straight plugs or SMA bulkhead jacks connectors in both 0.086 and 0.141 cable sizes. ArcTite™ assemblies have consistent (-100 dB) shielding and low VSWR through 26.5 GHz.
www.dynawave.com
Barry Industries Inc.
Booth 610
HTCC Air-Cavity Quad-Flat-No-Lead (QFN) Packages
Barry Industries introduces their line of hermetically sealable HTCC Quad-Flat-No-Lead (QFN) packages with air cavity for high frequency applications. These QFN packages are available in six sizes from 3 mm to 8 mm with standard JEDEC MO-220 footprints. They feature broadband low-loss transitions for superior performance over frequency. Maximum insertion loss is 0.5 dB from DC to 18 GHz, 1.5 dB from 18 to 35 GHz and 4 dB from 35 to 40 GHz. HTCC construction provides for enhanced mechanical strength and higher thermal conductivity compared with LTCC packages.
www.barryind.com
Amplical Corp.
Booth 612
PIN Diode Switches
Amplical Corp.’s family of broadband coaxial PIN diode switches feature low insertion loss, low VSWR high isolation, and fast switching speed. Standard configurations range from single-pole, single-throw (SPST) through single-pole, 12-throw (SP12T). All switches are available with either absorptive or reflective inputs operating over ultra-broad bandwidths up to 20 GHz. Amplical offers complete electrical and mechanical customization for all standard models as well as your application-specific requirement up to 40 GHz, including unlimited number of throws, high power, hermetic seal and MIL/hi-rel screening.
www.amplical.com
NoiseWave
Booth 612
Amplified Noise Source
NoiseWave announces the immediate availability of the NW3G-M amplified noise source. The NoiseWave NW3G-M features broadband frequency coverage from 10 MHz to 3 GHz. The NW3G-M offers 0 dBm output power with spectral flatness of ± 2.0 dB. The unit is internally regulated and operates from +15 Vdc and typically draws less than 120 mA. The NoiseWave NW3G-M comes standard with an sma output connector and is in a small low profile housing 4"× 1"× 0.5".
www.noisewave.com
ARC Technologies Inc.
Booth 613
Engineer’s Survival Kit
ARC Technologies is the leading supplier of RF and EMI absorbing materials. Whether you are facing problems at 10 MHz or 110 GHz, near field or far field, narrowband or broadband, ARC Technologies has the right solution, offering a variety of standard and custom products. Their FREE Engineer’s Survival Kit (ESK) offers samples of several popular products that no RF or electrical engineer should be without.
www.arc-tech.com/engineers-survival-kit/
Electro Rent Corp.
Booth 615
Design Software
When you need test equipment you need to decide “what” but also “justify” that new expense. Electro Rent’s product showcase focuses on solving real-world testing problems both technically and financially. Design software new to Electro Rent: IMST, Germany, offer unique software design tools, specializing in radio technologies and microelectronics. Digital Testing: as RF signals get faster and more complex, new digital testing techniques are necessary. Electro Rent offers the most RF/microwave instruments in inventory.
www.electrorent.com
Berkeley Nucleonics Corp.
Booth 622
Signal Generator
The Model 855 series is a multi-channel, phase coherent, fast switching, low phase noise microwave signal generator with output frequency ranges from 10 MHz to 6, 12 or 20 GHz in any combination from 2 to 8 outputs in one system. Frequency and power switching sweep times down to 10 µs with excellent phase noise makes this instrument line ideally suited for a wide range of applications where very high signal quality, accuracy and wide output power range is required.
www.berkeleynucleonics.com
PPG Aerospace-Cuming Microwave
Booth 624
Microwave Absorbers
PPG Aerospace-Cuming Microwave is a manufacturer of microwave absorbers for cavity suppression and free space applications. Its featured product is C-RAM™ RGD-S, an iron filled silicone rubber microwave absorber with a high magnetic loss. It is available in three grades: -117, -124 and -192. C-RAM™ RGD-S can be used for lowering the Q of cavities and eliminating unwanted resonances. Other products include: C-RAM™ Lossy Foams and Elastomeric Flat Sheet Absorbers, C-RAM™ Anechoic & Free-Space Materials, C-RAM™ Turnkey Anechoic & EMC Chamber Design and Installation, and C-STOCK™ Low Loss Dielectric Materials. Custom formulations and fabrications are available. Email cmcsales@ppg.com or call (508) 521-6700.
www.cumingmicrowave.com
Sonnet Software
Booth 628
Sonnet Suites Release 16
Sonnet Software maintains a single, dedicated focus on providing the industry’s most accurate and reliable high frequency electromagnetic (EM) software. Sonnet recently premiered Sonnet Suites Release 16, featuring speed increases in larger projects, new integration with the Modelithics® CLR Library for Sonnet, and additional new features that give users more control and automation. Sonnet Suites targets today’s demanding design challenges involving predominantly planar (3D planar) circuits and antennas, including spiral inductors, filters, microstrip, stripline, co-planar waveguide, and both PCB and integrated circuits incorporating layers of stratified dielectric material.
www.sonnetsoftware.com
Gowanda Electronics
Booth 704
Broadband Conicals to 5A DC
Gowanda Electronics will feature new component designs including the C550FL series of high-current, thru-hole, wirewound broadband conical inductors providing a current rating to 5A DC. As with Gowanda’s other conicals, the new series provides predictable frequency response and repeatable performance from 40 MHz to 40 GHz and is specifically designed for high frequency applications where ultra-low insertion loss is a design requirement. Gowanda Electronics’ conicals and RF & power inductors, Communication Coil’s custom magnetics, TTE’s RF & microwave filters and Instec’s EMI/RFI filters will all be on display; all are affiliates of Gowanda Holdings.
www.gowanda.com
TTE Filters
Booth 704
Bias Tees to 40 GHz
TTE’s bias tees are now available for frequencies from 10 MHz to 40 GHz and current handling to 7A DC. They offer superior broadband performance, low insertion loss, minimal return loss, desirable VSWR characteristics, extremely flat gain response and RoHS-compliant options. TTE’s RF & microwave filters are available to 26 GHz, featuring built-to-order lead times as short as 3 to 5 days. TTE’s filters, Gowanda Electronics’ conicals and RF & power inductors, Communication Coil’s custom magnetics and Instec’s EMI/RFI filters will all be on display; all are affiliates of Gowanda Holdings.
www.tte.com
Nuhertz Technologies LLC
Booth 706
FilterSolutions®
Nuhertz Technologies introduces a version of FilterSolutions.® Version 14.4.1 features the design of inverted microstrip filters in suspended substrate, with overlay capacitors utilizing interlaced resonators to achieve coupling. The approach removes the need for vias. The sample filter shown is a nine-pole interlaced high-pass Chebyshev. The design is shown after synthesis by FilterSolutions, without post-processing or optimization. Rapid Sonnet or Axiem port-tuning is supported. Nuhertz will present this version at Booth 706.
www.nuhertz.com
SignalCore Inc.
Booth 707
High Performance 20 GHz Signal Source
SignalCore’s high performance 20 GHz VCO-based synthesized signal source is cost effective, compact and designed for seamless integration. With frequency spanning 100 MHz to 20 GHz (1 Hz resolution), low phase noise of -115 dBc/Hz at 10kHz offset at 10 GHz carrier, and amplitude step resolution of 0.01 dB over a -30 dBm to +10 dBm output range, this product is ideal for R&D, academic, military and commercial applications. Full implementation instructions and GUI included. Available in USB, SPI, RS-232, and PXIe.
www.signalcore.com
Centerline Technologies
Booth 708
Glass and Ceramic Materials
Centerline Technologies will be showcasing beveled, grooved, slotted and diced glass, fused silica and ceramic materials. Centerline’s recently expanded diamond sawing capabilities provide superior edge quality using optical alignment and provides tighter tolerances (accuracy ±.0003" repeatability within .0001"). Centerline subdivides fully patterned substrates with computer programmed auto recognition software. Other services on display will include lapping, polishing, laser machining, diamond sawing, back-lapping, and filled via planarity process. Centerline is dedicated to providing the highest quality services at the greatest value possible.
www.centerlinetech-usa.com
Integra Technologies Inc.
Booth 711
1200W GaN Transistor
Integra Technologies Inc. (ITI), a designer and manufacturer of high-power RF transistors, pallets and amplifiers, announced the release of a 1200 W GaN transistor, IGN1011L1200, for IFF avionics applications. The IGN1011L1200 operates over the instantaneous bandwidth of 1.03 to 1.09 GHz. Under ELM Mode S (48 × (32µs on, 18µs off), 6.4%) pulsing conditions, it supplies a minimum of 1200 W of peak output power with typically >17dB gain and 75% efficiency from a 50 V supply voltage. The IGN1011L1200 transistor is available immediately for sampling.
www.integratech.com
dBm Corp Inc.
Booth 713
Advanced Channel Emulator
dBmCorp Inc. will release its Advanced Channel Emulator (ACE), an ultra-high bandwidth (600 MHz) high fidelity test platform for radio/satellite link, multipath fading and payload emulation. The ACE can emulate changing delays, carrier/signal Doppler, phase shift, link attenuation and sophisticated multipath (up to 12 paths at 600 MHz bandwidth per channel) for emulating all types of wireless and COM links. Programmable group delay, phase offset, AM/AM & AM/PM nonlinearity and amplifier gain compression/distortion may be emulated in real-time.
www.dbmcorp.com
NXP Semiconductors
Booth 714
GaN Power Transistor
NXP introduces the high performance A2G26H281-04S in-package asymmetric Doherty GaN RF power transistor for 2496-2690 MHz targeting current and next-generation cellular base stations. This product enables NXP customers with an average RF output power of 50 W (288 W peak), gain of 15.3 dB and drain efficiency of 57% configured in a NI-780S-4L air-cavity ceramic package. The A2G26H281-04S GaN device offers superior performance at higher frequencies which is key to the expanding 4G LTE deployments and emerging 5G marketplace.
www.nxp.com/RFgan
Copper Mountain Technologies
Booth 715
Vector Network Analyzer
Copper Mountain Technologies’ S5065 is a highly compact lab-quality USB vector network analyzer for S-parameter measurements from 9 kHz to 6.5 GHz. It is capable of >138 dB dynamic range typ. (1 Hz IF) and measurement time per point of 60 µs, min typ. Thanks to its unmatched portability, S5065 can be shared easily within a team or brought to test sites.
www.coppermountaintech.com
Dow-Key Microwave
Booth 720
Standard Matrix Summary
Designed for microwave, RF and audio test applications in the DC to 18 GHz frequency range, Dow-Key’s standard matrix product line includes standard configurations ranging from 1 × 100 to 12 × 12. Packaged in a self-contained 19" rack-mountable enclosure and provided with remote interfaces such as RS232, RS-422, GPIB, USB and Ethernet along with a touchscreen LCD front panel display or keypad for manual override. Dow-Key uses its own line of coaxial switches for these matrices, providing low loss and excellent isolation.
www.dowkey.com
K&L Microwave
Booth 720
Ultra-miniature Lumped Element Filters
Ultra-miniature lumped element filters provide reduced size and weight while affording ultimate flexibility. Bandpass, lowpass, highpass and notch filters, including elliptic and pole placed designs are available in very small surface mount packages. Integrated covers assure performance in sizes typically less than 0.2" wide by 0.15" tall. Join K&L at Booth 720 to discuss your custom requirements.
www.klmicrowave.com
Pole/Zero Corp.
Booth 720
Extended Range Filters
Pole/Zero is showcasing the production release of its new NANO-ERF® series of extended range filters that covers the entire 30 to 520 MHz tuning range in a single 28 × 28 × 0.216 mm surface-mount package. Tuning speeds are 25 µsec typical, 35 µsec max with inband RF power handlings of +6 dBm. Pole/Zero’s complete product line includes tunable filters, integrated cosite equipment and low noise and cosite power amplifiers.
www.dovermpg.com/polezero
Millitech
Booth 721
E-Band Linear-Circular Polarizer
Millitech’s E-Band linear-circular polarizer boasts a low axial ratio of < 0.6 dB, low insertion loss of < 0.5 dB, and can be optimized for any frequency you require from 18 to 110+ GHz. With over two times the bandwidth of similar products and an industry leading axial ratio performance, this polarizer is a first of its kind.
www.millitech.com
Booth 804
PMI A Series Amplifiers
PMI’s A-Series amplifiers are available low noise, medium power and lost cost designs and operate over the 10 MHz to 40 GHz frequency range. These new models feature form fit & function design, low noise figure, operating temp: -54° to +85°C, unconditionally stable over temperature, excellent group delay and phase linearity, field replaceable SMA connectors, internal DC regulated voltage and internal reverse polarity protection available options temperature compensation, phase & amplitude matching, phase and amplitude tracking, gain /frequency slope and input limiter protection. Custom designs welcome.
www.pmi-rf.com/Products/amplifiers/PMI-A-Series-Amplifiers.htm
Richardson RFPD
Booth 806
Specialized Electronic Component Distribution
Richardson RFPD, an Arrow Electronics company, is a specialized electronic component distributor providing technical expertise and global design support for the latest products from leading suppliers of RF, wireless, energy and power technologies. Richardson RFPD offers the newest products from leading suppliers of RF and wireless technologies to more than 10,000 customers, through their sales team of engineering experts. The company supports the design efforts of RF engineers in markets such as A&D, cellular infrastructure, ISM, CATV, T&M and IoT/M2M.
www.richardsonrfpd.com
Marvin Test Solutions
Booth 808
TS-960 Semiconductor Test System
The TS-960 semiconductor test system from Marvin Test Solutions is an integrated test platform that takes full advantage of the PXI architecture to provide capabilities comparable to proprietary ATE systems in a compact footprint. The TS-960 is available in benchtop and integrated manipulator configurations for both package and wafer test. Offering 20 PXI slots and a receiver that supports digital and RF resources, the TS-960 can support a wide range of digital and RF capabilities.
www.marvintest.com
MathWorks
Booth 810
RF Budget Analyzer
The RF Budget Analyzer in RF Toolbox helps engineers design RF front-ends and get started with RF modeling and simulation. This helps teams efficiently iterate between system-level specifications and implementation of architectural designs, and reduces time spent in debugging validation test benches. Engineers can rapidly build executable specifications of the RF front-end and integrate the results into a system-level simulation. This allows for help with validation of behavior and, by facilitating sharing, supports collaboration with colleagues, suppliers and customers.
www.mathworks.com
Passive Plus Inc.
Booth 814
RF/Microwave Passive Components
Passive Plus Inc. (PPI) is a manufacturer of high-performance RF/microwave passive components, specializing in high-Q/low ESR/ESL capacitors, rroadband capacitors, non-magnetic resistors and trimmers serving the medical, semiconductor, military, broadcast and telecommunications industries. Capacitor case sizes include 0505, 1111, 2225, 3838; EIA 0201, 0402, 0603, 0805; High power 6040, 7676 and the new 1313; Broadband capacitors, 01005, 0201, 0402. PPI is known for outstanding quality, fast deliveries, competitive prices and superior customer service.
www.passiveplus.com
Orban Microwave
Booth 820
Antennas
Orban Microwave designs and manufactures a wide range of antennas for various applications such as GPS, avionics, medical and satcom covering VHF to Ka-Band. One of our strengths regarding GPS antennas is our wide variety of existing designs like choke ring antennas, rover antennas and passive and active antennas that can be integrated in GPS receivers. Orban Microwave offers the latest in technology, custom built to your specifications.
www.orbanmicrowave.com
Pickering Interfaces
Booth 822
PXI Microwave Multiplexer Modules
Pickering’s multiplexers have a characteristic impedance of 50 Ω and are capable of switching signals up to 40 GHz. Available in single, dual or triple, SP6T or SP4T formats, they are suitable for constructing complex microwave switching networks. These multiplexers are compatible with any PXI chassis and can be used in Pickering’s LXI Modular Chassis for users preferring control via an Ethernet port. Connection is by a high performance front panel mounted SMA or SMA-2.9 connectors.
www.pickeringtest.com
Mercury Systems
Booth 826
OpenRFM™ Rapid Development Capability
OpenRFM™ is a modular open systems architecture approach that standardizes the electromechanical, software, control plane, and thermal interfaces. Based on the OpenRFM™ architecture, Mercury and X-Microwave have created an ecosystem of hundreds of pre-engineered RF/microwave elements that facilitate the rapid development and prototyping of complex designs. Elements are laid out creating the RF design which can then be simulated, prototyped and verified. It is then packaged in an OpenRFM™ pre-engineered brick. Workshop at EDICON USA September 20 at 1:30 p.m.
www.mrcy.com
Colby Instruments
Booth SI7
Programmable Delay Line Instruments and Modules
Programmable delay line instruments and modules offering 0 to 200.0 ns of total delay with resolution to 0.50 ps per step in various configurations. Signal input frequency from DC to 18 GHz. Remote programmable interface via Ethernet TCP/IP, GPIB, or local control using MicroTerminal and Keypad.
www.colbyinstruments.com